2X LED License Plate Light Red DRL Tube Lamp For Silverado GMC Sierra 1500 2500

Give the rear of your GM truck or SUV a head-turning custom look without cutting a single wire. These 2-piece LED License Plate Lights combine legal 6000K white plate illumination with a bold red OLED U-shape DRL accent tube — a direct, plug-and-play upgrade over your worn-out factory lamps that takes under 15 minutes to install. COMPATIBILITY This set is engineered to replace the OEM license plate lamp on a wide range of popular GM trucks and SUVs built between 1999 and 2014. Confirmed fitments include the 1999-2013 Chevrolet Silverado 1500, 2001-2006 Silverado 1500 HD, 1999-2004 Silverado 2500, 2001-2014 Silverado 2500HD, 2001-2014 Silverado 3500, and corresponding GMC Sierra 1500, Sierra 1500HD, Sierra 2500, Sierra 2500HD, and Sierra 3500 model years across the same production window. Coverage also extends to the 2002-2013 Chevrolet Avalanche, 2000-2006 Chevy Suburban 1500 and 2500, and 2000-2006 Chevy Tahoe. Each unit is designed for exact OEM mounting points, eliminating any need for drilling, cutting, or bracket modifications. Before ordering, verify your vehicle's trim level and confirm your existing license plate lamp housing shape matches the factory-style oval pocket used on these generations. KEY BENEFITS • Direct drop-in replacement — snaps into OEM mounting points with no wiring changes, no extra hardware, and no special tools required. • CAN-bus error-free and OBDII compatible, so your instrument cluster stays clean with zero bulb-out warning lights or error codes on late-model GM trucks. • Dual-color output delivers brilliant 6000K cool white light for fully legal plate visibility alongside a distinctive red OLED U-shape neon accent tube for a show-quality DRL appearance. • Waterproof construction is sealed against rain, road spray, automatic car washes, and extreme seasonal temperature swings from desert heat to northern winter cold. • Ultra-low power draw compared to incandescent bulbs reduces load on your alternator and helps preserve battery health over the long term. • Backed by a 1-year manufacturer warranty against defects in materials and workmanship, giving you confidence in the investment. TECHNICAL SPECIFICATIONS • Light source: dual-function LED array (white) + red OLED U-shape accent tube • White output color temperature: 6000K cool white • Accent color: red OLED neon-style glow • Operating voltage: 12V DC (standard automotive) • CAN-bus / OBDII error-free: Yes — no resistor required • Waterproof rating: IP67-equivalent sealed housing • Connector type: OEM plug-and-play — matches factory GM wiring harness • Kit quantity: 2 units (complete set, one per side) MATERIALS AND BUILD QUALITY The housing of each lamp is molded from high-impact ABS plastic, the same material class used in OEM automotive lighting components. ABS resists cracking under vibration and impact, holds dimensional stability across temperature extremes ranging from sub-zero winter starts to scorching summer parking lots, and does not yellow or become brittle under prolonged UV exposure the way older polycarbonate or polypropylene housings sometimes do. The lens face is optically clear, allowing the 6000K white LED array to project a sharp, even wash of light across your license plate without hot spots or shadows. The red OLED U-shape accent tube is embedded within the housing perimeter and runs on a separate circuit path, meaning the accent glow operates independently of the white plate illumination. All external seams are sealed to prevent moisture intrusion, giving the assembly effective waterproof protection equivalent to an IP67 rating. Internal solder connections are protected against vibration fatigue, which is a common failure point on cheaper LED replacement lamps. The result is a premium-feeling assembly that looks OEM from the outside while delivering modern LED performance and a custom styling cue inside. INSTALLATION GUIDE Installation requires no special tools beyond a flathead or trim removal pry tool. Work in a safe, well-lit area with the vehicle parked and the ignition off. Step 1: Locate the two factory license plate lamp assemblies on the rear of your truck or SUV, positioned above or flanking the plate pocket. Step 2: Using a small flathead screwdriver or trim pry tool, carefully release the retaining tab or unscrew the single fastener holding the OEM lamp housing in place — most GMT800 and GMT900 platform trucks use a twist-and-pull quarter-turn socket or a simple tab clip. Step 3: Pull the factory lamp housing out far enough to access the wiring connector. Step 4: Depress the connector tab and unplug the factory harness from the original bulb socket. Step 5: Plug the new LED license plate light's OEM-style connector directly into the same harness socket — no splicing, no adapters. Step 6: Seat the new LED housing into the mounting pocket and press or twist to lock until you feel it click firmly. Step 7: Repeat on the opposite side. Step 8: Restore power, turn on your headlights or parking lights, and verify both white plate illumination and red DRL accent tube are operating correctly. Check your dashboard for any warning indicators — the CAN-bus error-free design should keep the cluster clear. Total job time is typically 10 to 15 minutes for someone with basic mechanical comfort. WHAT'S IN THE BOX • 2x LED License Plate Light assemblies (left and right) • OEM plug-and-play wiring connectors (pre-attached) • 1-year warranty documentation WHY SHOP WITH US We source lighting products that meet or exceed OEM fitment standards for the US automotive aftermarket. Every LED license plate light set we carry is tested for CAN-bus compatibility and waterproof integrity before it ships. Our listings include verified year-make-model compatibility data, real installation guidance written by people who work on trucks, and responsive customer support. We offer fast US-based order handling with a 2-business-day dispatch target so your parts arrive when you expect them. If you have a fitment question before ordering, reach out — we would rather confirm compatibility upfront than process a return. Ready to transform the rear of your Silverado, Sierra, Tahoe, Suburban, or Avalanche with a clean LED upgrade that takes less time than a coffee break? Add this 2-piece LED License Plate Light set to your cart today and drive away with a sharper, more modern look tonight.