For T Oyota 00-06 Tundra Extended Cab Slim Style Window Visor Rain Sun Guard 4PC

Stop letting weather dictate how you drive your first-gen Tundra. Mankee's slim-style window visors are built exclusively for the 2000-2006 Toyota Tundra Extended Cab, giving you fresh air, UV protection, and a factory-clean look — rain or shine. COMPATIBILITY This 4-piece kit is designed specifically for the 2000, 2001, 2002, 2003, 2004, 2005, and 2006 Toyota Tundra Extended Cab, also marketed as the Access Cab. The kit covers all four door openings: two full-size front doors and two rear half-doors unique to the Extended Cab layout. This is a vehicle-specific, application-direct fitment — not a universal kit. The visor profiles are molded to match the factory door frame geometry of the first-generation Tundra platform, ensuring a flush, gap-free fit that looks like it came from the Toyota assembly line. Before placing your order, verify your cab style is Extended Cab or Access Cab. This kit does not fit the Regular Cab (two-door) or the Double Cab (four full-size doors) variants of the same generation. KEY BENEFITS • Rain ventilation without moisture intrusion — keep your windows cracked during downpours and let fresh air circulate without letting a single drop inside. Ideal for long hauls, job sites, and humid climates. • UV and glare reduction — the visor lip blocks harsh sun angles when windows are partially open, cutting interior heat buildup and preventing dash and upholstery fade over time. • Low-profile slim design — sits tight to the door frame so your Tundra keeps its aggressive, purposeful stance without the oversized, tacked-on look of full-depth deflectors. • Highway wind noise reduction — minimizes turbulence buffeting when windows are cracked at speed, a common pain point with larger-format deflectors that catch more air. • Cold-weather de-misting — allows a controlled airflow gap in winter mornings, helping door glass clear faster without fully exposing the cabin to freezing temperatures. • Complete front-to-rear coverage — all four windows protected in one kit, so no door is left unguarded against rain, glare, or wind. TECHNICAL SPECS • Fitment years: 2000, 2001, 2002, 2003, 2004, 2005, 2006 • Compatible model: Toyota Tundra Extended Cab / Access Cab (1st Generation) • Pieces per kit: 4 (2 front door visors + 2 rear half-door visors) • Design profile: Slim / low-profile, OEM-style contour match • Mounting method: Channel-mount or tape-assist adhesive (installation hardware included) • Finish: Matte dark smoke / black tint — UV-stabilized to resist fading • Ventilation gap compatibility: Works with windows cracked 1–4 inches • Package weight: Approximately 1.5 lbs for the complete 4-piece set MATERIALS & BUILD QUALITY Mankee engineers these window visors from high-impact ABS plastic — the same class of engineering-grade thermoplastic used in OEM automotive trim components. ABS plastic delivers an ideal balance of rigidity and flexibility: stiff enough to hold its molded profile under highway wind loads, yet forgiving enough to absorb minor flex without cracking. The outer surface carries a UV-stabilized dark smoke finish that resists solar degradation, meaning your visors won't turn chalky, brittle, or discolored after seasons of sun exposure. Each piece is molded to exact first-gen Tundra door frame tolerances, producing crisp edges and consistent wall thickness throughout. The mounting channel and adhesive strip (where applicable) are designed to bond permanently to the window channel without damaging factory paint or seals. Unlike cheaper universal deflectors cut down to approximate size, these are produced as dedicated Tundra parts — you'll feel the difference the moment you test-fit the first piece. INSTALLATION GUIDE Installing your Mankee Tundra window visors is a straightforward DIY job requiring no drilling, no cutting, and no professional help. Plan for 30–45 minutes total. Start by washing and thoroughly drying all four door window channels and the surrounding trim — any dust, wax, or road grime will compromise adhesion. Open all four doors fully to give yourself clear access. Begin with the driver-side front visor: slide the forward edge of the visor into the top of the window channel until it seats firmly, then work the visor rearward along the channel until it lies flush along its full length. If your kit includes a 3M adhesive backing strip, peel the liner and press the visor firmly against the door frame for 30–60 seconds, applying even pressure across the full length. Repeat for the passenger front door. For the rear half-doors, the same channel-mount process applies — the shorter profile of the rear pieces makes them slightly easier to seat. Once all four visors are installed, close each door and inspect for gaps or misalignment. Apply firm hand pressure to any section that hasn't bonded fully. Allow the adhesive to cure for at least 24 hours before exposing the vehicle to rain or a car wash. Do not wash the vehicle or roll windows up and down aggressively for the first 48 hours. WHAT'S IN THE BOX • 2x front door window visors (driver and passenger) • 2x rear half-door window visors (driver and passenger) • Installation adhesive tape or channel clips (hardware included) • Instruction sheet WHY SHOP WITH US We stock vehicle-specific fitment parts for domestic and import trucks, vans, and commercial vehicles — not generic catalog padding. Every SKU on our site is verified against OEM body style data before it goes live, so you're not guessing at fitment. Our US-based support team can confirm compatibility for your exact Tundra build before you buy. We offer competitive flat-rate shipping across the contiguous US, and our hassle-free return policy means if a part doesn't fit as described, we make it right — no runaround. Ready to give your 2000-2006 Toyota Tundra Extended Cab year-round weather protection with a clean, low-profile look? Add the Mankee 4-piece slim window visor kit to your cart today and drive with your windows cracked — whatever the forecast.