For Freightliner Cascadia 2018, Pair Chrome Heated Hood Mirror W,Turn Signal LED

When you're hauling freight through mountain passes in January or merging onto a crowded interstate at dawn, the last thing you need is a fogged-out, frosted mirror. These chrome heated hood mirrors with integrated LED turn signals are built specifically for the 2018 Freightliner Cascadia — giving you the clear sightlines and road presence your rig demands, every mile of every run. These mirrors are engineered as a direct-fit replacement for the 2018 Freightliner Cascadia only. The mounting points, bracket geometry, and wiring harness connectors are matched to the factory specifications of that model year, allowing for a straightforward swap without cutting, splicing, or fabricating custom brackets. Before placing your order, confirm your Cascadia's trim level and existing mirror connector configuration to ensure full plug-and-play compatibility. If your truck has previously been retrofitted with non-OEM mirrors or wiring, a quick inspection of your harness ends is recommended. This set is sold as a matched pair — one driver-side (left) and one passenger-side (right) — so you restore both sides of the cab in a single purchase rather than hunting down a matching unit separately. • Built-in heating element eliminates frost, ice, and condensation from the mirror surface, keeping your field of view clear during cold-weather hauls across the Rockies, Great Plains, and northern corridors without manual intervention. • Integrated amber LED turn signals broadcast your lane-change and merge intentions to surrounding traffic, dramatically improving your visibility to four-wheelers and other commercial drivers alike — a critical safety upgrade on any heavy-duty rig. • Chrome-plated exterior shell delivers a clean, professional finish that matches factory-style aesthetics and resists the oxidation and pitting that plagues painted or bare-plastic housings over time. • Sold as a matched pair — driver side and passenger side included — giving you a symmetrical, uniform appearance across both sides of the cab without the hassle of ordering units separately. • Direct-fit design means no drilling, no cutting, and no custom wiring adapters required for trucks that match the specified year and connector configuration. • Replaces cracked shells, dead heating elements, or burnt-out turn signals in a single swap, restoring full OE-style functionality to a high-mileage Cascadia without dealer-level pricing. • Fitment: 2018 Freightliner Cascadia (both driver and passenger side) • Quantity: 1 pair (1x left / driver-side, 1x right / passenger-side) • Finish: Chrome-plated exterior shell • Turn Signal Type: Integrated LED amber indicator • Heating Function: Built-in resistive heating element; activates via factory mirror heat circuit • Mirror Glass Type: Flat (verify OEM spec for your Cascadia configuration) • Connector Type: Matches OEM harness on 2018 Cascadia — verify before ordering • Operating Temperature Range: Heating element effective in sub-freezing conditions down to typical North American winter extremes The outer shell on each mirror is constructed from impact-resistant ABS plastic finished with a multi-layer chrome plating process that bonds tightly to the substrate for lasting adhesion. This chrome finish does more than look sharp on the road — it reflects heat away from the housing and resists the UV-driven yellowing and cracking that defeats cheaper painted finishes within a season or two of regular operation. The internal heating element is a precision-wound resistive mat bonded directly behind the mirror glass, ensuring even heat distribution across the entire reflective surface rather than just the center. The LED turn signal module is factory-sealed against moisture intrusion, which matters on a commercial truck that gets pressure-washed regularly. Every component in this assembly is designed to survive the vibration, temperature cycling, and road debris exposure that come standard on a long-haul Cascadia, so your investment holds up from the first delivery run through the thousandth. Installing this pair is a straightforward job that most owner-operators and fleet shop technicians can complete with basic hand tools in under two hours. Start by parking the Cascadia on a level surface and turning off all electrical systems. Open the hood to access the mirror mounting hardware from above — the Cascadia's hood mirror mounts are accessible once the hood is fully propped. Disconnect the factory wiring harness connector from each existing mirror; take a photo of the connector orientation before disconnecting as a reference. Remove the retaining bolts or nuts securing the old mirror to the mounting bracket (typically 10mm or 13mm on the Cascadia platform — confirm with your shop manual). Lift the old mirror assembly clear of the bracket. Position the new mirror on the bracket, aligning the mounting holes precisely before inserting and hand-tightening the hardware. Reconnect the wiring harness — the connector is keyed and will click firmly into place when fully seated. Repeat for the opposite side. Once both mirrors are mounted and connected, lower the hood, restore electrical power, and test the heating function by activating your mirror defrost switch and the turn signals using your dash controls. Confirm full LED activation and even glass warming before your next dispatch. • 1x Driver-side (left) chrome heated hood mirror with LED turn signal • 1x Passenger-side (right) chrome heated hood mirror with LED turn signal • Required mounting hardware (verify with product listing for included fasteners) At Expedite, we stock parts built for commercial operators who cannot afford downtime. Every product in our commercial truck category is selected for direct-fit compatibility, real-world durability, and honest pricing — no markups disguised as "dealer exclusives." Our product listings are written by people who understand semi-truck specifications, not algorithmic content farms. When you order a pair of mirrors from us, you get exactly what's described: a matched set engineered for your specific year and model, shipped promptly so your Cascadia gets back on the road. Stop squinting through a fogged mirror or running with a dead turn signal that's a citation waiting to happen. Order this chrome heated hood mirror pair for your 2018 Freightliner Cascadia today. With both driver and passenger sides in one purchase at $118.80, you're getting full restoration at a fraction of dealership pricing. Add to cart now and keep your sightlines sharp from the first cold-morning startup of the season to the last load of the year.