10x LED Clearance Side Marker Light Amber Red Lamp Truck Trailer Lorry Caravan

Keep your rig DOT-legal, visible, and running at full capacity with this 10-pack of high-intensity LED clearance side marker lights in both amber and red. Built for the demands of American commercial operators — long-haul drivers, fleet managers, and owner-operators alike — these compact lamps deliver instant, high-visibility illumination that outperforms aging incandescents while dramatically cutting your operating costs over time. Compatibility These universal LED side marker lights are engineered for a wide range of heavy-duty and medium-duty commercial applications across the US market. They are a direct-fit replacement for Class 3 through Class 8 trucks including the Freightliner Cascadia, Kenworth T680, Peterbilt 389, International LT, Volvo VNL, and Mack Anthem. For medium-duty and last-mile delivery fleets, these lights are equally at home on box trucks, step vans, Ford Transit cargo vans, Ram ProMaster, Chevrolet Express, and GMC Savana. On the trailer side, the standard oval-mount footprint slots directly into existing OEM and aftermarket cutouts found on 48- and 53-foot dry vans, flatbeds, refrigerated trailers, and lowboy decks. RV owners, horse trailer operators, and caravan enthusiasts will find the low-profile housing drops right in where old incandescent bullet lamps once lived. Always verify your existing cutout dimensions before ordering to confirm fitment on non-standard bodies. Key Benefits • Instant-on LED performance — full brightness from the first millisecond with zero warm-up lag, maximizing reaction time for drivers behind you at highway speeds • Dual-color value in one kit — amber front marker and red rear marker lamps both included, so you stock both positions with a single purchase order • Dramatically lower current draw versus incandescent equivalents, reducing alternator load across your fleet and extending electrical component life • Sealed, weatherproof housing engineered to survive highway spray, pressure-wash cycles, road salt exposure, and sub-zero winter temperatures without fogging or moisture intrusion • 10-unit bulk pack designed to fully outfit a 48-foot trailer or maintain a working spare inventory across a commercial fleet without repeated small orders • True plug-and-play installation with standard 12V DC truck and trailer wiring — no ballast, no relay, no load resistor required on most applications Technical Specifications • Quantity: 10 lamps per kit (mix of amber and red units) • Operating Voltage: 12V DC (compatible with standard North American commercial truck and trailer electrical systems) • Light Source: High-intensity LED array • Colors Available: Amber (SAE J592 front/side) and Red (SAE J592 rear) • Mount Style: Oval, compatible with standard OEM trailer and truck body cutouts • IP Rating: Weatherproof sealed housing (suitable for exterior commercial vehicle use) • Operating Temperature: Rated for sub-zero winter conditions through high-heat summer environments • Compliance: DOT/FMCSA-applicable clearance marker light specification Materials and Build Quality The housing on each lamp is constructed from impact-resistant ABS plastic, chosen specifically for its balance of rigidity, UV resistance, and low weight — critical properties for parts that live on the exterior of vehicles traveling at highway speeds through all four seasons. The lens is precision-molded to channel LED output into the wide, uniform dispersion pattern required by DOT clearance marker standards, ensuring your rig is visible from the side at the angles regulators and safety engineers care about most. Each unit is fully sealed at the housing-lens interface, preventing road grime, water, and cleaning chemicals from compromising the electronics inside. The wiring pigtail is insulated with abrasion-resistant jacketing rated for the vibration and flex cycles typical of long-haul commercial operation. Unlike cheap imported lamps that yellow and cloud within a season, the lens material is formulated to resist UV degradation so clarity and light output are maintained over years of continuous outdoor exposure. Installation Guide Installing these LED side marker lights is a straightforward process that most owner-operators and fleet maintenance technicians can complete without specialized tools. Begin by parking the vehicle on a level surface and switching off all electrical systems. Locate the existing clearance marker lamp on your truck body or trailer sidewall — you will typically find a single screw or a snap-fit retaining ring holding the old lamp in place. Remove the fastener, pull the old lamp housing away from the mounting surface, and unplug the wiring connector. Inspect the cutout opening and confirm it matches the oval footprint of the new LED unit. Plug the new LED lamp's pigtail connector directly into the existing vehicle harness — the connector polarity is standard for North American 12V systems, so no rewiring is required on most modern trucks and trailers. Seat the new housing into the cutout, reinstall the retaining screw or press-fit until the housing snaps flush, and confirm there are no gaps where moisture could enter behind the lamp. Power up the system and verify the lamp illuminates correctly. Repeat for each position. A full 10-lamp installation on a 48-foot trailer can typically be completed in under two hours with basic hand tools. What's in the Box • 10x LED clearance side marker lamps (combination of amber and red units) • Pre-attached wiring pigtail on each lamp for direct plug-in installation • Mounting hardware included (confirm quantity on packing slip) Why Shop With Us We source and curate commercial vehicle lighting with working fleets in mind — not showroom builds. Every product in our catalog is selected because it meets the durability, compliance, and value standards that owner-operators and fleet managers actually require when a truck needs to roll. We offer fast domestic shipping, transparent product specs, and a no-nonsense returns process so your downtime stays minimal. When you're managing multiple units and need reliable replacement inventory on the shelf, buying from a supplier who understands the commercial vehicle world makes a measurable difference to your uptime and your bottom line. Order your 10-pack of LED clearance side marker lights today and keep every unit in your fleet DOT-legal, fully visible, and ready for the road. With amber and red positions covered in a single kit at a bulk-friendly price, there's no reason to let a burned-out incandescent become a roadside inspection violation.