Tail Light Assembly Compatible With 2003-2006 Chevy Silverado 1500 1500 HD 2500 2500 HD 3500, 2007-2007 Chevy Classic, 2PCS Driver & Passenger Side LED Taillight Brake Lamps With Bulbs, Black

Stop driving with cracked, faded, or legally non-compliant tail lights. The Vevor black LED tail light assembly pair brings your 2003-2006 Chevy Silverado or 2007 Chevy Classic back to road-legal condition with brighter, faster-reacting LED technology and a sharp black housing that looks right at home on both stock work trucks and custom builds. Compatibility This complete set is engineered specifically for the GMT800-generation Chevrolet Silverado platform — covering model years 2003, 2004, 2005, and 2006 across the full range of cab and bed configurations. Supported trims include the Silverado 1500, 1500 HD, 2500, 2500 HD, and the heavy-duty 3500. Coverage also extends to the 2007 Chevy Classic, which was the final carryover of the GMT800 body sold alongside the next-generation GMT900 for one additional model year. One kit replaces both driver-side and passenger-side tail lamps so you never deal with mismatched lens color or brightness between the two sides. Always cross-reference your OEM part number or build date sticker to confirm your specific configuration before ordering. Key Benefits • Faster Brake Response – Integrated LED brake circuits illuminate up to 200ms quicker than standard incandescent bulbs, giving the driver behind you a critical extra fraction of a second to react and stop. • True Plug-and-Play Installation – Precision-molded housing aligns with factory bolt holes and the wiring connector clicks directly into your truck's OEM harness — zero cutting, zero splicing, zero trips to a shop. • Complete Pair in One Purchase – Both the driver-side and passenger-side assemblies are included, eliminating the frustration of sourcing each side from different suppliers or waiting on a second shipment. • Black Housing Finish – The sleek black housing complements blacked-out builds, aftermarket bumpers, and tonneau covers without the yellowing or hazing that plagues aged clear or smoked OEM lenses. • Bulbs Pre-Packaged – Every required replacement bulb is already in the box, so there's no last-minute hardware-store run before your install. • Road-Legal Brightness – LED output meets SAE J586 brake lamp and SAE J585 tail lamp standards, keeping your Silverado compliant for highway and commercial use. Technical Specifications • Fitment: 2003-2006 Chevy Silverado 1500, 1500 HD, 2500, 2500 HD, 3500; 2007 Chevy Classic • Quantity: 2 pieces — 1 driver side (LH) + 1 passenger side (RH) • Light Source: Integrated LED brake/tail circuit • Housing Color: Black (non-chrome) • Lens Tint: Clear/red per OEM position layout • Connector Type: Direct OEM plug-in, no wiring modification • Bulbs: Included in package • Operating Voltage: 12V DC (standard automotive) Materials and Build Quality The Vevor tail light housing is constructed from high-impact ABS plastic, chosen for its proven resistance to vibration, road debris impact, and temperature cycling — all real-world punishment that a full-size pickup absorbs on a daily basis. The lens material uses UV-stabilized polycarbonate to resist yellowing and hazing over years of sun exposure, which is one of the primary failure modes on aging OEM Silverado lenses. Internal sealing gaskets are pre-installed on both assemblies to block moisture intrusion that causes corrosion on bulb sockets and shorts in the LED circuit board. The LED circuit board itself is mounted on a thermally managed substrate that dissipates heat away from the diodes, extending service life well beyond that of incandescent alternatives. The black housing finish is applied at the factory under controlled conditions so you won't see the bubbling or peeling that can occur with aftermarket painted assemblies. Every unit is bench-tested for electrical continuity and lens seal integrity before leaving the facility. Installation Guide Installing these assemblies on your Silverado is a straightforward process that most owners complete in under 30 minutes per side with basic hand tools. Start by opening the tailgate to expose the retaining fasteners on the inboard edge of each tail light housing. Remove the two or three Phillips or Torx screws securing the assembly to the truck bed. Carefully pull the housing straight rearward — it is held by a secondary clip in addition to the screws — and unplug the OEM wiring harness connector by pressing the release tab and pulling firmly. Set the old assembly aside. Before installing the new Vevor unit, verify that the included bulbs match what your truck requires for the turn signal and backup lamp sockets; install them into the appropriate sockets in the new assembly. Align the new housing over the mounting studs, press it firmly inward until the retaining clip seats with a click, then reinstall the factory screws and snug them down — do not overtighten ABS plastic mounting points. Reconnect the OEM harness connector until it clicks. Close the tailgate, then have an assistant verify brake light, turn signal, and running light function before driving. Repeat the identical process on the opposite side. What's in the Box • 1x Driver-side (LH) LED tail light assembly with black housing • 1x Passenger-side (RH) LED tail light assembly with black housing • Replacement bulbs (all required positions included) • OEM-matched harness connectors pre-installed Why Shop With Us We stock a curated catalog of direct-fit lighting upgrades for working pickups and commercial vehicles — parts that are sourced, described, and supported by people who understand the US automotive market. Every listing is vetted for accurate fitment data so you're not gambling on a vague compatibility chart. We offer transparent pricing with no hidden fees, fast domestic shipping, and a responsive customer service team that can help you confirm fitment or walk through installation questions before and after your purchase. Ready to restore reliable, bright brake lighting to your Silverado? Add this Vevor black LED tail light assembly pair to your cart now and get your GMT800 truck back on the road looking sharp and running safely.