Solar Powered Wall Lights Outdoor 100LED Beads Motion Sensor Lamp IP65 Waterproof 3 Modes Sensor Light

Stop leaving your fleet assets, loading docks, and garage entries in the dark. This 100-LED solar-powered outdoor wall light delivers broad, bright perimeter illumination with zero wiring, zero electricity costs, and zero contractor fees — a genuine drop-in security upgrade for commercial operators and homeowners alike. This solar wall light is built for universal outdoor use and fits virtually any vertical exterior surface. Whether you manage a Freightliner Cascadia lot that needs reliable perimeter coverage after dark, run a Sprinter van service bay that demands hands-free activation when technicians approach, operate a Ford F-150 or Chevy Silverado fleet parking area where after-hours visibility matters for safety and insurance, or simply want your residential driveway and backyard secured, this fixture installs on any masonry, wood, metal, or composite wall in under 15 minutes. No conduit, no electrician, no permit. One mounting location with strong daily sun exposure is all it needs. • Zero Energy Cost: Powered entirely by the integrated solar panel that charges its built-in rechargeable battery throughout the day, this light costs nothing to operate — important for fleet operators watching overhead on dozens of properties. • Instant Motion Activation: The PIR (Passive Infrared) sensor detects movement within approximately 10–16 feet across a 120-degree wide sensing arc, instantly flooding the zone with full-brightness output. Trespassers are deterred, and your team is alerted to activity around vehicles and entry points. • Three Versatile Lighting Modes: Mode 1 keeps the fixture at low ambient brightness all night, then bursts to full power on motion. Mode 2 activates full brightness only on motion detection, maximizing battery reserve for single-trigger situations. Mode 3 delivers continuous full brightness for constant coverage in high-priority zones. • IP65 Weatherproof Construction: Dust-tight and water-jet resistant, this light handles rain, sleet, humidity, and dusty fleet environments without compromise — rated for year-round outdoor service across all US climate zones. • Wide-Area Coverage: One hundred high-efficiency LED beads spread light across a large coverage footprint, making this fixture effective for wide driveways, bay entrances, cargo areas, and equipment storage perimeters. • Fast, No-Tool Setup: Standard mounting hardware is included. Position, anchor, angle toward the sun, and the light operates automatically from the first dusk onward. • LED Count: 100 high-efficiency LED beads • Waterproof Rating: IP65 (dust-tight, water jet resistant per IEC 60529) • Lighting Modes: 3 selectable — ambient + motion burst / motion-only full brightness / continuous full brightness • Power Source: Integrated solar panel with built-in rechargeable battery (charges via sunlight) • Motion Sensor: PIR (Passive Infrared), approximately 10–16 ft detection range • Sensing Angle: Up to 120 degrees horizontal arc • Mounting: Wall-mount, universal vertical surface, hardware included • Operating Conditions: Full outdoor, rated for rain, dust, humidity (IP65) The housing is constructed from impact-resistant ABS plastic with a UV-stabilized matte black finish that resists fading, yellowing, and surface degradation even after years of direct sun exposure. ABS is the same class of engineering-grade polymer used throughout the commercial lighting industry for good reason: it is lightweight enough for easy single-person installation, rigid enough to hold alignment after mounting, and chemically resistant to road salt spray, diesel exhaust particulates, and the grime-heavy air common around active truck yards and warehouse docks. The LED array itself sits behind a tough polycarbonate lens that protects the emitters from impact and provides the light-diffusion characteristics needed for broad, even coverage rather than a tight hotspot. The solar panel is mounted at a fixed optimized angle on the top of the unit to capture maximum daily irradiance across a wide range of US latitudes, from Southern California logistics hubs to upper Midwest fleet yards. All exposed seams are sealed to IP65 specification, ensuring no moisture intrusion reaches the battery or circuitry even during heavy driving rain or direct hose-down cleaning of surrounding surfaces. Installation is straightforward and requires only a drill, appropriate anchors for your wall material, and a screwdriver. Step 1: Unbox the unit and confirm all mounting hardware is present. Step 2: Choose your mounting location — aim for a wall height of 8 to 12 feet for optimal motion detection and coverage spread, and confirm the top solar panel will receive unobstructed sunlight for the majority of the day. Step 3: Mark and drill your anchor holes using the included template or by holding the bracket against the wall. Step 4: Insert wall anchors appropriate for your surface (concrete, wood stud, or metal stud — anchors for masonry are recommended for exterior commercial walls). Step 5: Secure the mounting bracket with the provided screws. Step 6: Attach the light fixture to the bracket and tighten the locking mechanism. Step 7: Select your preferred lighting mode using the mode selector on the unit. Step 8: Allow the battery to charge for one full day in direct sunlight before the first operational night. The fixture will begin activating automatically at dusk based on its integrated daylight sensor. No wiring, no junction boxes, no inspection required. • 1x 100-LED Solar Outdoor Wall Light (solar panel integrated) • 1x Mounting Bracket • 1x Hardware Pack (screws and wall anchors) • 1x User Instruction Sheet At Expedite, we source commercial-grade accessories tested for the demands of real fleet environments, not just residential curb appeal. Every product in our catalog is selected with the working truck operator, van fleet manager, and serious property owner in mind. We ship fast, price competitively, and back our product selection with responsive US-based customer support. When you need lighting, security, or hauling accessories that actually hold up on the job, Expedite is where experienced operators shop first. Ready to eliminate dark spots around your trucks, bays, and property perimeter? Add this 100-LED solar motion sensor wall light to your cart today. At this price point, it pays for itself within the first month of eliminated electrical draw — and it keeps working for years without a single maintenance call.