20 Ton Pneumatic Air Hydraulic Bottle Jack With Manual Hand Heavy Duty Auto Truck Travel Trailer Repair Lift

When you need to lift a fully loaded semi, a diesel dually, a box truck, or a travel trailer without breaking your back or your schedule, the CYDD 20-Ton Pneumatic Air Hydraulic Bottle Jack is the tool professionals trust. Combining air-powered speed with manual hand-pump precision, this jack delivers 40,000 lbs of controlled lifting force in any commercial garage, roadside emergency, or fleet maintenance bay. This 20-ton bottle jack is universally compatible with the widest range of commercial and consumer vehicles on the road today. It works with heavy-duty pickups including the Ford F-250, F-350, RAM 2500, RAM 3500, Chevy Silverado HD, and GMC Sierra HD. It handles Class 4–8 commercial trucks including Freightliner Cascadia, Kenworth T680, Peterbilt 579, International LT, and Mack Anthem. It also supports box trucks, sprinter-based cargo vans, travel trailers, fifth-wheel RVs, farm equipment, and construction machinery. If the vehicle weighs up to 20 tons and needs to come off the ground safely, this jack is engineered for the job. No adapter kit required — the wide-base saddle seats securely under standard frame rails and axle housings across virtually every make and model. • Dual-mode operation: connect to a shop air compressor for rapid, effortless lifting or switch instantly to the manual hand pump for precision control or emergency off-grid use — no power outlet needed • 20-ton (40,000 lb) rated capacity handles the heaviest pickup trucks, semi cabs, loaded trailers, and commercial fleet vehicles without strain • Built-in safety overload valve automatically stops lifting if the load exceeds rated capacity, protecting both the technician and the vehicle • Rapid air-powered lift stroke dramatically reduces time on the job compared to purely manual bottle jacks — critical in high-volume fleet shops • Hardened steel construction resists deformation, corrosion, and fatigue even under repeated daily use in demanding shop environments • Compact bottle-jack form factor fits beneath low-clearance vehicles and stores easily in a service truck, toolbox, or alongside spare equipment • Rated Capacity: 20 tons (40,000 lbs) • Operation Modes: Pneumatic air-powered + manual hand pump (dual) • Recommended Air Pressure: 90–150 PSI shop air • Minimum Height (collapsed): approximately 9.1 in (231 mm) • Maximum Lift Height: approximately 18.1 in (460 mm) • Lift Stroke: approximately 9.0 in (229 mm) • Base Footprint: approximately 6.5 in × 6.5 in for stable ground contact • Unit Weight: approximately 44 lbs (20 kg) • Safety Feature: built-in overload protection valve • Air Inlet: standard 1/4-in NPT quick-connect fitting The CYDD 20-ton bottle jack is constructed from high-grade structural steel throughout — from the thick-walled cylinder barrel to the heavy baseplate and precision-machined ram piston. The hydraulic cylinder is honed to tight tolerances to minimize internal leakage and maintain consistent pressure throughout the lift stroke. All seals are high-durometer rubber compounds rated for petroleum-based hydraulic fluid, resisting swelling, cracking, and fluid bypass even after thousands of cycles. The exterior finish is a corrosion-resistant enamel coating that holds up to oil, grit, concrete dust, and road salt — the everyday abuse of a working commercial shop. The saddle is machined steel with a recessed contact face that grips axle housings and frame rails without slipping. The base plate is wide and flat, engineered to distribute 40,000 lbs of load across a broad footprint to prevent sinking on asphalt or soft concrete. Every weld joint is inspected and load-tested at the factory to ensure the jack performs exactly at — and safely above — its rated capacity before it ships. Installing and using the CYDD 20-ton air hydraulic bottle jack is straightforward, but always follow safe jack stand practices. Step 1: Park the vehicle on a firm, level surface and engage the parking brake or chock the wheels. Step 2: Identify a solid lift point — reinforced frame rail, axle housing, or manufacturer-specified jack point — and clear away any debris. Step 3: Close the release valve on the jack by turning it clockwise until snug. Step 4: Connect your shop air supply line to the 1/4-in NPT air inlet fitting; confirm the compressor is delivering 90–150 PSI. Step 5: Slide the jack beneath the vehicle and position the saddle squarely under the lift point. Step 6: Activate the air trigger or depress the manual pump handle to begin raising the vehicle. The ram will extend smoothly. Step 7: Once at the desired height, immediately place rated jack stands beneath the vehicle — never work under a vehicle supported only by a jack. Step 8: To lower, slowly crack the release valve counterclockwise in small increments to descend in a controlled manner. Step 9: After use, fully retract the ram, disconnect the air line, and store the jack upright in a clean, dry location. Check the hydraulic fluid level periodically and refill with standard hydraulic jack oil as needed to maintain peak performance. • 1× CYDD 20-ton pneumatic air hydraulic bottle jack (assembled) • 1× Manual hand pump handle • 1× Air inlet quick-connect fitting (1/4-in NPT, pre-installed) • 1× Product instruction sheet At Expedite Parts, we stock professional-grade tools for the people who actually use them — fleet mechanics, owner-operators, mobile service technicians, and serious DIY truck owners. Every product we carry is sourced from verified suppliers and ships with full tracking so you always know where your order is. Our 30-day defect warranty means if this jack arrives with a manufacturing issue, we make it right — no runaround, no hassle. We process orders fast because we know downtime costs money, and we answer questions from real automotive specialists who understand your vehicle and your work. Stop wrestling with undersized floor jacks that can't handle your truck or trailer. Order the CYDD 20-Ton Pneumatic Air Hydraulic Bottle Jack today, get it delivered in approximately 10 days with full tracking, and put a professional-grade lifting solution in your shop or service truck that will perform every single time you need it. Add to cart now — your next job is waiting.