2x RED OLED TUBE LED License Plate Light Lamp For 2005-15 Tacoma Tundra

Stand out from every angle with these red OLED tube LED license plate lights built specifically for the 2005-2015 Toyota Tacoma and Toyota Tundra. This 2-pack drops straight into your factory mounting points, delivering a bold custom look without a single wire cut or bracket fab session. COMPATIBILITY This set is engineered for model years 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, and 2015 Toyota Tacoma and Toyota Tundra. The Tacoma mid-size pickup and the Tundra full-size pickup share compatible license plate lamp mounting geometry across this entire generation span, making this a versatile solution whether you're running a base Access Cab Tacoma or a fully loaded Tundra CrewMax. As always, verify your specific cab configuration, trim level, and regional market variant before ordering, since limited special editions occasionally deviate from the standard OEM mounting layout. When in doubt, cross-reference with your owner's manual or consult a vehicle fitment guide. KEY BENEFITS • Bold Red OLED Tube Glow — The OLED tube design produces a smooth, uniform red illumination across the entire lamp face, eliminating the hot spots and uneven output common with single-point LED setups. At night your Tacoma or Tundra commands attention from behind. • Zero-Modification Install — This set plugs directly into your existing factory harness connectors, matching the OEM mounting points on 2005-2015 Toyota trucks. No drilling, cutting, splicing, or custom brackets required, making this an ideal upgrade for any skill level. • Long-Lasting LED Efficiency — LED technology outlasts factory incandescent bulbs by tens of thousands of hours under normal use, meaning you install these once and forget about them. Low power draw also reduces unnecessary strain on your truck's electrical system. • 12V DC Ready — Designed to operate at standard 12V DC automotive voltage, so these lights are fully compatible with your factory charging and battery system right out of the box. • Complete 2-Piece Set — Includes both left and right units so you're replacing the entire license plate lighting system in a single purchase, ensuring a matched appearance on both sides. • Custom Aesthetic Without Custom Cost — The red OLED tube styling gives your build a distinctly aftermarket, show-ready look at a price point that leaves budget for your next mod. TECHNICAL SPECIFICATIONS • Light Technology: OLED Tube LED • Illumination Color: Red • Quantity: 2 pieces (1x left, 1x right) • Operating Voltage: 12V DC • Power Consumption: Low-draw LED (substantially lower wattage than OEM incandescent equivalents) • Compatibility: 2005-2015 Toyota Tacoma, 2005-2015 Toyota Tundra • Connector Type: Direct plug-in to factory harness (no wiring modification) • Operating Environment: Designed for exterior automotive use, rated for standard temperature and vibration conditions typical of truck applications MATERIALS AND BUILD QUALITY These license plate lamps are constructed with a durable outer housing designed to withstand the vibration, temperature swings, and road debris exposure that come with driving a pickup truck day in and day out. The OLED tube element is sealed within the housing to protect against moisture intrusion and dust, both of which can degrade lighting performance over time. The lens and body materials are selected to resist UV fading and discoloration, keeping the red appearance crisp through seasons of sun exposure. The electrical connectors are molded to maintain a secure, corrosion-resistant contact with your factory harness, reducing the risk of intermittent operation or flickering that affects cheaper aftermarket lighting. This level of attention to component selection is what separates a reliable long-term lighting upgrade from a part that fails after one winter. INSTALLATION GUIDE Installing these OLED tube LED license plate lights on your 2005-2015 Toyota Tacoma or Tundra is a straightforward job that most owners complete in under 30 minutes using basic hand tools. Follow these steps for a clean, professional result: 1. Gather your tools — you'll typically need a small Phillips-head screwdriver or a plastic trim pry tool, depending on your specific year and trim. 2. Open your tailgate fully to gain clear access to the rear license plate lamp housing area. 3. Locate the factory license plate light assemblies on either side of the license plate recess. On most 2005-2015 Tacoma and Tundra models, these are secured with one or two small screws. 4. Remove the retaining screws and gently pull the OEM lamp housing away from the body panel. 5. Disconnect the factory wiring harness plug from the back of the old lamp assembly. 6. Connect the factory harness plug into the new red OLED tube LED lamp. The plug is designed to mate directly — if it resists, do not force it; confirm you have the correct connector orientation. 7. Seat the new lamp housing into the mounting recess and reinstall the retaining screws finger-tight, then snug with your screwdriver. 8. Repeat for the opposite side. 9. With the tailgate open, turn on your headlights or parking lights to verify both OLED lamps illuminate with a consistent red glow before closing up. If at any point the lamps do not illuminate, check the harness connection and inspect your truck's fuse box for any blown fuses related to the license plate lighting circuit. WHAT'S IN THE BOX • 2x Red OLED Tube LED License Plate Light Lamps (left and right) • Direct-fit factory-style harness connectors pre-attached WHY SHOP WITH US We specialize in hard-to-find exterior lighting upgrades for American pickup trucks, cargo vans, and commercial vehicles. Every product in our catalog is selected for fitment accuracy, build quality, and real-world durability on US roads. We process orders quickly, ship from US-friendly distribution points, and back every purchase with responsive customer support. Whether you're upgrading one truck or outfitting a fleet, we make the process fast and straightforward. ORDER TODAY Give your 2005-2015 Toyota Tacoma or Tundra a sharp, distinctive rear appearance with these red OLED tube LED license plate lights. Add to cart now and receive your direct-fit 2-pack ready to install this weekend.