2015-2020 Ford F-150 passenger side heated mirror replacement JL3Z17682CA front view−15%

Passenger Side View Mirror Fit For Ford F-150 5.0L 2015-2020 JL3Z17682CA Heated

(128 reseñas)|SKU: SE-CJDR-CJQC2936943
$167.31$197.43Ahorra $30.12
Agotado temporalmente
🚚 ENVÍO GRATIS✨ NUEVO
  • Compatibility
  • Key Benefits
  • Plug-and-play wiring connector matches the factory Ford harness pin-for-pin, eliminating any splicing, tapping, or adapter kits.
  • UV-stabilized ABS plastic housing resists sun fade, road vibration, and minor impacts far better than cheap resin knock-offs.
  • Factory-matched glass curvature delivers the same wide passenger-side field of view Ford engineers specified, reducing blind-spot risk.
Cantidad:
1
Envío Gratis
En pedidos $199+
Devoluciones
30 días garantía
Garantía
30 días de garantía contra defectos de fábrica.
Soporte 24/7
Asistencia siempre

A cracked or failed heated mirror on your 2015-2020 Ford F-150 isn't just an annoyance — in cold-weather driving conditions, it's a genuine safety hazard. This direct-fit passenger side heated mirror restores factory visibility and full heating function so you can get back on the road with confidence, no body shop required. Compatibility This heated passenger side view mirror is engineered as a direct OE replacement for Ford part number JL3Z17682CA. It is designed specifically for 2015, 2016, 2017, 2018, 2019, and 2020 Ford F-150 trucks equipped with the 5.0L V8 engine — 13th-generation F-150 platforms. The mounting tab geometry, wiring harness connector pinout, and glass profile are all matched to the factory right-side (passenger) door mirror specification. Before completing your order, we strongly recommend confirming your existing OE part number on the mirror housing or in your owner's manual to guarantee a precise fit. Mixing up driver-side and passenger-side mirrors is the single most common ordering mistake — this unit is for the RIGHT side only. Key Benefits • Restores full heated mirror functionality — ice, frost, and condensation clear in minutes, keeping your blind spots visible during harsh winter commutes and highway driving. • True direct-fit OE replacement — zero modifications to your door panel, wiring harness, mounting holes, or mirror bracket. Fits exactly like the part that came off the assembly line. • Plug-and-play wiring connector matches the factory Ford harness pin-for-pin, eliminating any splicing, tapping, or adapter kits. • UV-stabilized ABS plastic housing resists sun fade, road vibration, and minor impacts far better than cheap resin knock-offs. • Factory-matched glass curvature delivers the same wide passenger-side field of view Ford engineers specified, reducing blind-spot risk. • Priced well below dealer parts counter pricing — save on the part without sacrificing fitment accuracy. Technical Specs • OE Part Number: JL3Z17682CA • Side: Passenger / Right • Vehicle Fitment: 2015-2020 Ford F-150 with 5.0L V8 • Generation: 13th Gen F-150 • Heating Element: Integrated electric defrost grid, factory voltage (12V system compatible) • Housing Material: UV-stabilized ABS plastic • Glass Type: Convex, heated • Wiring Connector: Factory Ford plug-and-play, no splicing required • Mounting: Direct bolt-on using OE tab locations — no drilling or adapter brackets • Operating Temperature Range: Suitable for North American winter conditions Materials & Build Quality The housing on this mirror is molded from UV-stabilized ABS (Acrylonitrile Butadiene Styrene) plastic — the same class of material Ford and major Tier-1 suppliers specify for exterior mirror housings. ABS strikes the right balance between rigidity and impact resistance: it won't shatter on contact the way brittle polystyrene alternatives do, yet it holds tight dimensional tolerances so the mounting tabs engage your door bracket without play or rattle. The UV stabilizer package built into the resin formula protects the housing pigment from chalking and fading under prolonged sun exposure, which matters on a truck that spends time in open parking lots, job sites, or highway miles. The glass itself is precision-cut to match the factory convex radius, and the embedded heating grid is bonded to the glass using a process that resists delamination over repeated heat cycles — a common failure point on bargain-bin mirror replacements. Every component in the assembly is tested against factory dimensional drawings before leaving the facility. Installation Guide Installing this mirror is a legitimate DIY job for anyone comfortable with basic hand tools. Budget approximately 30 to 45 minutes. Start by lowering the passenger-side window fully so you have clear access to the door panel. Using a trim pry tool, carefully pop the interior door panel away from the door frame, working from the bottom edge upward to release the plastic retaining clips — do not yank, as broken clips are the most common self-inflicted damage during this job. Locate the triangular plastic sail cover at the front corner of the window opening and remove it; this reveals the mirror's three mounting bolts (typically 10mm). Unplug the two-piece electrical connector from the mirror wiring harness — press the release tab and pull straight back. Remove the three mounting bolts and carefully lift the old mirror away from the door. Position the new mirror against the door, align the mounting tabs with the bolt holes, and thread the bolts in finger-tight. Plug the factory wiring connector into the new mirror until you hear it click. Torque the three mounting bolts to approximately 7 ft-lbs (do not overtighten ABS-backed tabs). Reinstall the sail cover, reseat the door panel clips, and raise the window. Test the heating function by turning on your rear defrost — the mirror heater activates on the same circuit on most F-150 trim levels. Verify mirror adjustment via the in-cabin power mirror switch. What's in the Box • 1x Passenger side heated door mirror assembly (right side, pre-wired) • Factory-style mounting hardware (bolts included where applicable) • Product fitment reference card Why Shop With Us We source parts built to direct OE specifications so your 2015-2020 Ford F-150 gets hardware that fits correctly the first time — no return shipping headaches, no back-and-forth with a dealer parts counter. Our product listings are researched against factory part numbers so the compatibility information you read here is accurate, not copy-pasted filler. We stand behind every order with responsive US-based customer support. Whether you're a fleet manager replacing mirrors across multiple work trucks or a weekend warrior fixing last winter's parking-lot damage, we make the process straightforward from cart to install. Order your 2015-2020 Ford F-150 passenger side heated mirror today. With direct OE fitment at a fraction of dealer pricing and plug-and-play installation you can complete in under an hour, there is no reason to let a broken mirror compromise your safety or your truck's resale value. Add to cart now and restore factory-spec visibility before the next cold snap hits.

Marca:jiujiu2
SKU proveedor:CJQC2936943
Lead time:10 días
Peso:3150.0 kg

Made with Emergent