Front & Rear Fender Flares Compatible With 2018-2026 Wrangler JL & JLU Unlimited Sahara Fit Original Low Fender ,Not Fit 4xe

If you've lifted your Jeep Wrangler JL or JLU Unlimited and swapped in a set of wider all-terrain or mud-terrain tires, you already know the problem: your stock flares don't cover the tread, and depending on your state, that's a legal issue as much as a cosmetic one. These matte black ABS fender flares close that gap instantly — no body shop, no drilling, no weekend lost in the driveway. Compatibility These fender flares are precision-engineered exclusively for the 2018-2026 Jeep Wrangler JL (2-door) and JLU Unlimited (4-door). They are designed to work with the factory-installed low fender trim found on Sahara and equivalent trim levels that share the same lower body panel geometry. Both the 2-door Sport and the 4-door Unlimited body styles are fully supported with this kit. Important fitment note: this set does NOT fit the Jeep Wrangler 4xe plug-in hybrid model. The 4xe uses a different lower body panel and fender mounting structure that is incompatible with this design. Always confirm your exact trim level — specifically whether you have the original low fender profile — before placing your order. If you are unsure, check your door jamb sticker or consult your dealer's build sheet. Key Benefits • Bolt-on installation using factory OEM snap clips — zero cutting, zero drilling, and no permanent modifications to your Wrangler's body panels • Wider coverage profile legally and cleanly covers the additional tire width created by aftermarket all-terrain or mud-terrain upgrades, keeping you compliant in most US states • Full paint protection shields your factory finish from gravel, sand, mud, and high-speed debris that larger tires kick up during both highway driving and trail use • Complete set of four — 2 front flares (driver and passenger) plus 2 rear flares — delivering fully matched, symmetrical coverage around the entire vehicle • UV-stabilized matte black finish is engineered to resist fading, chalking, and discoloration even after extended exposure to sun, road salt, and off-road environments • Lightweight construction at approximately 3.14 lbs per assembly adds virtually no measurable weight to your Wrangler's body and does not affect handling or payload Technical Specifications • Vehicle Fitment: 2018-2026 Jeep Wrangler JL (2-door) and JLU Unlimited (4-door) • Trim Compatibility: Factory low fender trim — Sahara and equivalent; excludes 4xe hybrid • Material: High-impact UV-stabilized ABS thermoplastic • Finish: Textured matte black — no painting required out of the box • Pieces Included: 4 total — 2 front (driver + passenger), 2 rear (driver + passenger) • Weight per Assembly: Approximately 3.14 lbs • Mounting Method: Direct OEM snap-clip bolt-on; no drilling or cutting required • Hardware: Compatible with factory OEM mounting clips and fastener locations Materials and Build Quality These fender flares are molded from high-impact ABS thermoplastic, the same material class used by OEM manufacturers for exterior trim components. ABS offers an excellent balance of rigidity and flex tolerance, which matters on a Wrangler that sees actual trail use — rigid enough to hold its shape at highway speeds while flexible enough to absorb minor impacts from rocks and brush without cracking. The surface is finished in a textured matte black that mimics factory OEM exterior trim aesthetics. More importantly, the UV stabilizers blended into the ABS compound prevent the oxidation and surface chalking that degrades cheap, unprotected plastics after a single season in the sun. Whether you're wheeling in the Arizona desert, running salt-covered Michigan highways in winter, or parking in a Florida lot all summer, this finish is built to maintain its appearance over the long term without requiring paint, wrap, or additional treatment. Installation Guide Installing these fender flares is a straightforward process that most Wrangler owners can complete in under two hours with basic hand tools and no professional mechanical experience required. Start by parking on a flat, level surface and allowing the vehicle to cool if recently driven. Begin with the front driver-side flare: locate the existing OEM fender trim and gently remove it by releasing the factory snap clips — a trim removal tool or flathead screwdriver wrapped in tape will protect the paint. Clean the mounting surface with isopropyl alcohol and allow it to dry fully. Align the new flare with the factory mounting holes and press each snap clip firmly into position until you hear or feel it seat. Repeat the process for the front passenger side, then move to the rear. For the rear flares, the process is identical — release existing trim, clean the surface, align the new flare, and press the clips home. Once all four flares are installed, walk around the vehicle and apply firm hand pressure along each flare edge to confirm every clip is fully engaged. No torque specs or power tools are required. The entire installation requires zero drilling, cutting, or modification to your Wrangler's body panels, preserving your factory warranty coverage on body components. What's in the Box • 2x Front Fender Flares (driver-side and passenger-side) • 2x Rear Fender Flares (driver-side and passenger-side) • OEM-compatible mounting hardware and snap clips • Installation reference guide Why Shop With Us We specialize in fitment-specific exterior upgrades for American trucks, SUVs, and commercial vehicles. Every product in our catalog is vetted for accurate year-make-model compatibility before it goes live. We know Wrangler owners don't have time for returns caused by bad fitment data, so we invest in getting the compatibility details right the first time. Our team is available to answer fitment questions before you buy, and our returns process is straightforward if anything isn't right. Fast domestic shipping means your flares arrive quickly so you can get back on the trail. Ready to give your 2018-2026 Jeep Wrangler JL or JLU Unlimited the aggressive, trail-legal stance it deserves? Add this complete set of four matte black ABS fender flares to your cart now and transform your Wrangler's look in an afternoon — no drilling required.