2PCS Front Wheel Bearing & Hub Assembly Fit For 2020 Cadillac Escalade Base Platinum Premium Luxury Sport Utility Chevy Suburban LS LT OEM 515160, Wheel Bearing Hub Assembly Set With ABS Sensor

That low grinding hum coming from your front wheels isn't going away on its own — and ignoring it is a fast track to compromised steering, failed ABS response, and a repair bill that balloons by the week. This 2-piece front wheel bearing and hub assembly set is built to eliminate the noise, restore confident handling, and get your 2020 Cadillac Escalade or Chevrolet Suburban back to factory-safe operation — with the integrated ABS sensor already built in. Compatibility This listing covers two (2) front wheel bearing hub assemblies that directly replace OEM part number 515160. Confirmed fitment includes the 2020 Cadillac Escalade across all available trim levels — Base, Platinum, Premium Luxury, and Sport Utility — as well as the 2020 Chevrolet Suburban in both LS and LT configurations. Both platforms share an identical front suspension architecture and hub mounting interface, making this a true cross-platform drop-in replacement requiring zero modification. These assemblies are designed exclusively for front axle positions — left and right — and must not be installed at rear positions. Before completing your purchase, verify your trim level and confirm your vehicle uses OEM reference 515160. If you are unsure, use your VIN to cross-check fitment with your dealer parts catalog or a trusted automotive fitment database. Key Benefits • Replace both sides simultaneously to eliminate uneven wear, mismatched rolling resistance, and inconsistent ABS response — one kit handles the entire front axle. • Integrated ABS wheel speed sensor means no sensor transfer, no hunting for a separate part, and no risk of damaging a fragile OEM sensor during removal. • Pre-greased sealed bearing cartridge blocks road grit, moisture, and debris from day one, extending service life well beyond open or unsealed alternatives. • Direct OEM 515160 cross-reference ensures bolt-on fitment — no drilling, no adapters, no guesswork on hole patterns or stud spacing. • Balanced pair installation maintains equal steering geometry and braking force distribution across both front corners of your vehicle. • Engineered for the weight and torque demands of full-size GM SUVs — built to handle the load ratings and suspension forces specific to the Escalade and Suburban platform. Technical Specifications • OEM Cross-Reference: 515160 • Position: Front left and front right (both included) • Quantity: 2 pieces per set • ABS Sensor: Integrated, pre-wired harness connector included • Bearing Type: Pre-greased sealed cartridge unit bearing • Mounting: Bolt-on direct replacement, no modification required • Stud Count: Matches OEM stud pattern for 2020 Escalade and Suburban • Vehicle Application: 2020 Cadillac Escalade (Base, Platinum, Premium Luxury, Sport Utility); 2020 Chevrolet Suburban (LS, LT) Materials & Build Quality These hub assemblies are constructed from high-grade steel engineered to meet the structural and fatigue demands of full-size GM SUV platforms. The outer hub flange is precision-machined to maintain tight tolerances on stud placement and rotor mating surfaces, ensuring rotor runout stays within spec after installation. The sealed bearing cartridge is packed with high-temperature, water-resistant grease at the factory — eliminating the need for any pre-installation lubrication and ensuring the bearing is protected from the moment it leaves the box. The ABS sensor ring is integrated directly into the bearing assembly and matched to the pulse frequency expected by the Escalade and Suburban's ABS and traction control modules, so you get accurate wheel speed data without calibration. The harness connector is molded to resist moisture intrusion in the exposed underbody environment. Every unit is inspected for dimensional accuracy before shipping to ensure the mounting face, bore diameter, and bolt pattern conform to OEM specifications. Installation Guide Installing these hub assemblies is a straightforward DIY job for anyone comfortable with basic suspension work. Begin by safely lifting the front of the vehicle and securing it on jack stands rated for your SUV's weight — never work under a vehicle supported only by a floor jack. Remove the wheel and tire. Loosen and remove the axle nut (typically a 36mm socket) and slide the CV axle back from the hub spline. Unbolt the brake caliper and bracket, and hang them safely to avoid straining the brake line. Slide the rotor off the hub. Disconnect the ABS sensor harness from the vehicle wiring loom — note the routing for reinstallation. Remove the three or four hub-to-knuckle mounting bolts using the appropriate metric socket. Slide the old hub assembly off the knuckle bore, pulling the axle back as needed to clear the spline. Clean the knuckle bore and mounting face thoroughly to remove rust and debris. Install the new hub assembly by aligning the bolt holes and threading the mounting bolts by hand before torquing to OEM specification (typically 133 ft-lbs — confirm in your service manual). Reconnect and re-route the ABS sensor harness, securing any clips. Reinstall the rotor, caliper bracket, caliper, and axle nut, torquing the axle nut to spec (approximately 177 ft-lbs). Repeat the process on the opposite front wheel. Reinstall both wheels, lower the vehicle, and road test to confirm noise elimination and proper ABS warning light behavior. Repeat installation on the second hub before driving if both sides require replacement. What's in the Box • 2x Front wheel bearing hub assemblies (driver side + passenger side) • 2x Integrated ABS wheel speed sensors (pre-attached) • Pre-greased sealed bearing cartridges (factory-filled, no additional lubrication needed) Why Shop With Us We stock hub assemblies for high-demand GM platforms because we know a failed wheel bearing is not a problem you can schedule around. These units ship quickly, are priced to cover both fronts in a single order — saving you time, a second return trip, and the risk of a mismatched pair — and are backed by a fitment guarantee. Our listings are built around confirmed OEM cross-references, not guesswork, so you can order with confidence that what arrives will bolt straight onto your Escalade or Suburban. Ready to eliminate the grinding and restore safe, balanced handling to your 2020 Cadillac Escalade or Chevrolet Suburban? Add both front hubs to your cart now and get this repair done right — one order, one delivery, one fix.