7.5FT Heavy Duty Aluminum Loading Ramp Set For Pickup Truck Beds, 1500LB Capacity Folding Ramps For ATV, UTV, Motorcycle, Lightweight Portable Truck Ramps With Anti-Slip Surface, 2PCS

Loading your ATV, UTV, or motorcycle onto a pickup truck should take minutes — not muscle, not a second set of hands, and definitely not a trip to the ER. The CYDD 7.5FT Heavy Duty Aluminum Folding Loading Ramp Set gives you a professional-grade, no-compromise solution that handles the grunt work so you can focus on the ride ahead. Compatibility is built into every dimension of these ramps. The 7.5-foot (90-inch) extended length is engineered to work with virtually every full-size and mid-size pickup truck sold in the United States. Ford F-150 owners, RAM 1500 and RAM 2500 operators, Chevrolet Silverado 1500 and 2500 drivers, GMC Sierra owners, Toyota Tundra enthusiasts, and Nissan Titan users will all find that the tailgate hook system seats firmly on standard lip-style tailgates without modification. The generous ramp length means the incline angle stays low and manageable regardless of your truck's bed height — critical for heavy ATVs, wide-stance side-by-side UTVs, and long-wheelbase motorcycles that punish steep grades. Mid-size truck owners driving a Ford Ranger, Chevy Colorado, or Toyota Tacoma will find these ramps equally at home on their shorter tailgates, providing an even gentler approach angle. • 1,500 LB combined weight capacity (750 LB per ramp) — rated for full-size ATVs, side-by-side UTVs, dirt bikes, sport motorcycles, and riding lawn mowers without flex or sag • 7.5-foot full extended length per ramp creates a low-angle incline that eliminates scraping, jarring drops, and the white-knuckle moments that come with short, steep ramps • Anti-slip ribbed surface channels mud, water, and debris away from the tire contact zone, maintaining positive grip for both rubber tires and work boots in wet, muddy, or dusty field conditions • Folding design collapses each ramp to a compact, manageable size for effortless storage in a truck bed toolbox, garage wall hook, or enclosed trailer • Lightweight aluminum construction means a single operator can deploy, position, and retrieve both ramps without assistance, fatigue, or a strained back • Tailgate hook system locks onto standard pickup tailgate lips and stays anchored throughout the entire loading and unloading cycle — no sliding, no shifting • Material: Aircraft-grade aluminum alloy — corrosion-resistant, rust-proof, and maintenance-free • Extended length per ramp: 7.5 feet / 90 inches • Folded length per ramp: approximately 45 inches (half extended length) • Combined weight capacity: 1,500 LB • Per-ramp capacity: 750 LB • Surface treatment: Anti-slip ribbed/channeled profile • Attachment method: Integrated tailgate lip hooks, no tools required • Quantity: 2 ramps included per set The materials story matters when you are dropping these ramps in mud, rain, and gravel season after season. Every structural component is fabricated from aluminum alloy chosen for its exceptional strength-to-weight ratio — delivering the rigidity of steel-reinforced designs at a fraction of the mass. Unlike steel ramps that corrode, rust, and pit after a single wet season, aluminum oxide forms a natural protective layer that actively resists corrosion without any coating, painting, or annual maintenance. The ribbed anti-slip surface is not a rubber overlay that peels or cracks — it is machined directly into the ramp deck, guaranteeing permanent traction that cannot delaminate, wear off, or absorb mud and water in a way that reduces grip. The folding hinge mechanism uses thick, reinforced pivot hardware rated for thousands of fold-unfold cycles, so these ramps remain as tight and wobble-free on year five as they are out of the box. Welded cross-supports underneath the deck distribute load evenly across the full ramp width, preventing the deck flex and bounce that makes cheap ramps dangerous when rolling heavy equipment. Setting up the CYDD ramp set takes under two minutes with zero tools required. Step one: lower your pickup truck tailgate to the fully open, horizontal position. Step two: unfold each ramp by pulling the hinged section outward until it locks flat and secure — you will hear and feel the hinge click into the extended position. Step three: position each ramp so that the integrated hook at the top of the ramp seats firmly over the tailgate lip — space the two ramps to match the track width of your ATV, UTV, or the center line of your motorcycle or lawn mower wheels. Step four: apply light downward pressure on the ramp deck to confirm the hooks are seated and the ramps are not shifting laterally. Step five: walk your machine up the ramps slowly and steadily, keeping throttle input smooth to avoid wheel spin on the ribbed surface. Step six: once loaded and secured, simply lift each ramp off the tailgate hook, fold the hinge back to the collapsed position, and stow both ramps flat in your truck bed, cargo area, or storage location of your choice. Reverse the process for unloading. For solo operators loading heavy side-by-side UTVs, use a winch or come-along attached to your truck's tie-down points to control the descent safely. • 2x CYDD 7.5FT aluminum folding loading ramps (matched pair) • Integrated tailgate hook hardware (pre-installed on each ramp) • No additional hardware, tools, or assembly required When you shop with us, you get more than a product — you get a team that sources commercial-grade equipment tested against real-world US field conditions. Our product listings are built around honest specifications, not inflated marketing numbers. We stand behind every item with responsive customer support, straightforward return policies, and the confidence that comes from selling gear that actually performs on a Ford F-150 bed in Oklahoma red clay or a Silverado 2500 tailgate in a Pacific Northwest downpour. We make sure the ramp set you order is the ramp set that arrives — packaged securely, described accurately, and ready to work from day one. Order the CYDD 7.5FT Aluminum Folding Loading Ramp Set today. With 1,500 LB of combined capacity, a genuine anti-slip deck, and a folding design that stores as easily as it deploys, this is the last loading ramp set you will ever need to buy. Add to cart now and get your ATV, UTV, or motorcycle loaded and on the road faster than ever.