4Pcs Truck Bed Tie Down Anchors Boxlink Cleats Tie Down Bracket Plates For 07-22 Chevy Silverado,GMC Sierra,15-22 Chevy Colorado,GMC Canyon

Tired of watching your gear slam into the cab wall every time you brake hard on the interstate? Loose cargo is a safety hazard, a liability risk, and a fast way to destroy expensive equipment. These 4-piece Boxlink-style truck bed tie down anchor cleat plates are the permanent fix — engineered specifically for the factory anchor positions in your Chevy or GMC pickup bed. Compatibility is built into every dimension of this kit. These bed anchor cleats are precision-designed to drop into the factory stake pocket and floor anchor mounting positions found on the 2007-2022 Chevy Silverado (1500, 2500HD, 3500HD), 2007-2022 GMC Sierra (1500, 2500HD, 3500HD), 2015-2022 Chevy Colorado, and 2015-2022 GMC Canyon. Whether you drive a short-bed half-ton for weekend hauling, a heavy-duty Sierra 2500HD for work site runs, a mid-size Colorado as a daily driver, or a Canyon as your do-everything truck, this kit slots directly into your factory-spec positions. Always verify your specific trim level and bed configuration — short bed, standard bed, and long bed fitments are all supported across these model years — and confirm that your factory anchor access points are unobstructed by your current bed liner or bed cover setup. • Instantly secure any load — standard ratchet straps, bungee clips, cam buckle straps, and hook-style tie downs all connect directly to the anchor loops without adapters • Four anchors per kit mean you control all four corners of your cargo simultaneously, eliminating lateral shift and forward slide on acceleration and braking • Mirrors the factory GM Boxlink-style cleat system for a clean, integrated OEM-look finish that does not look like an afterthought bolted to your bed • Flush-mount profile sits level with your bed floor surface when anchors are not actively in use — no snagging cargo blankets, no tripping hazard during loading • Replaces worn, cracked, brittle, or missing factory tie-down loops at a fraction of dealer parts pricing and with zero dealer wait time • Compatible with most popular aftermarket bed liners, rubber bed mats, and tonneau covers that preserve factory anchor access cutouts • Quantity: 4 anchor cleat plates per complete set • Fitment: 2007-2022 Chevy Silverado 1500/2500HD/3500HD, 2007-2022 GMC Sierra 1500/2500HD/3500HD, 2015-2022 Chevy Colorado, 2015-2022 GMC Canyon • Mounting method: Drop-in to factory stake pocket and floor anchor positions — no drilling required • Loop opening: Accepts standard ratchet strap hooks, bungee clips, and carabiner-style tie down hardware • Profile: Flush-mount design, sits flush with bed floor surface when not loaded • Finish: Matte black for a stealthy, OEM-matched appearance • Bed configurations supported: Short bed, standard bed, long bed across compatible model years • Package includes: 4 anchor cleat plates, mounting hardware as applicable These anchor plates are constructed to withstand the real-world abuse of truck ownership — UV exposure, road salt, moisture, and the constant mechanical stress of loaded tie-down straps under tension. The cleat body is formed from high-strength engineered material with a matte black finish that resists oxidation and surface degradation far better than the factory plastic loops they replace. The anchor loop geometry is sized to accept a wide range of commercial tie-down hardware without pinching or deforming under load. Each plate is built with consistent wall thickness throughout, meaning there are no thin spots or weak zones that crack under repeated loading cycles. The mounting interface is machined to match GM factory tolerances so each cleat sits stable and rattle-free in its pocket without shimming or additional hardware improvisation. These are not generic universal anchors forced into place — they are a direct-fit component for your specific truck bed. Installation takes under fifteen minutes with basic hand tools and zero drilling or bed modification. Start by cleaning out the factory stake pocket or floor anchor positions with a brush — remove any dirt, debris, or rust scale that might prevent full seating. With the bed clear, orient the first cleat plate so the anchor loop faces upward and the mounting tabs align with the factory pocket slots. Press the plate down firmly into the pocket until it seats flush. If your kit includes fasteners, thread them by hand first before tightening with a socket or wrench — typically 8mm or 10mm — to the snug position. Repeat the same process for all four cleat plates, working corner to corner to ensure even placement. Once all four are seated, tug each anchor loop firmly by hand to confirm there is no movement or wobble. If a cleat feels loose, re-examine the pocket for debris or confirm you have the correct fitment for your specific bed configuration. Load your cargo, route your straps through the anchor loops, and tension your ratchet straps as you normally would. That is the entire process — no shop visit, no special tools, no modification to your factory bed. • 4x Boxlink-style truck bed tie down anchor cleat plates • Mounting hardware (where included per kit configuration) • No additional tools, adhesives, or drilling equipment required When you shop here, you get conversion-ready product listings that tell you exactly what you are buying, who it fits, and how it installs — no guessing, no mystery compatibility charts. We stock truck accessories built for working pickup owners who need reliable gear at honest prices. Fast processing and straightforward returns mean you can order with confidence whether you are outfitting a single truck or a small fleet of work vehicles. Do not let one more haul end with shifted cargo and dented panels. Add these 4-piece Boxlink-style bed tie down anchor cleat plates to your cart right now. Compatible with 2007-2022 Chevy Silverado, 2007-2022 GMC Sierra, 2015-2022 Chevy Colorado, and 2015-2022 GMC Canyon — order today and get your bed secured before your next run.