2x LED License Plate Light Tag Lamp Assembly Replacement For Ford F150 F250 F350

Keep your Ford F-150, F-250, or F-350 street-legal and sharp-looking with this direct-fit 2-pack LED license plate light assembly. Designed as a true OEM-style replacement, this set delivers brilliant white illumination exactly where it needs to go — no hacks, no workarounds, no trips to a shop. Compatibility This 2-piece LED license plate lamp kit is engineered specifically to replace the factory tag light units found on Ford F-150, F-250, and F-350 pickup trucks across multiple model generations. Ford has utilized closely related license plate lamp housings throughout a broad span of F-series production years, meaning this kit covers a wide range of trucks with identical plug-and-play connectors that mate directly to the factory wiring harness — no splicing, no pin swapping, no adapter needed. Because trim levels and optional equipment can affect exact housing dimensions on some model years, we strongly recommend cross-referencing your existing factory part number or measuring your current housing before checkout. If you have any doubt, share your VIN with our team and we will confirm the correct match for your specific truck before your order ships. Key Benefits • Plug-and-play installation — the OEM-matched connector snaps directly into your truck's factory harness, so you can complete the swap in minutes without cutting a single wire or reaching for a multimeter. • Brilliant white LED output produces crisp, high-visibility illumination that makes your license plate clearly readable at night, keeping you compliant with all 50 states' rear lighting statutes. • Complete 2-piece set covers both license plate lamp positions simultaneously, delivering a matched, symmetric appearance that looks factory-correct from every angle. • LED technology draws a fraction of the current consumed by the original incandescent bulb, reducing parasitic load on your truck's electrical system and alternator over the long run. • Low-profile OEM-style housing sits flush against the tailgate or rear bumper panel — no gaps, no proud edges, no evidence you ever swapped the lights. • Extended LED service life means you will go through far fewer replacement cycles than with conventional tungsten bulbs, saving time and money over the life of your truck. Technical Specifications • Quantity: 2 lamp assemblies (left + right positions) • Light source: LED (solid-state, no filament) • Output color: Brilliant white • Input voltage: 12V DC (standard automotive) • Connector type: OEM-matched plug-and-play harness connector • Housing construction: ABS plastic shell with integrated LED board • Lens: Clear polycarbonate-style lens for maximum light transmission • Operating temperature range: -40°F to +185°F (-40°C to +85°C) Materials & Build Quality The housing on each lamp unit is molded from impact-resistant ABS plastic, the same category of engineering thermoplastic used throughout the automotive industry for exterior trim and lighting components. ABS offers a strong strength-to-weight ratio, resists road debris impact, and holds up against the UV exposure, moisture cycling, and temperature swings that come with year-round truck use in every US climate. The clear lens is formed from a polycarbonate-grade material that maximizes forward light transmission so your plate stays well-lit even in heavy rain or fog. Internal LED elements are mounted on a purpose-built circuit board calibrated for stable 12-volt automotive operation, meaning no flickering at idle and no buzz from your truck's sound system ground loop. The plug shell is precision-molded to match the OEM connector geometry, ensuring a secure, weatherproof locking fit that will not loosen from road vibration over time. Together, these material choices produce a lamp assembly that looks and performs exactly like the component that came on your truck from the factory — just with a significantly longer projected service life. Installation Guide Swapping out your old factory tag lights is a straightforward job you can complete in your driveway in under 20 minutes with basic hand tools. Start by gathering a plastic trim pry tool (a flathead screwdriver wrapped in tape works in a pinch) and a small Phillips screwdriver if your existing housing uses retention screws. Step one: open the tailgate or access the rear bumper panel to expose the license plate lamp housings — most F-series trucks allow access from the front face of the housing or from inside the bed near the tailgate hinge. Step two: use your trim pry tool to gently release the retaining clips holding the old housing in place; apply even pressure to avoid cracking the surrounding panel. Step three: once the housing is free, grasp the wiring pigtail and press the release tab on the OEM connector to unplug the old lamp. Step four: align the new LED assembly with the mounting pocket, press the OEM connector from the new lamp firmly into the factory harness socket until you feel it click and lock. Step five: press the new housing into the retaining clips until it snaps flush with the panel. Repeat for the second lamp on the opposite side. Step six: before buttoning everything up, cycle the park lights to confirm both new LED units illuminate correctly. That's it — no coding, no error-light resets needed on standard F-series trucks. What's in the Box • 2x LED license plate light lamp assembly (left + right) • OEM-matched plug-and-play wiring pigtail on each unit Why Shop With Us We stock and source parts built to perform in real American driving conditions — brutal Texas summers, salted Minnesota winters, high-mile commercial use. Every listing in our catalog is reviewed for fitment accuracy, and our support team is staffed by people who understand trucks, not just SKUs. If a part doesn't fit or shows up damaged, we make it right — no runaround, no lengthy claim forms. Fast domestic shipping gets your part to you quickly so your truck stays on the road and out of the driveway. Order Your LED License Plate Light Set Today Don't let a burned-out or cracked factory tag light become a fix-it ticket or a failed inspection. Grab this 2-pack LED license plate light assembly for your Ford F-150, F-250, or F-350, snap it in on a Saturday afternoon, and drive away with factory-clean lighting that will outlast the original by years. Add to cart now and get back on the road right.