Stainless Steel Quarter Fenders For Semi Trucks, 24" X 24" Semi Truck Fenders With Tube Bracket And Mounting Hardware, 1 Pair Right & Left Quarter Fender Set, Fit For Freightliner, Peterbilt

When you're running a Freightliner Cascadia or a Peterbilt 379 down the interstate, your quarter fenders take a beating from road salt, tire spray, mud, and debris every single mile. The Vevor 24"x24" Stainless Steel Quarter Fender Set was built to take that punishment and still look sharp when you roll into the terminal. One pair, zero compromises. Compatibility These quarter fenders are engineered to fit the most popular Class 7 and Class 8 North American long-haul tractors on the road today. Confirmed fitment platforms include the Freightliner Cascadia, Freightliner Classic XL, Freightliner Coronado, Peterbilt 379, Peterbilt 388, and Peterbilt 389. The 24"x24" footprint is the most common OEM quarter fender dimension across these platforms, designed to align directly with standard tube bracket mounting geometry found on North American production tractors. If your truck runs non-standard or aftermarket tube brackets from a custom build, measure your existing outer diameter before ordering to confirm hardware compatibility. This listing ships both the driver-side (left) and passenger-side (right) fenders together, so you replace the full axle position in a single transaction and avoid mismatched finishes from piecemeal sourcing. Benefits • Complete matched pair — driver-side and passenger-side ship together for consistent finish and symmetrical fitment across both sides of the truck, no separate orders needed. • Corrosion-proof 304 stainless steel resists road salt, fuel splatter, mud, standing water, and harsh winter conditions without rusting, pitting, or bubbling over years of highway use. • Mirror-polished finish delivers a fleet-ready, professional appearance that holds its shine with nothing more than a periodic wipe-down, no waxing or paint protection required. • Everything included — tube bracket and all mounting hardware ship in the box, eliminating an extra run to the hardware store before you can get your rig back on the road. • 24"x24" coverage footprint shields rear axle tires on most standard semi-truck configurations, maximizing spray and debris containment to protect your trailer, other drivers, and DOT compliance. • Sold as a set, this pair eliminates the freight cost and lead-time gap that comes from ordering individual fenders from two separate listings. Technical Specs • Fender width: 24 inches per fender • Fender length: 24 inches per fender • Material: 304 stainless steel • Finish: Mirror polished • Quantity: 1 pair (1 right + 1 left) • Mounting style: Tube bracket bolt-on • Hardware included: Yes — tube bracket plus all mounting bolts and fasteners • Application class: Class 7 and Class 8 semi trucks • Primary fitment: Freightliner Cascadia, Classic XL, Coronado; Peterbilt 379, 388, 389 Materials & Build Quality Vevor constructed these quarter fenders from 304-grade stainless steel, the industry benchmark for automotive and commercial truck exterior trim that must survive multi-year exposure to road chemicals. Unlike painted steel fenders that chip and rust at the edges, or aluminum units that oxidize and dull under UV exposure, 304 stainless holds structural integrity through continuous freeze-thaw cycling, chemical exposure from highway brine applications, and the mechanical stress of vibration from Class 8 drivetrains. The mirror-polished surface is not a coating or a film — it is a mechanical finish applied directly to the steel, which means it cannot peel, crack, or flake the way chrome-plated plastic can. The result is a fender that looks as good in year five as it did on installation day, requiring only a basic stainless steel cleaner to remove road film. The included tube bracket is matched to the fender geometry, ensuring the mounting interface distributes load evenly without stress concentrations at the bolt holes — a common failure point on cheaper single-piece stamped brackets. Installation Guide This is a straightforward bolt-on replacement designed for a professional driver or fleet shop mechanic to complete without specialized tooling. Begin by parking the truck on a level surface and applying the parking brake. Remove your existing quarter fenders by unbolting the tube bracket hardware — typically two to four fasteners per side depending on your current setup. Inspect the tube bracket mounting tube on your truck for corrosion or damage before proceeding; clean any rust scale with a wire brush if needed. Slide the new Vevor tube bracket onto your truck's existing fender support tube. Position the stainless fender panel over the bracket and align the pre-drilled bolt holes. Hand-thread all supplied fasteners before final torque to ensure even seating. Torque to specification using the hardware guide included in the kit — do not overtighten stainless fasteners, as thread galling can occur. Repeat the process on the opposite side. Conduct a final visual alignment check to confirm both fenders sit at equal height and projection. Total install time for an experienced shop tech is typically 30 to 60 minutes per side. If your tube bracket outer diameter differs from the supplied hardware, a standard pipe adapter available at most truck stops will bridge the gap without any fender modification. What's in the Box • 1x right-side (passenger) 24"x24" stainless steel quarter fender • 1x left-side (driver) 24"x24" stainless steel quarter fender • Tube bracket(s) for mounting • Complete hardware kit — bolts, nuts, and fasteners required for installation Why Shop With Us We stock Vevor commercial truck accessories specifically because fleet buyers and owner-operators need parts that arrive correctly described, correctly sized, and ready to install. Our product listings are built from hands-on category knowledge of Class 7 and Class 8 fitment requirements, not templated guesswork. When you order this quarter fender set, you get exactly what the listing describes — a matched stainless pair with hardware — shipped to your door or your fleet yard. We stand behind the products we carry, and our support team understands truck parts, not just order numbers. Ready to protect your rig and sharpen its road presence? Add the Vevor 24"x24" Stainless Steel Quarter Fender Set to your cart now and get both sides done right — one order, one delivery, zero rusting.