60" X 24" X 14", Hitch Cargo Carrier, 500 Lbs Capacity Hitch Cargo Carrier With Anti-Rattle Hitch Stabilizer, Folding Hitch Mount Cargo Carrier With Pins And Latches, Fit For SUVs/Pickup Trucks

Done fighting for cargo space every time you load up for a camping trip, job site, or cross-country haul? The Vevor 60"×24"×14" Folding Hitch Cargo Carrier gives your pickup truck, full-size SUV, or light-duty commercial rig a massive rear load platform that bolts onto your existing 2-inch receiver hitch in minutes — zero drilling, zero bed liner damage, zero regret. COMPATIBILITY This carrier is engineered around the industry-standard Class III and Class IV 2-inch square receiver, which means it slots directly onto virtually every popular half-ton and three-quarter-ton pickup built in the last two decades. Confirmed fitments include the Ford F-150 (all cab configs), RAM 1500 and RAM 2500, Chevy Silverado 1500 and Silverado 2500HD, GMC Sierra 1500 and Sierra 2500HD, Toyota Tundra, and Nissan Titan. Full-size SUV owners are equally covered: Ford Expedition, Chevrolet Tahoe and Suburban, GMC Yukon and Yukon XL, Toyota 4Runner, and Jeep Grand Cherokee all use Class III or IV receivers as standard or dealer-option equipment. Always cross-check your specific vehicle's hitch tongue-weight rating against the 500 lb static capacity before loading — your hitch is the limiting factor, not the carrier. KEY BENEFITS • Massive 500 Lb Rated Capacity — One of the highest weight ratings at this price point. Haul tool chests, camping coolers, motorcycle parts, luggage, generator sets, and sports equipment without worrying about the platform buckling. • Anti-Rattle Hitch Stabilizer Included — The integrated rattle-reduction bolt assembly cinches the shank tight inside the receiver tube, eliminating the metal-on-metal clunking that ruins drives on rough roads and gravel trails. • Fold-Up Platform Design — The entire 60-inch deck pivots upward to a near-vertical position so you retain full access to your truck's tailgate or SUV's liftgate without unloading the carrier first. • Tool-Free Pin-and-Latch Securing System — Hitch pins and locking latches ship in the box. No additional hardware or trips to the hardware store required. • Open Steel Mesh Deck — The grid deck surface sheds rain, mud, and road spray instantly, preventing the pooling and corrosion that solid-floor carriers suffer from on work trucks and daily drivers alike. • Broad Receiver Compatibility — Class III and Class IV fitment means one carrier works across your entire fleet, whether you're rotating it between a work van, a personal pickup, or a rental truck. TECHNICAL SPECIFICATIONS • Platform Dimensions: 60" (L) × 24" (W) × 14" (H) cargo side rails • Static Load Capacity: 500 lbs • Hitch Receiver Size: 2-inch square, Class III / Class IV • Shank Insertion Depth: Approximately 5.5 inches • Frame Construction: Heavy-gauge welded square steel tubing • Deck Surface: Open steel mesh, drainage-optimized • Mounting Hardware: Hitch pins and latches included • Finish: Black powder coat for corrosion resistance MATERIALS & BUILD QUALITY The Vevor hitch cargo carrier is constructed from heavy-gauge square steel tubing, MIG-welded at every joint for structural integrity under dynamic road loads. Unlike thin-wall competitors that flex visibly when you load them, the welded frame on this carrier maintains rigidity whether you're hauling a 200 lb tool box or stacking firewood to the rail tops. The open-grid steel mesh deck is welded, not clipped, to the frame perimeter — meaning the deck won't shift or pop loose when the load shifts during hard braking or trailer-towing maneuvers. Every exterior surface receives a black powder-coat finish that resists road salt, UV fade, and the abrasive wear of loading and unloading gear week after week. The hitch shank is machined to tight tolerances against the 2-inch receiver spec, which is why the anti-rattle assembly actually works on this unit: there's minimal slop to begin with, and the stabilizer bolt closes the remaining gap completely. This is the level of material specification that separates a long-term work tool from a single-season throwaway carrier. INSTALLATION GUIDE Installing the Vevor folding hitch cargo carrier takes most users under ten minutes with no special tools. Step 1: Park on level ground and ensure your vehicle's 2-inch Class III or IV hitch receiver is clean and free of debris. Step 2: Slide the carrier's hitch shank — 5.5 inches of insertion depth — fully into the receiver tube until the cross-holes align. Step 3: Insert the included hitch pin through the aligned holes and secure the locking latch or clip to prevent pin walkout on the road. Step 4: Thread the anti-rattle stabilizer bolt up through the bottom of the receiver collar until it contacts the shank firmly, then tighten with a wrench — hand-snug plus a quarter turn is sufficient. Do not over-torque. Step 5: Lower the cargo platform to the horizontal load position and verify the fold pivot locks securely. Step 6: Load your gear evenly, keeping heavier items centered and low over the shank for best tongue-weight distribution. Step 7: When you need tailgate access, lift the platform upward to its near-vertical folded position — it will stay there while you load the truck bed. Re-lower and re-verify the platform lock before driving. WHAT'S IN THE BOX • 1× Vevor 60"×24"×14" folding steel cargo carrier platform • 1× 2-inch hitch shank with anti-rattle stabilizer bolt assembly • 1× Set of hitch pins and locking latches • 1× Hardware bag (fasteners, washers) • 1× Installation instruction sheet WHY SHOP WITH US We stock Vevor hitch cargo carriers and ship from US-based fulfillment centers so your order moves fast — no six-week ocean freight waits. Every order is inspected before dispatch, and our customer support team knows these products inside and out. If a weld is wrong or a pin is missing from the box, we make it right with a replacement part or a full return, no drama. We've equipped work fleets, weekend warriors, and overlanders with this exact carrier and stand behind it completely. ADD TO CART TODAY Your F-150, Silverado, RAM, Tundra, Expedition, or Tahoe is sitting at the curb with 500 lbs of hauling capacity waiting to be unlocked. Click Add to Cart, get the Vevor 60-inch folding hitch cargo carrier on its way to your door, and stop leaving gear behind on the next run.