Overland Truck Bed Rack, 51.2-65.4 In Width, Adjustable Overland Bed Cargo Rack With Sidebar, 900 Lbs Static Capacity, Compatible With Mid-Size Trucks Tacoma/Ranger/Gladiator JT/Colorado/Canyon

Take your overland build seriously with a bed rack that actually keeps up. The Vevor Overland Truck Bed Rack delivers a rugged, fully adjustable platform for mid-size truck owners who need dependable gear storage on trails, job sites, and highway hauls alike. With a 900 lb static load rating and a width range of 51.2 to 65.4 inches, this rack is engineered to match the real-world demands of adventure-ready pickups. Compatibility This overland bed rack is purpose-built for mid-size pickups with inner bed widths falling between 51.2 and 65.4 inches. Confirmed compatible vehicles include the Toyota Tacoma (2nd and 3rd Gen), Ford Ranger (2019–2024), Jeep Gladiator JT (2020–2024), Chevrolet Colorado (2015–2024), and GMC Canyon (2015–2024). The adjustable crossbar design means one rack fits multiple platforms without requiring separate brackets or adapters for each make. Always measure your inner bed rail width before purchasing to confirm a precise fit. If your truck falls within that range, installation is straightforward and no drilling is required on most applications. Key Benefits • Adjustable 51.2–65.4 in width fits five popular mid-size truck platforms with a single rack system, eliminating the need for truck-specific SKUs. • Integrated sidebar rails expand your tie-down options, letting you secure kayaks, lumber, jerry cans, bike frames, and overland recovery gear without improvised rigging. • 900 lb static load capacity handles rooftop tents, overlanding gear, tool boxes, and camping equipment without sagging or flexing under real trail conditions. • No-drill mounting on most compatible trucks preserves bed liner and resale value while still locking the rack firmly in place. • Open crossbar design maintains bed access, allowing you to load and unload cargo from both sides without removing the rack. • Low-profile stance keeps aerodynamic drag manageable for everyday commuting and highway driving between adventures. Technical Specifications • Adjustable Width: 51.2 in to 65.4 in (inner bed rail measurement) • Static Load Capacity: 900 lbs • Crossbar Material: Heavy-duty steel with black powder-coat finish • Sidebar: Included — integrated longitudinal rail for side-mounted accessories • Mounting Style: Clamp-over bed rail, no drilling required on most compatible trucks • Finish: Matte black powder coat, corrosion-resistant • Compatible Trucks: Toyota Tacoma, Ford Ranger, Jeep Gladiator JT, Chevrolet Colorado, GMC Canyon • Number of Crossbars: 2 main crossbars with adjustable spread Materials & Build Quality The Vevor Overland Bed Rack is fabricated from heavy-gauge steel tubing that delivers the structural rigidity needed when you're stacking a rooftop tent plus a full load of gear over rough terrain. The entire frame receives a matte black powder-coat finish that resists chipping, rust, and UV degradation better than standard paint applications. Welded joints are reinforced at every stress point — crossbar-to-upright connections, sidebar attachment nodes, and clamp saddles — so there's no flex or rattle even when loaded near maximum capacity. The hardware kit uses zinc-plated fasteners throughout to prevent galvanic corrosion where dissimilar metals contact the aluminum bed rails common on Tacoma and Ranger builds. Every dimensional tolerance on the adjustment slots is machined tightly enough that width changes lock down without play, keeping the rack perfectly centered in your bed mile after mile. Installation Guide Installing the Vevor Overland Bed Rack on a mid-size truck is a two-person job that typically takes 45 to 90 minutes with basic hand tools. Begin by measuring the inner width of your truck bed between the tops of the bed rails to confirm you fall in the 51.2–65.4 in range. Step 1: Lay both crossbar assemblies across the bed and loosen the width-adjustment bolts. Step 2: Slide each crossbar to match your measured bed width, then snug the adjustment bolts finger-tight. Step 3: Position the clamp brackets over each bed rail, ensuring the rubber-lined saddles sit flush against the rail surface — these cushions protect your finish and provide friction grip. Step 4: Thread the clamp bolts from underneath and torque to specification (typically 25–30 ft-lb; confirm in the included instruction sheet). Step 5: Attach the sidebar rails to the pre-drilled mounting tabs on each crossbar using the provided hardware. Step 6: Recheck all fasteners after a 25-mile break-in drive and re-torque as needed. No cutting, welding, or bed modification is required for standard installations. What's in the Box • 2 x Main crossbar assemblies (adjustable width) • 1 x Sidebar rail set (left and right) • 4 x Bed rail clamp brackets with rubber-lined saddles • 1 x Complete hardware kit (zinc-plated bolts, nuts, washers) • 1 x Installation instruction sheet Why Shop With Us We stock Vevor overland accessories sourced directly from verified suppliers, so you get factory-quality products without the gray-market guesswork. Every order ships with full tracking so you can follow your rack from warehouse to driveway. Our 30-day defect warranty means that if anything arrives damaged or out of spec, we make it right — no lengthy back-and-forth. Our customer support team understands truck fitment and can answer compatibility questions before you buy, saving you the hassle of a return. We're committed to offering mid-size truck owners the overland hardware they need at prices that make outfitting an entire build realistic, not aspirational. Final CTA Ready to turn your Tacoma, Ranger, Gladiator, Colorado, or Canyon into a proper overland platform? Add the Vevor Adjustable Overland Truck Bed Rack to your cart today, lock in fast shipping, and start loading up for your next adventure. Stock is limited — secure yours now before your next trail date arrives.