5Ft Tri-Fold Truck Tonneau Cover For 04-12 Chevy Colorado GMC Canyon 06-08 Isuzu--A86315-2020401M32209YS

Protect your payload without sacrificing style. The Mankee 5ft Tri-Fold Soft Tonneau Cover is precision-engineered for owners of the 2004-2012 Chevrolet Colorado, 2004-2012 GMC Canyon, and 2006-2008 Isuzu i-Series who want a secure, low-profile bed solution that works as hard as they do. At $229, it delivers premium weather protection, aerodynamic gains, and effortless access — no compromises. Compatibility This tonneau cover is an exact fit for the 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, and 2012 Chevrolet Colorado and GMC Canyon equipped with the standard 5-foot (60-inch) short bed. Because the Isuzu i-Series shares the same GMT355 platform as the Colorado and Canyon, this cover also fits 2006, 2007, and 2008 Isuzu i-Series trucks with the identical 60-inch bed. Before ordering, measure your bed from the inside of the bulkhead to the inside of the tailgate — it must measure 60 inches. This cover is designed exclusively for the 5ft configuration and will not fit 6-foot or longer beds. It is not compatible with aftermarket drop-in bed liners that raise or alter rail dimensions. Spray-in liners are generally fine; confirm your rail height is unmodified. Key Benefits • Weather Protection: Heavy-duty matte black vinyl panels backed with marine-grade foam seals create a watertight barrier against rain, road dust, snow, and harmful UV rays, keeping every item in your cargo area dry and protected year-round. • Tri-Fold Convenience: Three equal-width panels fold forward in seconds, giving you instant full bed access for oversized loads — no tools, no hassle, no need to remove the entire cover. • Aerodynamic Efficiency: The flush-mount, low-profile design reduces wind drag over the open bed, helping improve fuel economy on highway drives compared to uncovered open-bed operation. • Secure Cargo: Integrated side latches lock each panel flat at highway speeds, eliminating wind lift and deterring unauthorized access to your gear. • Tool-Free Removal: When you need maximum hauling capacity, the complete cover detaches from the bed rails in minutes with no tools required, making it practical for versatile work or weekend use. • Clean Appearance: The matte black finish complements factory paint on Colorado, Canyon, and i-Series trucks without adding bulk or visual clutter. Technical Specs • Bed Fit: 5-foot / 60-inch short bed only • Fold Style: Tri-fold — 3-panel forward fold • Panel Surface: Heavy-duty matte black vinyl • Seal System: Marine-grade foam perimeter seal on all rails and tailgate • Latch System: Integrated side panel latches, highway-speed rated • Profile: Low-profile flush-mount design • Compatible Vehicles: 2004-2012 Chevrolet Colorado, 2004-2012 GMC Canyon, 2006-2008 Isuzu i-Series (5ft bed) • Removal: Tool-free full removal capability Materials and Build Quality The Mankee tonneau cover is constructed around a reinforced aluminum cross-bow frame that keeps panels taut and flat at highway speeds without sagging or bowing under load. The outer skin is a heavy-duty matte black vinyl compound selected for UV resistance and year-round flexibility — it won't crack in sub-zero winters or go brittle under summer sun. The underside foam padding adds a secondary layer of protection for cargo resting against the panels. All rail seals are cut from marine-grade closed-cell foam, the same material used on watercraft to prevent intrusion — not the budget open-cell foam found on bargain covers. Mounting clamps are corrosion-resistant and designed to grip the factory rail without drilling or permanent modification, preserving your truck's resale value. Every fold hinge is double-stitched and reinforced at stress points to handle thousands of open-close cycles across the life of the truck. Installation Guide Installing the Mankee tri-fold tonneau cover on your Colorado, Canyon, or i-Series requires no drilling and takes approximately 15-20 minutes with basic hand tools. Step 1: Lay the folded cover assembly across the bed with the hinge side facing the cab. Step 2: Align the front header rail flush against the front bed wall (bulkhead), centered side to side. Step 3: Slide the provided mounting clamps onto the bed rail at evenly spaced positions — typically two per side as indicated in the included instruction sheet. Step 4: Hand-tighten each clamp to seat the header and side rails. Step 5: Unfold all three panels toward the tailgate to confirm even coverage and proper seal contact on both sides and at the tailgate. Step 6: Use the included hex key to fully torque each clamp to the specified setting — do not overtighten as this can warp the rail. Step 7: Close the tailgate and press the side latches to verify the locking mechanism seats correctly. Step 8: Run your hand along the foam perimeter seal to confirm continuous contact with no gaps. If gaps appear at a corner, loosen the nearest clamp, reposition, and re-torque. The entire process requires only the included hardware and a standard hex wrench. What's in the Box • 1x Mankee tri-fold soft tonneau cover assembly (pre-folded, 3-panel) • Mounting clamp set (pre-matched to 5ft bed configuration) • Hex wrench / installation tool • Detailed installation instruction sheet • Foam perimeter seal (pre-applied to rails) Why Shop at Expedite At Expedite, we curate truck bed accessories that are precisely matched to real vehicle fitments — not vague universal listings that waste your time. Every product listing is verified for accuracy, and our team reviews compatibility data so you receive the right part for your specific truck. We stand behind every order with responsive customer support, transparent return policies, and fast fulfillment so your Colorado, Canyon, or i-Series is back on the road with maximum protection as quickly as possible. Add the Mankee 5ft Tri-Fold Tonneau Cover to your cart today and give your truck bed the weather protection, security, and clean look it deserves. In stock and ready to ship — order now.