6FT Soft Roll Up Tonneau Cover For 04-14 Chevrolet Colorado 04-12 GMC Canyon--A86315-M44210S

Protect your payload and sharpen your truck's look with the Mankee 6FT Soft Roll-Up Tonneau Cover — engineered specifically for first-generation Chevrolet Colorado and GMC Canyon owners who want a durable, weather-tight bed cover at a price that makes sense. Whether you haul tools Monday through Friday or gear up for weekend adventure, this cover delivers clean, functional protection every mile. This tonneau cover is purpose-built for the 2004–2014 Chevrolet Colorado and the 2004–2012 GMC Canyon fitted with a standard 6-foot (72-inch) truck bed. To confirm fitment before ordering, measure the inside of your bed from the bulkhead to the tailgate — you need a true 6-foot measurement. This cover is NOT compatible with the shorter 5-foot bed or the longer 7-foot bed. It also does NOT fit the 2015-and-newer second-generation Colorado or Canyon platform, which uses a completely different bed rail profile. If your truck has been modified with aftermarket bed liners, raised bed caps, or altered stake pockets, please verify clearance before purchasing. Standard-cab and extended-cab configurations with the 6-foot bed are both supported. • Full bed access in seconds: Unsnap the hook-and-loop fasteners along both side rails and roll the cover forward toward the cab — the included hook straps lock it in place so the cover stays out of your way while you load or unload. • Superior weather resistance: Triple-layer vinyl construction creates a tight, water-shedding barrier against rain, UV rays, snow, and road grime, keeping your cargo dry and protected in all four seasons. • Low-profile flush fit: The roll-up design sits flush with your factory bed rails, maintaining the clean factory aesthetic of your Colorado or Canyon without adding unwanted height or bulk that could increase wind resistance. • No drilling required: Clamp-on extruded aluminum side rails attach directly to your existing bed rails without any drilling, tapping, or permanent modifications — your truck stays stock and resale value is preserved. • Toolbox compatible: The cover is compatible with most cab-end truck toolboxes, giving work-truck owners the option to keep their storage box while still protecting the rest of the bed. • Fuel economy benefit: By reducing aerodynamic drag over an open truck bed, this tonneau cover can contribute to modest improvements in highway fuel economy — a small but real perk over time. • Product Type: Soft roll-up tonneau cover • Bed Fit: 6 feet / 72 inches (measured bulkhead to tailgate interior) • Fitment: 2004–2014 Chevrolet Colorado (1st Gen); 2004–2012 GMC Canyon (1st Gen) • Cab Configurations Supported: Standard cab, extended cab with 6FT bed • Cover Material: Triple-layer marine-grade vinyl • Frame/Rail Material: Extruded aluminum side rails • Fastening System: Hook-and-loop snaps with hook retention straps • Finish: Matte black • Installation Method: No-drill clamp-on; no permanent modifications required • Compatibility Warning: Does NOT fit 5FT or 7FT beds; does NOT fit 2015+ Gen 2 Colorado/Canyon The Mankee tonneau cover is constructed from heavy-duty triple-layer vinyl — the same material standard used across premium marine and outdoor protective gear. The outer layer is UV-stabilized to resist fading, cracking, and brittleness even under prolonged sun exposure in hot climates. The inner layers add tensile strength and a water-resistant barrier that channels rain and snowmelt away from your bed rather than pooling on top of the cover. The aluminum side rails are extruded — not stamped — meaning they hold their shape under load and resist corrosion over years of outdoor use. All clamp hardware is zinc-coated to prevent rust. Stitching along the vinyl edges is reinforced with double-needle technique, eliminating the weak seam separation common on budget covers. The matte black finish blends naturally with factory truck colors and resists showing smudges and dust between washes. Every component in this kit is designed to survive real-world truck use, not just look good in a showroom. Installing the Mankee tonneau cover on your Colorado or Canyon is a straightforward process most owners complete in under 30 minutes with no special tools. Step 1: Clean your bed rails with a dry cloth to remove dirt and debris that could prevent clamps from seating flush. Step 2: Lay the rolled cover across the bed and position the aluminum side rails along the inside edge of each bed rail — ensure they are aligned evenly from bulkhead to tailgate. Step 3: Hand-tighten the clamp brackets at each mounting point along the side rails, starting from the cab end and working rearward. Step 4: Use a wrench or socket to snug the clamps firmly — do not overtighten, as this can distort the rail. Step 5: Attach the front seal strip to the bulkhead using the included adhesive-backed weatherstrip. Step 6: Unroll the cover from the cab to the tailgate and press the hook-and-loop fasteners down along both rails to tension the vinyl flat. Step 7: Test the roll-up operation by unsnapping and rolling the cover forward, then secure with the hook straps. Verify the cover lies flat and the rear edge seals cleanly against the tailgate. No drilling, no professional installation needed. • (1) Mankee triple-layer vinyl roll-up tonneau cover panel • (2) Extruded aluminum side rails with integrated clamp brackets • (1) Front bulkhead foam seal strip • (2) Hook retention straps for securing rolled cover • Installation hardware kit (bolts, nuts, clamp blocks) • Printed installation instruction sheet When you shop with us, you get more than a part — you get a team that specializes in truck accessories for working and recreational pickups. We stock fitment-verified products and back every sale with responsive US-based customer support. Our streamlined fulfillment process means your Mankee tonneau cover ships fast so your truck isn't sitting exposed any longer than necessary. We stand behind every product we carry with straightforward return policies and clear communication from purchase through delivery. Ready to protect your 2004–2014 Chevy Colorado or 2004–2012 GMC Canyon bed? Add the Mankee 6FT Soft Roll-Up Tonneau Cover to your cart today — no-drill installation, all-weather protection, and a flush factory look delivered straight to your door.