For 2014 Dodge Challenger 68189148AA Headlight S Witch Auto Headlight & Fog Light

Is your 2014 Dodge Challenger ignoring your headlight or fog light inputs? A worn-out combination switch is the number-one cause — and this direct-fit Mankee replacement, cross-referenced to OEM part number 68189148AA, puts you back in full control of your Challenger's lighting system for a fraction of what the dealership charges. This switch is engineered exclusively for the 2014 Dodge Challenger. It replicates the factory-installed combination headlight and fog light control switch found on the instrument panel of LC-generation Challengers built with the auto headlight and fog light option package. Before ordering, confirm your specific Challenger was built with the auto headlight feature by checking the RPO codes on your door-jamb sticker or vehicle build sheet. This is not a universal lighting switch — it is a model-specific, year-specific replacement that matches OEM part number 68189148AA. If your Challenger did not come with auto headlights from the factory, this switch is not the correct application. When in doubt, cross-reference your VIN with a Dodge parts professional before purchasing. • Eliminates flickering, stuck, or completely unresponsive headlight and fog light controls caused by a failed factory switch — restores factory switching behavior immediately after installation • Retains the auto headlight mode so your Challenger's ambient light sensor continues to trigger the headlamps automatically, exactly as Dodge originally designed • Plug-and-play OEM-style wiring harness connector clips directly into the factory socket — zero cutting, splicing, or rewiring required for a clean, professional-grade repair • Saves significant money versus dealership parts pricing; at $39.65 this is a budget-smart maintenance repair that any DIY-capable owner can complete at home • Covers both headlight switching functions and fog light activation in a single integrated unit, eliminating the need to source two separate components • Built to withstand the heat cycles, cabin vibration, and UV exposure common inside a high-performance muscle car cockpit across all US climate zones from the desert Southwest to the upper Midwest • OEM Cross-Reference Part Number: 68189148AA • Switch Type: Combination rotary/stalk headlight and fog light control switch • Connector Type: OEM-matched multi-pin wiring harness plug (no adapter required) • Operating Positions: Off / Parking Lights / Headlights / Auto (ambient sensor-activated) • Fog Light Control: Integrated rotary activation on the same switch stalk • Voltage Rating: 12V DC, compatible with standard Challenger electrical system • Mounting Style: Direct instrument panel replacement, OEM bracket-compatible • Fitment: 2014 Dodge Challenger with factory auto headlight and fog light equipment only This replacement switch is constructed from high-grade ABS plastic with reinforced internal contact terminals designed to replicate the physical and electrical durability of the original Chrysler/Dodge OEM component. The rotary knob and switch stalk are molded to the same dimensional tolerances as the factory part, ensuring the switch seats flush in the instrument panel bezel without gaps, rattles, or misalignment. Internal contact surfaces are engineered to handle the repeated switching cycles a daily-driven muscle car demands, resisting the oxidation and carbon fouling that causes the original switch to fail over time. The wiring harness connector is injection-molded from heat-resistant thermoplastic with precision-stamped terminals that deliver a positive, corrosion-resistant connection to the factory socket. Whether you are in Phoenix summer heat or a Minneapolis winter garage, this switch is built to perform reliably across the full range of North American ambient temperatures a Challenger owner is likely to encounter. Installing this switch is a straightforward job that most 2014 Dodge Challenger owners with basic hand tools can complete in under 30 minutes. Step 1: Disconnect the negative terminal of your battery and allow the vehicle's electrical system to fully discharge for at least five minutes — this protects both you and the vehicle's electronics during the repair. Step 2: Use a trim removal tool or a wide plastic pry tool to gently pop out the instrument cluster trim panel surrounding the switch; Challenger trim panels use snap-in retaining clips that release with light, even pressure. Step 3: Once the panel is free, locate the factory headlight switch assembly. Step 4: Press the locking tab on the wiring harness connector and pull the connector straight back off the switch — do not twist or pry, as this can damage the connector housing. Step 5: If the switch itself is secured with a fastener or twist-lock collar, remove it and set aside. Step 6: Insert the new Mankee 68189148AA switch into the panel opening and secure it per the original mounting method. Step 7: Firmly push the factory wiring harness connector into the new switch until you hear or feel the locking tab click into place. Step 8: Reinstall the instrument panel trim piece by pressing the clips back in evenly. Step 9: Reconnect the negative battery terminal. Step 10: Test all switch positions — off, parking, headlights, auto mode, and fog lights — before closing up your interior. • 1x Mankee Replacement Combination Headlight and Fog Light Switch (OEM ref. 68189148AA) • Installation is DIY; no additional hardware or adapter harness required At this price point, Mankee's 68189148AA replacement switch gives Dodge Challenger owners a reliable, OEM-accurate solution without the inflated cost of a dealership parts counter or the compatibility risk of a poorly-cataloged generic switch. Every switch ships ready for direct plug-in installation, and our product listings are built around accurate vehicle fitment data so you order with confidence. We stock automotive switches purpose-selected for the most common failure points in American muscle cars and light-duty trucks, and we back each purchase with clear return and support policies so your repair experience is straightforward from order to installation. Don't let a failed headlight switch leave your 2014 Dodge Challenger dark on the road. Order the Mankee 68189148AA headlight and fog light combination switch today, restore full factory lighting control, and get back to driving your Challenger the way it was built to be driven.