For Ford 16-19 Explorer Black Top Roof Rack Cross Bar Cargo Carrier-Aluminum

Turn your 2016-2019 Ford Explorer into a true hauling machine with the Mankee black aluminum roof rack cross bar set — purpose-built for the 5th-generation Explorer and designed to bolt directly onto your factory side rails in under 30 minutes. Whether you're heading to the trailhead, the job site, or the ski mountain, these crossbars give you a rock-solid overhead cargo platform without a single trip to a shop. Compatibility: This cross bar set is engineered exclusively for the 5th-generation Ford Explorer covering model years 2016, 2017, 2018, and 2019. The mounting hardware and clamp profile are pre-matched to the Explorer's factory side roof rail dimensions, ensuring a snug, integrated fit. Important: Your Explorer must have factory-installed side rails for these crossbars to mount correctly. This kit is not compatible with bare-roof Explorer trims that lack factory rails. If you are unsure whether your vehicle has side rails, check the roofline for two raised horizontal tracks running front-to-back on either side of the roof — those are your factory rails, and this kit is built for exactly that configuration. Key Benefits: • Dramatically expands overhead cargo capacity — carry kayaks, bicycles, ski bags, cargo boxes, rooftop tents, lumber, and more without sacrificing interior space • True direct-fit bolt-on design eliminates guesswork; mounting clamps are pre-matched to the 2016-2019 Explorer factory rail profile for a seamless, integrated look • Sleek matte black powder-coated finish blends naturally with the Explorer's roofline and resists UV fading, rust, and road grime season after season • Lightweight yet rigid aluminum construction keeps your vehicle's center of gravity low while delivering impressive load-bearing performance • Compatible with the majority of aftermarket roof rack accessories including cargo baskets, bike mounts, kayak saddles, ski carriers, and rooftop tent platforms • Complete ready-to-mount kit — every bar and every piece of required hardware is included so you can install and load up the same day it arrives Technical Specifications: • Vehicle Fit: 2016, 2017, 2018, 2019 Ford Explorer (5th Generation) • Construction Material: High-grade aluminum alloy • Finish: Matte black powder coat • Mounting Type: Clamp-on, direct-fit for factory side roof rails • Quantity: 2 cross bars per set • Installation Time: Approximately 25-30 minutes with basic hand tools • Finish Resistance: UV-resistant, corrosion-resistant, weather-sealed coating • Accessory Compatibility: Standard T-slot or strap-mount aftermarket rack accessories Materials and Build Quality: The Mankee crossbar set is constructed from a high-grade aluminum alloy that strikes the optimal balance between rigidity and weight savings. Aluminum's natural corrosion resistance means these bars won't rust through a Michigan winter or a Pacific Northwest rainy season. On top of that, the bars are finished in a matte black powder coat — not a thin spray paint — which bonds at a molecular level to the aluminum surface, creating a UV-stable, chip-resistant shell that keeps the bars looking factory-fresh even after years of loading and unloading gear in all weather conditions. The mounting clamps are precision-formed to grip the Explorer's factory rail profile firmly, eliminating the flex, rattle, and creep that plague universal-fit crossbars. Every edge is deburred and finished so there are no sharp contact points that could damage your roof rack accessories or cargo straps during long highway drives. Installation Guide: Installing these crossbars on your 2016-2019 Ford Explorer is a straightforward process that requires no drilling, no body modification, and no professional help. Start by cleaning the top surface of your factory side rails with a dry cloth to remove any debris or moisture. Open the packaging and lay out both crossbars and all included hardware on a clean surface to confirm everything is present. Locate the front and rear mounting positions on your Explorer's factory rails — typically marked by rail end caps or natural spacing guides on the rail channel. Slide the pre-attached clamp brackets into position on each end of the first crossbar, then lower the bar onto the factory rail and hand-tighten the clamp bolts until the bar sits level and centered. Repeat for the second crossbar at the rear position. Once both bars are seated on the rails, use the included wrench or a standard hand tool to tighten all four clamp bolts to a firm, snug torque — do not over-torque, as the clamps are designed for secure grip without deforming the rail. Give each bar a firm lateral shake to confirm there is zero play. The entire process takes most owners 25 to 30 minutes. We recommend re-checking bolt tightness after your first 50 miles of driving. What's in the Box: • 2x Matte black aluminum cross bars (front and rear) • 4x Pre-matched mounting clamp brackets • 1x Complete hardware pack (bolts, washers, nuts) • 1x Installation instruction sheet Why Shop With Us: We source direct-fit vehicle-specific accessories with tight quality controls so you receive parts that install cleanly and perform reliably from day one. Every order ships with full hardware included — no surprise trips to the hardware store. Our product listings are built on real fitment data, so when the listing says it fits your 2016-2019 Ford Explorer with factory rails, it means it. If for any reason the product doesn't meet your expectations, our US-based customer support team is ready to help with returns, exchanges, and fitment questions. Ready to maximize your Explorer's cargo potential? Add the Mankee black aluminum roof rack cross bar set to your cart today and transform your roofline into a serious hauling platform — no shop appointment required.