Tail Light Assembly Compatible With 1999-2003 Chevy Silverado 1999-2006 GMC Sierra 1500 1500 HD 2500 2500 HD 3500, 2007 GMC Sierra Classic Driver & Passenger Side Taillights Without Bulbs (2PCS)

Cracked lenses, sun-faded housings, and failed brake-light circuits don't just look bad — they're a safety hazard and a fast ticket from law enforcement. This complete 2-piece tail light assembly for the 1999-2003 Chevy Silverado and 1999-2007 GMC Sierra gets your truck road-legal and looking sharp again, all without dealership markup or the hassle of ordering two separate parts. Compatibility This replacement tail light set is precision-engineered to fit the following vehicles exactly: 1999, 2000, 2001, 2002, and 2003 Chevrolet Silverado across all cab configurations (Regular, Extended, and Crew Cab) and bed lengths; 1999, 2000, 2001, 2002, 2003, 2004, 2005, and 2006 GMC Sierra in 1500, 1500 HD, 2500, 2500 HD, and 3500 trim levels; and the 2007 GMC Sierra Classic. Both driver-side (left) and passenger-side (right) assemblies are included in one purchase, so you receive a perfectly matched pair from the start. Note: Bulbs are not included — reuse your factory bulbs or upgrade to LEDs. Always verify fitment against your vehicle's full VIN before ordering, paying close attention to cab style, bed length, and trim designation. Key Benefits • Complete matched pair — driver and passenger side assemblies ship together, eliminating back-and-forth ordering and ensuring identical lens clarity across both sides. • Direct OEM-style plug-and-play fit — mounting brackets align precisely with factory bolt holes, and wiring pigtails match the factory harness connectors for a zero-modification swap. • Crystal-clear DOT-compliant lens housing — maintains correct light output levels for brake, turn signal, and reverse functions, keeping you compliant with federal motor vehicle safety standards. • Broad multi-year fitment — a single part number covers Silverado and Sierra across multiple model years and payload ratings (1500 through 3500), drastically reducing the chance of ordering the wrong part. • No core charge — there is no deposit or return requirement for the old unit; simply remove and responsibly dispose of the damaged assembly. • Bulb-compatible flexibility — the housings accept both standard incandescent bulbs and aftermarket LED upgrades, so you control brightness and color temperature. Technical Specifications • Fitment: 1999-2003 Chevrolet Silverado; 1999-2006 GMC Sierra 1500, 1500 HD, 2500, 2500 HD, 3500; 2007 GMC Sierra Classic • Quantity: 2 pieces (1x driver side, 1x passenger side) • Bulbs included: No — reuse OEM bulbs or install aftermarket LEDs • Lens type: Crystal-clear polycarbonate-style outer lens with red inner reflector • Housing color: Black ABS plastic housing, red lens sections • Mounting: Direct OEM bolt-on pattern — no drilling or bracket modification • Wiring: Factory-matching pigtail connectors for brake, turn, and reverse circuits • Regulatory compliance: DOT-compatible lens output for brake, turn, and reverse functions Materials and Build Quality The outer lens panels are molded from impact-resistant polycarbonate-style material that resists the road vibration, stone chips, and UV degradation that plague older factory lenses. The inner housing shell is formed from rigid ABS plastic, which provides structural support during installation and long-term dimensional stability in temperature extremes — critical for trucks that work in northern winters and southern summers alike. Lens seams are bonded with a weatherproof perimeter seal to prevent moisture ingress that can fog the interior and oxidize your bulb sockets over time. The reflector panels inside each housing are vacuum-metallized to maximize light output, ensuring your brake and turn signals are visible at distance even in bright daylight. These materials collectively deliver a unit that looks factory-new on day one and is engineered to hold up through seasons of daily driving, towing, and hauling. Installation Guide Replacing these tail lights is a straightforward DIY job that most owners complete in 30-45 minutes with basic hand tools. Start by opening the tailgate and locating the tail light access panel or trim liner on the inside of the truck bed wall — this varies slightly between Regular Cab and Crew Cab configurations. Remove the 2-3 retaining nuts or bolts (typically 10mm) that secure the tail light housing to the bed panel. Carefully pull the housing rearward and away from the truck body, supporting its weight to avoid stressing the wiring harness. Depress the harness locking tab and disconnect the factory wiring pigtail from the rear of the housing. Transfer any existing bulbs from the old housing to the new assembly if you plan to reuse them, or install your chosen LED upgrades at this stage. Connect the factory wiring pigtail to the new assembly's connector until you hear or feel it click into place — this single locking clip carries all brake, turn, and reverse circuits. Align the new housing with the factory mounting studs, press it flush against the body panel, and reinstall the retaining nuts finger-tight before torquing to snug. Repeat the same process on the opposite side. Before buttoning everything up, have a helper cycle through brake, left turn, right turn, and reverse to confirm all circuits illuminate correctly. Reinstall any trim liners and close the tailgate. What's in the Box • 1x Driver-side (left) tail light assembly • 1x Passenger-side (right) tail light assembly • Note: Bulbs are NOT included Why Shop With Us When your livelihood depends on keeping a fleet truck moving, you need parts that ship fast, fit first try, and won't leave you dealing with a return nightmare three weeks down the road. We stock this tail light set and ship promptly to minimize the amount of time your Silverado or Sierra sits in the driveway. Our product listings are built around verified fitment data so you order with confidence, not guesswork. Competitive pricing at $85.95 for a complete pair means you're not paying a premium for the dealer's parts counter overhead. Whether you're a private owner keeping a high-mileage workhorse on the road or a fleet manager maintaining multiple trucks, straightforward pricing, accurate compatibility details, and responsive support make the difference. Get your Silverado or Sierra looking and working like it should. Add both sides to your cart today and restore factory-correct rear lighting in under an hour.