Head Light Headlight S Witch Headlamp Driving Lamp Ram Van Grand Caravan B250

When your headlights flicker, refuse to turn on, or leave your daytime running lamps stuck in one position, the culprit is almost always a worn headlight switch. The Mankee OEM-style headlight switch for the Dodge Ram Van B250 and Grand Caravan is a precision-engineered direct replacement that restores full lighting control in a single, tool-friendly repair. Compatibility This Mankee headlight switch assembly is purpose-built for the Dodge Ram Van B250 and Dodge Grand Caravan. Both vehicles were produced across multiple model years and remain popular as personal daily drivers, small-business cargo haulers, tradespeople's workhorses, and light commercial fleet units. The B250 full-size van and the Grand Caravan minivan share comparable dash architecture in their respective generations, and this unit matches the original mounting footprint, dashboard switch pocket dimensions, and factory electrical connector configuration. If your vehicle shows intermittent headlights, parking lamp failures, unresponsive driving lamp circuits, or complete loss of headlight function, this switch is the direct-fit fix you need. Always cross-reference your VIN and existing connector style before ordering to confirm compatibility with your specific production year. Key Benefits • Plug-and-play installation: the connector pinout matches the factory harness exactly — no wire splicing, no relay hacks, no electrical tape workarounds required • Restores complete headlight, parking lamp, and driving lamp switch functionality in one straightforward repair rather than chasing multiple components • Eliminates the safety hazard of flickering, intermittent, or completely inoperative headlights on night drives and in poor-weather conditions • Compact form factor drops directly into the original dashboard switch pocket with no trimming or bracket modifications needed • Durable ABS plastic housing resists dashboard heat cycling and UV degradation over years of service • Rated for continuous 12V DC automotive switching loads so the internal contacts hold up under real daily-driving conditions Technical Specifications • Operating voltage: 12V DC automotive electrical system • Housing material: high-impact ABS plastic • Connector type: OEM-matched factory plug, plug-and-play fitment • Switch functions controlled: headlights, parking lamps, driving lamps • Mounting style: direct drop-in to OEM dashboard switch pocket • Contact rating: continuous automotive-duty switching load • Temperature range: rated for underdash heat cycling environments • Dimensions: matches original OEM switch footprint (verify against your existing unit) Materials and Build Quality The Mankee headlight switch housing is constructed from high-impact ABS (acrylonitrile butadiene styrene) plastic — the same class of engineering polymer used in original-equipment interior switch assemblies across the automotive industry. ABS plastic is chosen for this application because it combines rigidity with impact resistance, tolerates the elevated temperatures found behind an active dashboard, and resists the ultraviolet light that enters through the windshield and causes lesser plastics to become brittle or discolored over time. The internal electrical contacts are engineered for continuous-duty automotive 12V DC switching, meaning they are designed to handle repeated on/off cycling across years of daily use without the oxidation and contact pitting that causes the original switch to fail in the first place. The connector housing is molded to tight tolerances so it seats fully and locks securely into the factory wiring harness clip, eliminating the loose-connector micro-arcing that can cause intermittent faults even after a switch replacement. Installation Guide Replacing the headlight switch on a Dodge Ram Van B250 or Grand Caravan is a beginner-friendly repair that most owners complete in under 30 minutes with basic hand tools. Begin by disconnecting the negative battery terminal to eliminate any risk of accidental short circuits while working near the dashboard wiring. Allow a few minutes for any capacitive charge to dissipate. Next, locate the headlight switch in the instrument panel — on most B250 and Grand Caravan applications it sits in a dedicated switch pocket on the driver's side of the dash. Use a trim removal tool or a flat-blade screwdriver wrapped in tape to gently pry the switch bezel or surrounding trim panel free without scratching the dash surface. Once the trim is released, the switch assembly is typically secured by one or two mounting screws; remove these and pull the switch forward far enough to access the electrical connector on the back. Squeeze the connector locking tab and pull the harness plug straight back — do not twist or lever it, as the locking tab is the only retention mechanism. Plug the new Mankee switch into the same connector; you will feel and hear it click into the locked position. Reinsert the mounting screws, snap the trim panel back into place, reconnect the negative battery terminal, and test all headlight, parking lamp, and driving lamp positions before reassembling anything else. If all positions operate correctly, the repair is complete. What's in the Box • 1x Mankee OEM-style headlight switch assembly for Dodge Ram Van B250 / Grand Caravan Why Shop With Us We stock precision-fit replacement parts for working vans, cargo haulers, and commercial vehicles because we understand that downtime costs money. Every Mankee part we carry is selected for direct OEM compatibility — no universal adapters, no vague fitment disclaimers. Our product listings are built with the detail professional mechanics and serious DIY owners need to order with confidence. We offer fast US shipping so your van or minivan gets back on the road quickly, and our customer support team understands automotive parts, not just order numbers. Restore safe, reliable headlight control to your Dodge Ram Van B250 or Grand Caravan today. Add the Mankee headlight switch to your cart now and eliminate that dangerous lighting fault before your next drive.