For Ford Explorer Police Interceptor Utility Roof Rack Bar 2Pc Black Aluminum

Transform your Ford Explorer Police Interceptor Utility into a fully capable, gear-ready workhorse with these 2-piece black aluminum roof rack bars from Mankee. Whether you're outfitting a fleet unit for duty equipment or adding roof-mounted cargo capacity to a daily driver, these crossbars deliver the strength, clean lines, and weather-proof performance that demanding drivers expect. Compatibility: These roof rack bars are engineered specifically for the Ford Explorer Police Interceptor Utility. The Explorer Police Interceptor Utility platform — built on Ford's robust Explorer SUV architecture — has been in continuous production since the 2013 model year, with wide adoption by law enforcement agencies, government fleets, and commercial operators across the United States. The bars are designed to integrate with the factory-installed roof side rails standard on Explorer Utility trims. Always cross-reference your vehicle's specific model year and confirm that factory raised side rails are present before purchasing. If you are unsure of your rail type or spacing, measure the center-to-center span of your existing rails prior to ordering. Key Benefits: • Dedicated fit for the Ford Explorer Police Interceptor Utility keeps installation clean and professional with no unsightly gaps or improvised adapters • Black powder-coat finish blends seamlessly with stealth and standard fleet paint schemes while resisting UV fade and oxidation in outdoor storage environments • Dual-bar (2-piece) configuration maximizes load distribution across the roof, reducing stress concentration compared to single-crossbar designs • Aluminum construction keeps the roofline weight low, minimizing the impact on the Explorer's center of gravity and handling dynamics during pursuit or highway driving • Compatible with standard T-slot accessory channels, enabling straightforward addition of light bars, antenna mounts, cargo baskets, or kayak saddles without drilling • Corrosion-resistant material and hardware make these bars suitable for high-mileage fleet vehicles exposed to road salt, rain, and temperature extremes year-round Technical Specifications: • Quantity: 2 crossbar pieces per set • Material: Aircraft-grade aluminum alloy profile • Finish: Black anodized and powder-coated • Bar profile: Aerodynamic low-profile design • Mounting: Clamp-style brackets designed for factory raised side rails • Load capacity: Refer to your Ford Explorer roof load rating (typically 150–200 lbs dynamic); do not exceed vehicle OEM roof load limit • Hardware: Stainless steel fasteners included for rust resistance • Weight: Lightweight aluminum construction; exact bar weight per unit listed in product packaging Materials & Build Quality: The crossbars are fabricated from a high-strength aluminum alloy chosen for its excellent strength-to-weight ratio. Aluminum is inherently resistant to corrosion, making it a smart choice for fleet vehicles that spend extended hours parked outdoors in rain, snow, and sun. The surface receives a two-stage treatment: first an anodizing layer that hardens the aluminum oxide surface and improves adhesion, followed by a gloss-black powder coat applied electrostatically and heat-cured for a finish that resists chips, scratches, and UV degradation far better than standard spray paint. The mounting brackets are precision-formed and paired with stainless steel hardware to eliminate the galvanic corrosion that occurs when dissimilar metals meet in wet environments. Every contact surface is designed to grip factory side rails firmly without marring the painted rail finish, keeping fleet vehicles looking professional throughout their service life. Installation Guide: Installing these roof rack bars on your Ford Explorer Police Interceptor Utility is a straightforward process that requires basic hand tools and approximately 30–45 minutes. Step 1 — Gather tools: You'll need a trim panel tool or flathead screwdriver (plastic preferred), a torque wrench or ratchet with metric sockets, and a tape measure. Step 2 — Clean the rail surface: Wipe down the factory side rails with a damp cloth to remove any dirt or debris that could prevent a secure clamp seat. Step 3 — Position the bars: Determine your desired crossbar spacing. A common starting point is to position one bar approximately one-third from the front of the rail and the second bar approximately one-third from the rear, providing balanced load support. Step 4 — Attach mounting brackets: Open each clamp bracket and place it over the factory raised side rail at your chosen position. Ensure the bracket seats flush and level. Step 5 — Torque hardware: Using the supplied stainless steel fasteners, hand-tighten first, then bring to the manufacturer-specified torque using your ratchet — do not overtighten, as this can deform the rail. Step 6 — Check alignment: Sight down both bars from the rear of the vehicle to confirm they sit parallel and at equal heights. Step 7 — Load test: Apply gentle downward pressure to each bar before loading cargo to confirm all fasteners are secure. Reinstall any trim caps included in the kit to finish. What's in the Box: • 2x Black aluminum roof rack crossbars • 4x Mounting bracket assemblies (2 per bar) • Stainless steel fastener hardware pack • Installation instructions sheet Why Shop at Expedite: We stock aftermarket parts specifically chosen for North American truck, van, and fleet operators who can't afford downtime. Our warehouse partners carry verified inventory so your order ships quickly. Every product listing includes detailed vehicle fit notes so you order with confidence, not guesswork. Our customer support team understands automotive fitment and can assist with compatibility questions before and after your purchase. Order your Mankee Ford Explorer Police Interceptor Utility 2-piece black aluminum roof rack bar set today. Add the carrying capacity your mission demands — without sacrificing the professional appearance your fleet requires. Add to cart now and get your Explorer Utility outfitted and ready to work.