Headlight Assembly Compatible With Freightliner M2 2004-2013 Black Pair

Restore full forward visibility and give your Freightliner M2 a sharp, professional look with this direct-fit black headlight assembly pair. Built to replace worn, yellowed, or cracked OEM units on 2004-2013 M2 medium-duty trucks, this set delivers both form and function in a single purchase — no hunting down mismatched housings from two different suppliers. Compatibility: This headlight assembly pair is engineered to fit 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013 Freightliner M2 trucks, covering both the M2 106 and M2 112 cab variants commonly used in box truck, flatbed, utility, and commercial fleet applications. The mounting bracket positions, wiring connector configuration, and overall housing dimensions are matched to OEM specifications, meaning no drilling, cutting, or modification is required for a clean, factory-style installation. Always verify your specific build date and cab configuration against your existing assembly before ordering to confirm fit. Key Benefits: • Complete pair included — both driver-side and passenger-side assemblies ship together, eliminating the need to source units separately and ensuring a perfectly matched set for your truck. • Direct OEM-replacement fit — bolt-on design aligns with factory mounting points on 2004-2013 Freightliner M2 trucks for a straightforward swap without custom fabrication. • Blacked-out housing — the aggressive black interior housing modernizes the front-end appearance of your M2, giving it a sleeker, updated look compared to the factory chrome-style units. • UV-resistant polycarbonate lens — resists yellowing and hazing over time, maintaining clear light output and keeping the assembly looking new through years of daily commercial use. • Sealed housing construction — the weatherproof assembly keeps moisture and road debris out of the reflector bowl, protecting bulb life and preventing internal fogging. • Fleet-ready value — buying as a matched pair reduces per-unit cost and ensures uniform light output across both headlights, critical for DOT compliance and nighttime safety on job sites and highways. Technical Specs: • Fitment: 2004-2013 Freightliner M2 (M2 106, M2 112) • Quantity: 1 pair (driver side + passenger side) • Housing color: black • Lens material: polycarbonate (UV-coated) • Housing material: ABS plastic • Bulb type: compatible with standard halogen bulbs (bulbs not included — reuse OEM bulbs or source separately) • Mounting: direct bolt-on, OEM-spec bracket locations • Connector type: factory-style plug-and-play harness connector • Operating voltage: 12V DC • Meets SAE/DOT standards for road use on commercial vehicles Materials and Build Quality: The housing on this Freightliner M2 headlight assembly is constructed from impact-resistant ABS plastic, chosen for its balance of rigidity, light weight, and resistance to the vibration stresses inherent in heavy commercial truck operation. ABS does not crack under repeated thermal cycling — critical in climates where trucks run from cold overnight temperatures into heat-soaked engine compartments during long daily routes. The lens is formed from optical-grade polycarbonate with a UV-inhibiting top coat that prevents the lens surface from oxidizing and hazing, a common failure point on aging factory assemblies. The reflector bowl inside each housing is precision-engineered to project halogen light output efficiently forward, keeping the beam pattern consistent with DOT expectations. Every seam is sealed to prevent moisture ingress, protecting both the reflector finish and any bulb you install. The result is a robust, road-ready assembly that holds up to the demands of daily commercial trucking — whether your M2 runs local delivery routes, construction site access roads, or long-haul regional runs. Installation Guide: Installing this headlight assembly pair on your Freightliner M2 is a straightforward process that most experienced owner-operators or fleet mechanics can complete in under an hour with basic hand tools. Begin by disconnecting the negative battery terminal to eliminate any risk of electrical shorts during the swap. Open the hood and locate the headlight assembly mounting hardware — typically three to four bolts or screws securing each housing to the front fascia frame. Using the appropriate socket or screwdriver, remove these fasteners and carefully slide the old assembly forward and free from the vehicle. Disconnect the wiring harness connector by pressing the release tab and pulling straight back — do not yank by the wires. Transfer your existing halogen bulbs from the old housings to the new assemblies: twist the bulb retainer ring counterclockwise, remove the bulb, and install it in the new housing in reverse order. Avoid touching the bulb glass with bare fingers — use a clean cloth or gloves. Connect the wiring harness plug to the new assembly until you hear it click firmly into place. Slide the new housing into position, align it with the factory mounting holes, and reinstall all fasteners snugly — do not overtighten ABS-mounted inserts. Reconnect the battery, turn on the headlights, and verify both low beam and high beam function before closing the hood. Adjust aim if needed using the headlight adjuster screws and a wall alignment method per your truck's service manual. What's in the Box: • 1x driver-side black headlight assembly • 1x passenger-side black headlight assembly (Note: Bulbs, wiring harnesses, and installation hardware not included — reuse OEM components) Why Shop With Us: We source directly from verified suppliers and ship with full tracking so you always know where your parts are. Every order is backed by a 30-day defect warranty, and our team is ready to assist with fitment questions before and after your purchase. Estimated delivery in approximately 10 business days means your M2 is back in service quickly — minimizing downtime for your fleet or your livelihood. Don't let cracked or cloudy headlights put your Freightliner M2 out of DOT compliance or compromise your nighttime safety. Order this black headlight assembly pair today and get both sides of your M2's front lighting sorted in one shot — the right part, the right fit, shipped fast.