Dieselpumpe Heizölpumpe 40L, 155W Selbstansaugende Ölpumpe, 2800U/min Motordrehzahl Ölabsaugpumpe Selbstansaugend, 20 Kg Diesel Kraftstoff-Umfüllpumpe, Zählwerk Automatik Pumpe Für Biokraftstoff

Stop wasting time and fuel fighting slow gravity feeds or hand-crank pumps on your job site or fleet yard. The JiaYao 40L 155W Self-Priming Diesel Transfer Pump is engineered to move diesel, biodiesel blends, and heating oil fast, accurately, and reliably — every single transfer, every single day. This pump is a universal-fit solution purpose-built for commercial and agricultural fuel management. It is fully compatible with Ford F-250 Super Duty, Ford F-350 Super Duty, RAM 2500, RAM 3500, Chevrolet Silverado 2500HD, Chevrolet Silverado 3500HD, GMC Sierra 2500HD, GMC Sierra 3500HD, Ford Transit full-size cargo vans, Mercedes-Benz Sprinter cargo vans, Freightliner Cascadia class-8 semis, Kenworth T680, Peterbilt 579, and virtually any box truck or medium-duty commercial vehicle that runs on diesel. Use it to pull fuel from 55-gallon drums, IBC totes, above-ground storage tanks, or any standard bulk fuel container. Whether you manage a small landscaping fleet or a 50-unit long-haul operation, this pump is sized for real-world fleet demands. • Self-Priming Operation: No manual priming, no wasted effort. The pump draws fuel automatically on startup and delivers flow within seconds — critical when you're running a tight yard schedule. • Fast 10.6 GPM Flow Rate: At 40 liters per minute, this pump cuts refueling time significantly compared to gravity-feed or manual alternatives. More trucks fueled per hour means more trucks on the road. • Built-In Automatic Digital Flow Meter: Every liter dispensed is tracked and displayed in real time. Essential for fuel cost allocation, driver accountability logs, and accurate fleet management records — no separate meter purchase needed. • B20 Biodiesel Compatible: Engineered to handle diesel #1, diesel #2, biodiesel blends up to B20, and heating oil. One pump covers your entire fuel inventory without compatibility worries. • Standard 110V–120V AC Power: Plugs into any standard US outlet. No generator upgrades, no special wiring, no electrician required. Perfect for shop bays, fleet yards, and job sites with standard power access. • Durable 2800 RPM Motor: The 155W motor maintains consistent pump speed under load, ensuring steady flow rate whether you're pulling from a near-empty drum or a full 275-gallon IBC tote. • Motor Power: 155 Watts • Flow Rate: 40 liters per minute (approximately 10.6 US GPM) • Motor Speed: 2800 RPM • Voltage: 110V–120V AC (standard US plug, 60Hz) • Fuel Compatibility: Diesel #1, Diesel #2, Biodiesel up to B20, Heating Oil • Suction and Discharge Port Size: 1-inch NPT threaded connections • Rated Fuel Weight Capacity: 20 kg per cycle • Self-Priming: Yes — no manual priming required The JiaYao pump housing is constructed from materials selected for resistance to petroleum-based fuels, ensuring the internal seals, impeller, and motor housing maintain integrity under repeated daily use. The motor casing is designed to dissipate heat efficiently during extended pumping sessions, which is essential in fleet yard environments where multiple consecutive vehicle fills are the norm. The 1-inch NPT threaded ports are industry-standard sizing, compatible with the vast majority of commercially available fuel hoses, nozzles, and fittings already in use at most fleet facilities. The digital flow meter display is mounted in a readable position and built to withstand the vibration and splatter typical of working fuel environments. Every component in contact with fuel media is selected to resist swelling, degradation, and corrosion from diesel and biodiesel blends, giving you a pump that holds up through a full season of heavy use without seal failures or flow degradation. Installing the JiaYao diesel transfer pump is straightforward and requires no special tools or mechanical expertise. Step 1: Position the pump unit on top of or adjacent to your fuel storage container — drum, IBC tote, or above-ground tank. Step 2: Connect the suction hose to the inlet port (1-inch NPT), lowering the suction line to the bottom of the fuel container to maximize fuel extraction. Step 3: Attach your discharge hose and nozzle to the outlet port (1-inch NPT), routing it to the vehicle fuel tank or receiving container. Step 4: Ensure all NPT connections are tight and leak-free — use thread tape on all fittings if not already applied. Step 5: Plug the pump into a standard 110V–120V AC outlet. Step 6: Power the unit on. The self-priming motor will begin drawing fuel automatically within seconds. Step 7: Monitor the built-in digital flow meter display to track fuel dispensed per session. Step 8: When fueling is complete, power off the unit and disconnect the discharge nozzle before moving the hose. Always store the pump in a dry location away from ignition sources when not in use. Review all local and OSHA regulations for bulk fuel transfer before operating. • 1x JiaYao 40L 155W Self-Priming Diesel Transfer Pump with integrated digital flow meter • Suction hose assembly • Discharge hose and nozzle • Power cord (110V–120V AC plug) • User instruction sheet When you shop here, you get a product listing built on honest specifications, real compatibility information, and support you can actually reach. We stock and ship products designed for working professionals — fleet managers, owner-operators, agricultural contractors, and commercial shop owners — not weekend hobbyists. Every order ships with full tracking, and our team is available to answer pre-purchase fit and application questions before you commit. We believe in making the buying process as straightforward as using the pump itself. If your fleet is losing productive hours to slow, unreliable fuel transfers, the JiaYao 40L 155W Diesel Transfer Pump is your fix. Add it to your cart today and start moving fuel faster, smarter, and with complete accountability on every fill.