Recovery Vehicle Strobe Light Ceiling Light Red And Blue And Yellow Strobe Warning

When your crew is working roadside, on a job site, or navigating tight loading docks after dark, being seen is everything. This compact, high-output magnetic roof strobe warning light delivers the eye-catching flash patterns that keep your workers safe and your operation moving — without permanent modifications or expensive installation labor. This strobe beacon is engineered for universal fitment on any metal-roof vehicle operating on a standard DC 12V or 24V electrical system. That means it works right out of the box on a full spectrum of working vehicles including the Ford F-150, Ford Transit, Ford E-Series, RAM 2500, Chevrolet Silverado, GMC Sierra, Dodge ProMaster, Mercedes-Benz Sprinter, Freightliner M2, International MV, Kenworth T680, Isuzu NPR, and virtually any other metal-roofed pickup, van, or commercial rig. Whether you're outfitting a single tow truck or standardizing lights across a multi-unit fleet, this beacon snaps to the roof in seconds and integrates with your existing wiring. • No-drill magnetic mount attaches firmly to any metal roof surface in under 5 minutes — no hardware, no holes, no permanent modifications required • Wide 12–24V DC input range powers the beacon off any standard passenger vehicle, cargo van, or heavy-duty truck accessory circuit without an adapter • 100,000-hour rated LED lifespan delivers years of daily-duty service before replacement is ever needed, slashing long-term maintenance costs • Available in four distinct color configurations — red/blue combo, yellow shell with amber light, blue shell with blue light, and red shell with red light — so you can match local regulations or fleet color codes • Compact 300 × 160 × 70 mm (approx. 11.8" × 6.3" × 2.75") footprint clears low-clearance garages and overhead doors without adjustments • Integrated cable routes cleanly through the door frame to your accessory circuit, keeping the install tidy and professional • Dimensions: 300 mm (L) × 160 mm (W) × 70 mm (H) — approximately 11.8" × 6.3" × 2.75" • Input Voltage: DC 12V – 24V (compatible with standard and heavy-duty vehicle circuits) • LED Rated Lifespan: 100,000 hours • Mount Type: High-strength permanent magnet (no drilling required) • Available Color Configs: Red+Blue, Yellow Shell/Yellow Light, Blue Shell/Blue Light, Red Shell/Red Light • Compatibility: Universal — any metal-roof vehicle on DC 12–24V • Install Time: Under 5 minutes • Suitable Applications: Tow trucks, recovery vehicles, cargo vans, box trucks, pickups, commercial fleets The housing is constructed from impact-resistant ABS plastic that shrugs off vibration, road grime, and temperature swings without cracking or fading. The lens material is engineered to maximize light transmission while diffusing the beam evenly across a wide angle, so the warning pattern is visible from multiple directions simultaneously. The integrated high-strength magnet is rated to maintain a firm hold at highway speeds, eliminating the rattle and shift you get with lower-quality budget beacons. Internal components are shielded against voltage spikes common in heavy-duty truck electrical systems, which protects the LED array and extends service life well beyond that of comparable strobe units. The cable is jacketed in a flexible, abrasion-resistant sheath that resists damage even when repeatedly routed through a door frame. Every material choice in this beacon reflects the demands of commercial working environments where downtime is not an option. Installing this strobe beacon takes fewer than five minutes and requires zero tools. Start by selecting your mounting location on the vehicle roof — center-rear for maximum all-around visibility is recommended for most tow trucks and vans. Wipe the roof surface clean with a dry cloth to ensure the magnet seats flush. Press the base of the beacon firmly onto the roof; the magnet will lock on immediately. Next, route the power cable along the edge of the roof, down the A-pillar or door jamb, and feed it through the door seal or weather stripping — no gaps large enough to cause seal damage are needed. Connect the cable's leads to a switched 12V or 24V accessory circuit inside the cab; the positive lead goes to your accessory fuse tap or switch, and the negative to a clean chassis ground. Flip your accessory switch and confirm the strobe pattern activates. That's it — the entire process from unboxing to operational takes under five minutes on most vehicles, including the Ford F-150, Sprinter, Freightliner M2, and Isuzu NPR. • 1× Magnetic roof LED strobe warning light beacon • 1× Integrated power cable with leads • 1× Basic installation guide Expedite Truck Parts is your direct-to-door source for professional-grade lighting, accessories, and components for pickups, vans, and commercial fleets across the United States. We stock parts built for real working conditions — not showroom shelves — and we back every order with responsive US-based customer support. Our warehouse ships fast so your downtime stays short. When you need a part that performs on the road, not just in a product photo, Expedite delivers. Don't let poor visibility put your crew at risk another day. Add this magnetic roof strobe warning light to your cart now, choose your color configuration, and have it mounted and flashing before your next shift. Stock is limited — order today and keep your fleet seen and safe.