Truck Universal Wheel Hub Cover, 2 Front Wheels -height 130mm,4 Rear Wheels -height 230mm, Including Tools

Keep your rig looking sharp and your hub hardware protected with this complete 6-piece commercial truck wheel hub cover kit — purpose-built for Class 6–8 semi trucks, box trucks, and heavy-duty commercial fleets running standard North American axle dimensions. Compatibility This universal hub cover set is engineered to fit the most common front and rear axle hub profiles across major North American OEM platforms. Front covers are sized at 130mm height to match standard steer axle hub openings, while the four rear covers measure 230mm to accommodate typical dual-rear-wheel drive axle configurations. Confirmed compatible vehicles include Freightliner Cascadia (all generations), Kenworth T680 and T880, Peterbilt 579 and 389, Mack Anthem and Pinnacle, Volvo VNL series, International LT and ProStar, and Western Star 5700XE. Most other Class 6, 7, and 8 trucks running standard North American hub dimensions are also supported. Before ordering, measure your front hub opening height (approximately 130mm) and rear hub opening height (approximately 230mm) to confirm fitment. This kit is not designed for light-duty pickup trucks, passenger vehicles, or non-standard specialty axles. Key Benefits • Full six-position coverage in one purchase — two front steer axle covers plus four rear dual-axle covers means one kit handles your entire truck with nothing left exposed. • Universal OEM-brand compatibility across Freightliner, Kenworth, Peterbilt, Mack, Volvo, International, and Western Star platforms keeps fleet managers from stocking multiple SKUs. • Shields hub nuts, wheel studs, and bearing caps from road salt, mud spray, standing water, UV radiation, and chemical corrosion — common causes of costly hub hardware degradation on over-the-road trucks. • Delivers a clean, professional fleet appearance that projects maintenance pride, reinforces brand image, and satisfies DOT roadside presentation standards. • Installation tools included in the box — no specialty shop, no separate hardware purchase required to complete the full install. • Precise sizing at 130mm front and 230mm rear ensures proper clearance and positive retention without interference with wheel rotation or brake components. Technical Specifications • Kit Contents: 6 total hub covers (2 front + 4 rear) • Front Cover Hub Height: 130mm • Rear Cover Hub Height: 230mm • Vehicle Class: Class 6, 7, and 8 commercial trucks • Axle Positions Covered: Front steer axle (2 hubs) + rear drive axle dual configuration (4 hubs) • Fitment Type: Universal — fits standard North American commercial hub profiles • Hardware Included: Yes — installation tools provided • Application: Semi trucks, box trucks, heavy-duty commercial fleet vehicles Materials & Build Quality These hub covers are constructed from heavy-grade materials selected specifically for the punishment of over-the-road commercial trucking. The finish is designed to resist road film, diesel exhaust residue, winter road salts, and pressure-wash cycles common in fleet maintenance routines. The structural integrity of the cover body ensures it maintains shape and retention even under the thermal cycling experienced between cold overnight parking and hot running hub temperatures during long-haul operations. The retention system is engineered to grip securely around hub hardware without requiring adhesives or drilling, making removal for routine hub inspections straightforward. The polished exterior finish resists oxidation and UV-induced fading far better than bare metal or uncoated plastic alternatives, keeping your fleet looking professional mile after mile. Whether you're operating a single owner-operator rig or managing a regional fleet of box trucks, the durability profile of this kit is built to reduce replacement frequency and lower total cost of ownership over time. Installation Guide Installing this hub cover kit requires no special mechanical training and can be completed at the truck stop, terminal, or in a standard shop bay using the included tools. Begin by ensuring the truck is parked on a level surface with the parking brake fully engaged. Visually inspect each hub to confirm there is no existing hardware damage, protruding studs, or irregular debris that might interfere with cover seating. Clean the hub face and outer ring with a shop rag to remove grease, mud, or road film — a clean contact surface ensures maximum retention and a flush finish. For front steer axle positions, align the 130mm front hub covers over the hub opening and apply firm, even pressure until the cover seats fully with a positive click or snug fit. For rear drive axle positions, use the same method with the 230mm rear covers, working around dual-wheel configurations to confirm the cover clears all lug hardware properly. Use the included installation tools to assist with seating on covers that require additional force due to tight hub tolerances. Step back and visually inspect all six positions before pulling the truck back into service. The full install for an experienced driver or shop technician typically takes under 30 minutes for all six positions. No torque tools, drilling, or adhesives are required. What's in the Box • 2x Front axle hub covers (130mm height) • 4x Rear dual-axle hub covers (230mm height) • Installation tool set Why Shop with Us We specialize in hard-working commercial vehicle parts for owner-operators, fleet managers, and independent shops across the United States. Every product we stock is selected for real-world fitment accuracy, durability on US roads, and value for professional buyers who can't afford downtime or returns. We process orders fast, ship with reliable carriers, and stand behind the products in our catalog with responsive customer support. Order Today Give your truck's wheels the clean, protected finish they deserve. Add this 6-piece semi truck wheel hub cover kit to your cart now and have all six positions covered — front and rear — with one no-hassle purchase.