VEVOR Truck Rack, 46-71inch Extendable Truck Ladder Rack, 800 Lbs Capacity Steel Ladder Rack For Truck With Non-Drilling J-bolts, Heavy Duty Truck Bed Rack For Kayak, Surfboard, Lumber, Ladder

Stop burning time on extra job-site runs. The VEVOR 46–71" Extendable Steel Truck Bed Rack gives contractors, weekend adventurers, and fleet operators a rated 800-pound overhead platform that clamps to your truck in under 30 minutes — zero drill holes required. Compatibility The telescoping crossbar system spans from 46 inches to 71 inches, matching the stake-pocket and bed-rail spacing found on virtually every popular full-size and mid-size pickup sold in the United States today. Confirmed fits include the Ford F-150, Ford F-250 and F-350 Super Duty, Chevrolet Silverado 1500, 2500HD, and 3500HD, GMC Sierra 1500 and 2500HD, RAM 1500, RAM 2500, RAM 3500, Toyota Tacoma, Toyota Tundra, Nissan Frontier, Nissan Titan, and Honda Ridgeline. Because the uprights clamp to your existing bed rail or stake pockets using the proprietary J-bolt system rather than welded mounts or permanent fasteners, you can pull the entire rack off one truck and bolt it onto another in minutes. Fleet managers running multiple pickup trucks across a crew will appreciate the ability to rotate one rack between vehicles based on the day's hauling needs. Key Benefits • 800-Pound Rated Static Load: Haul full-length dimensional lumber, heavy extension ladders, aluminum conduit, bundled pipe, kayaks, canoes, paddleboards, or surfboards without worrying about sag, flex, or rack failure at highway speeds. • No-Drill Installation: The J-bolt clamping system bites firmly into the bed rail without punching a single hole, keeping your factory warranty intact and protecting resale value on a late-model truck. • Adjustable 46–71" Width: One rack covers short-bed, standard-bed, and long-bed pickup configurations — no measuring tape shopping required. • Fast Transfer Between Trucks: Ideal for fleet operators and rental operations; remove and reinstall using basic hand tools in under 30 minutes. • Versatile Cargo Hauling: Purpose-built for ladders and lumber, but equally capable of securing kayaks, canoes, roofing materials, irrigation pipe, and oversized sporting goods. • Black Powder-Coat Finish: Resists rust, UV fade, and job-site abrasion season after season. Technical Specifications • Width Adjustment Range: 46 inches (minimum) to 71 inches (maximum) • Rated Static Load Capacity: 800 lbs (363 kg) • Primary Frame Material: Heavy-gauge steel • Surface Finish: Black powder-coat • Mounting Method: No-drill J-bolt bed rail clamp system • Installation Time: Approximately 30 minutes with basic hand tools • Compatible Bed Types: Standard rail and stake-pocket beds on full-size and mid-size pickups • Package Contents: 2 upright crossbar assemblies, telescoping horizontal bars, J-bolt hardware kit, mounting knobs, and instruction sheet Materials and Build Quality The VEVOR truck bed rack is fabricated from heavy-gauge steel tubing throughout — no aluminum cost-cutting, no plastic load-bearing components. The steel frame is treated with a multi-stage black powder-coat finish that bonds at the molecular level for superior adhesion compared to standard spray paint. That finish resists surface rust triggered by road salt, morning dew, and pressure-washing better than bare or painted steel alternatives. Welded gussets at the crossbar-to-upright joints distribute dynamic load forces evenly, preventing stress concentration points that cause cheaper racks to crack under heavy payloads. The J-bolt hardware is machined from zinc-plated steel for corrosion resistance, and the large-diameter knobs provide enough mechanical advantage to achieve a secure clamp torque without a torque wrench. Every component is selected for long-haul commercial use, not occasional weekend duty. Installation Guide Installing the VEVOR extendable truck ladder rack requires no special tools and no trip to a body shop. Start by unpacking and identifying both upright crossbar assemblies, the telescoping horizontal bars, and the J-bolt hardware. Step one: position the first upright assembly over the driver-side bed rail approximately 12 inches from the cab, and slide the J-bolts down behind the rail lip. Step two: repeat on the passenger side, ensuring both uprights sit level. Step three: thread the knobs onto the J-bolt threads and finger-tighten until snug. Step four: insert the telescoping horizontal bars into both uprights and expand them until they span the full interior width of your bed rail — the integrated scale markings make width-setting repeatable. Step five: tighten the horizontal bar locking bolts with the included wrench. Step six: final-torque all J-bolt knobs firmly against the underside of the bed rail. Load test with a light cargo item before committing to full-weight payloads. Total elapsed time for an experienced user is 15–20 minutes; first-time installers should budget 30 minutes. No drilling, no welding, no permanent modification. What's in the Box • 2× Steel upright crossbar assemblies (powder-coated black) • 2× Telescoping horizontal crossbars with locking collars • 4× J-bolt clamps with zinc-plated hardware • 4× Large-diameter tightening knobs • 1× Hex wrench / installation tool • 1× Illustrated installation instruction sheet Why Shop With Expedite We stock VEVOR truck bed racks in our US warehouse network so you're not waiting weeks for international freight. Orders placed before the daily cutoff ship the same business day, and most continental US customers receive delivery within 2–5 business days. Our product team has pre-verified fitment data across major pickup platforms so you can order with confidence. If a sizing issue arises, our US-based support team handles exchanges and returns without the runaround. We stand behind every rack we sell. Ready to haul smarter on every job and every adventure? Add the VEVOR 800-lb Extendable Steel Truck Ladder Rack to your cart today and put your truck to work the way it was built to.