Truck Bed Roll Bar, Universal Adjustable Sport Bar Chase Rack Compatible With Full-Size & Mid-Size Pickup, With LED Brake Light, Stainless Steel + Carbon Steel No Rack Included

If your pickup works as hard as you do, your gear should keep up. The Vevor Universal Adjustable Truck Bed Roll Bar Chase Rack delivers a factory-clean look, a rock-solid mounting platform, and a plug-and-play LED brake light — all in one bolt-on package designed for serious truck owners who refuse to compromise. Compatibility is where this sport bar separates itself from every single-model rack on the market. The adjustable crossbar and uprights expand to accommodate virtually any 5.5 ft, 6.5 ft, or 8 ft pickup bed you throw at it. Running a Ford F-150? Covered. RAM 1500 or RAM 2500 work truck? Covered. Chevy Silverado 1500 or GMC Sierra 1500 daily driver? No problem. Toyota Tundra hauling gear to the job site? Fits. Mid-size fleet operators with Toyota Tacoma, Chevy Colorado, Ford Ranger, or Nissan Frontier units? Every one of them is in spec. Before ordering, measure your inner bed rail width to confirm the bar will lock into its optimal position — the uprights slide and clamp, then lock permanently once you dial in your exact fit. • Integrated LED Brake Light: A high-intensity LED strip is built directly into the top crossbar, functioning as a highly visible third brake light. 12V DC plug-and-play wiring means no splicing and no guesswork — connect to your existing brake light circuit in minutes. • Adjustable Width System: Sliding uprights expand and lock to match 5.5 ft, 6.5 ft, and 8 ft bed widths. No model-specific hardware required in most applications — one bar fits a full fleet of mixed vehicles. • Heavy-Duty Load Platform: The rigid crossbar is engineered to handle light bars, antenna mounts, whip lights, CB antennas, and flag poles — giving off-road and work-truck builds a centralized, vibration-dampened mounting point. • Polished Stainless Exterior: The uprights and outer surfaces are finished in polished stainless steel that resists rust, road salt, and UV degradation without requiring wax or sealant every season. • Dual Mounting Options: Clamp-over-bedrail brackets and stake-pocket compatible hardware are both included, giving you flexibility based on your bed liner setup or existing accessories. • Improved Rear Visibility: The integrated LED brake light strip enhances rear-end conspicuity, reducing tailgating risk and improving safety during towing, off-road trailing, and night hauls. • Material: Polished 304 stainless steel uprights; carbon steel internal crossbar frame with black powder-coat finish • LED Strip Voltage: 12V DC, compatible with all standard automotive electrical systems • Wiring Connector: Standard 2-pin and 3-pin wiring harness included for direct brake light circuit integration • Adjustable Width Range: Expands to fit bed inner widths across 5.5 ft, 6.5 ft, and 8 ft configurations (consult vehicle spec sheet for exact inner rail measurement) • Surface Finish: Mirror-polished stainless steel exterior; textured black powder-coat on carbon steel sections for corrosion resistance • Mounting Compatibility: Clamp-over-bedrail OR stake-pocket bracket styles, hardware included for both methods • Height Profile: Sport bar height is optimized to maintain rear sightlines while providing adequate clearance for light bar and accessory mounting above the cab roof line • Weight Capacity: Rigid crossbar engineered for accessory mounting loads including LED light bars and antenna arrays (consult product spec sheet for dynamic load rating) The Vevor truck bed roll bar is built to handle punishment without looking like it has. The uprights are constructed from 304 stainless steel — the same grade used in marine hardware — delivering genuine corrosion resistance against road salt, rain, and humidity that plagues truck beds year-round in states like Michigan, Ohio, and the Pacific Northwest. The internal crossbar frame is fabricated from carbon steel and finished with a textured black powder-coat that bonds at the molecular level, resisting chips, scratches, and UV fade across multiple seasons. Where the two materials meet, Vevor has engineered the joint to minimize galvanic interaction, protecting the structural integrity of the connection points over the long term. The result is a sport bar that looks showroom-polished after three winters of hard use — not a rust-streaked liability sitting in your truck bed. Installation is straightforward and achievable in a single afternoon with basic hand tools. Begin by measuring your truck's inner bed rail width from rail to rail to determine your target adjustment setting. Loosen the upright locking hardware and expand or contract the crossbar assembly until the uprights align with your stake pockets or preferred clamp positions on the bed rails. Slide the stake-pocket inserts into position (or position the clamp-over-rail brackets), then snug all fasteners by hand before doing a final alignment check — confirm the bar sits level and centered before torquing bolts to spec. Once the frame is mechanically secured, route the LED wiring harness from the crossbar down the upright and along the bed rail toward the taillight assembly. Connect the included 2-pin or 3-pin harness to your existing brake light circuit — most late-model F-150, Silverado, RAM, Tundra, and Tacoma wiring is accessible at the taillight housing without removing interior trim. Tape and loom any exposed wiring runs, zip-tie along existing harness routes, and perform a function test before closing the tailgate. Total install time for most experienced DIYers is 60 to 90 minutes. • 1x Adjustable stainless steel and carbon steel sport bar / chase rack crossbar assembly • 1x Integrated LED brake light strip (pre-installed in crossbar) • 1x Wiring harness (2-pin and 3-pin connectors) • 1x Set of clamp-over-bedrail mounting brackets with hardware • 1x Set of stake-pocket mounting inserts with hardware • 1x Installation guide When you order from Expedite, you get more than a part — you get a streamlined buying experience built for truck owners who can't afford downtime. Our product listings are verified for fitment accuracy, and our customer support team understands pickup truck applications. Orders are processed fast, shipping is tracked from warehouse to your driveway, and our returns process is no-hassle. We stock accessories for working trucks, not just show trucks. Order the Vevor Universal Truck Bed Roll Bar Chase Rack today and give your F-150, Silverado, RAM, Tacoma, or Ranger the functional upgrade it deserves. Add to cart now — and take your truck build one step further.