Van Roof Ladder Rack, 2 Bars, 331 LBS Capacity, 52\"-63.8\" Adjustable Steel Roof Rack Cross Bar With Ladder Stoppers, Fit Vans With Rain Gutters, For Kayak Canoe Lumber Pipe Cargo,, White

Stop cramming your van's interior with ladders, lumber, and long pipe runs. The Vevor Van Roof Ladder Rack puts 331 pounds of overhead capacity to work so your cargo floor stays clear, your crew rides safely, and your tools arrive job-ready. Compatibility This roof rack system is purpose-built for cargo vans equipped with traditional rain gutters — the raised channel that runs along the roofline on classic commercial vans. Confirmed compatible platforms include the Ford Econoline E-Series (E-150, E-250, E-350), Chevrolet Express 1500, 2500, and 3500, GMC Savana 1500, 2500, and 3500, Dodge Ram Van B-Series, and Nissan NV 1500, 2500, and 3500. The two cross bars adjust continuously from 52 inches to 63.8 inches (132 cm to 162 cm) in width, accommodating the different roof profiles found across these platforms. Before ordering, measure the span between your van's rain gutter channels at the widest and narrowest points you plan to mount — this single step guarantees a confident fit. Note: this rack is not designed for vans with flush roof rails, integrated side rails, or T-slot track systems such as the Mercedes-Benz Sprinter or Ford Transit in their standard configurations. Key Benefits • 331 LB (150 KG) rated load capacity handles heavy lumber bundles, steel conduit, copper pipe, extension ladders, kayaks, canoes, and bundled job-site materials without flex or sag. • Integrated ladder stoppers create a positive front stop for ladders and long boards, preventing dangerous forward shift during hard braking or aggressive acceleration — a critical safety feature for highway driving. • No-drill rain gutter clamps grip factory gutter channels firmly and securely, leaving zero permanent marks on your van's body — essential for fleet vehicles, leased units, and resale value protection. • Fully adjustable cross bar width from 52" to 63.8" means one rack fits multiple van models in a mixed fleet without buying platform-specific hardware. • White powder-coat finish resists rust, UV fade, and road grime while maintaining a clean, professional appearance that reflects your brand on the job site. • Two-bar system spreads load weight evenly across both gutter channels, reducing point stress on the roofline and maximizing cargo stability at highway speed. Technical Specifications • Load Capacity: 331 LBS (150 KG) evenly distributed across both bars • Cross Bar Adjustable Width: 52" – 63.8" (132 cm – 162 cm) • Number of Cross Bars: 2 • Primary Material: Heavy-gauge steel construction • Finish: White powder coat • Mounting Method: Rain gutter clamps — no drilling required • Compatible Roof Type: Rain gutter vans only (raised lip channel) • Included Accessories: Integrated ladder stoppers on each cross bar Materials & Build Quality The Vevor Van Roof Ladder Rack is fabricated from heavy-gauge steel tubing designed to withstand daily commercial use, road vibration, and exposure to weather without compromising structural integrity. Each cross bar is formed to maintain consistent wall thickness throughout the span, ensuring the rated 331-pound capacity is achievable across the full 63.8-inch extended width — not just at the center point. The white powder-coat finish is applied electrostatically and then heat-cured, bonding directly to the steel substrate to create a barrier against oxidation, UV degradation, and chemical exposure from road salt and cleaning solvents. The rain gutter clamps are machined from robust metal hardware with tightening bolts that allow precise torque application — you are not relying on plastic clips or friction-only contact. Ladder stopper brackets are integrated into the cross bar profile rather than bolted on as afterthoughts, maintaining full structural continuity under dynamic load forces experienced during braking events. Installation Guide Installing the Vevor roof ladder rack requires no special tools beyond a wrench or socket set and takes approximately 30 to 45 minutes for a first-time installer. Step 1: Open the package and identify both cross bars, the rain gutter clamp assemblies, and all hardware. Step 2: Measure your van's rain gutter channel and mark the desired front and rear bar positions — a typical spread of 36 to 48 inches between bars provides the best load distribution for long cargo. Step 3: Set the cross bar width to match your van's gutter span by loosening the center adjustment bolts, sliding the bar sections to the correct width, then re-tightening firmly. Step 4: Position the rain gutter clamp over the gutter lip on one side, ensuring the clamp jaw seats fully into the channel. Step 5: Repeat on the opposite gutter. Step 6: Torque all clamp bolts evenly — alternating side to side — until the bar sits level and does not move when pushed firmly. Step 7: Repeat the process for the second cross bar. Step 8: Verify both bars are parallel and square to the roofline, then load-test with moderate weight before highway use. Always re-check clamp torque after the first 50 miles of use as hardware can seat slightly under initial load. What's in the Box • 2 x Adjustable steel cross bars with integrated ladder stoppers • Rain gutter clamp assemblies (one set per bar end) • All mounting hardware and fasteners • Installation instructions Why Shop Expedite When your livelihood depends on getting to the job site with every piece of equipment secure and accounted for, you need a supplier that ships fast, stands behind their products, and answers the phone. We stock commercial van cargo solutions specifically for tradespeople, fleet managers, and outdoor professionals across the US, so your order ships promptly and arrives ready to install. Every product in our catalog is vetted for accurate fitment data and honest load ratings — no inflated numbers, no fine-print surprises. Add the Vevor 331 LB Van Roof Ladder Rack to your cart today and turn your van's roofline into a serious cargo-hauling asset. Check fitment against your rain gutter measurements, complete checkout in under two minutes, and get back to work.