Tri-Fold 5.8FT Truck Bed Tonneau Cover For 07-13 Chevy Silverado GMC Sierra 1500--A86313-20301M3220502YF

Stop letting weather, theft, and aerodynamic drag work against you. The Mankee Tri-Fold Tonneau Cover for the 2007-2013 Chevrolet Silverado 1500 and GMC Sierra 1500 is engineered to protect your cargo, clean up your truck's profile, and give you fast, effortless bed access every single day. Compatibility This tonneau cover is precision-engineered for the 2007, 2008, 2009, 2010, 2011, 2012, and 2013 model-year Chevrolet Silverado 1500 and GMC Sierra 1500 equipped with the standard 5.8-foot bed (approximately 69.9 inches from bulkhead to tailgate interior). It is NOT compatible with the 6.5ft or 8ft bed options, nor will it fit the Silverado 2500/3500 or Sierra 2500/3500 heavy-duty platforms. Before ordering, measure from the inside of the bulkhead to the inside face of the tailgate. This cover works with trucks with or without factory bed rails, and installation requires zero drilling into your bed or bed rail — your truck stays completely stock. Key Benefits • Tri-fold design delivers instant, tool-free full-bed access — simply unsnap and fold the panels forward in seconds, then lock the cover open when hauling oversized loads. • Low-profile, flush-mount profile reduces aerodynamic drag compared to an open bed, contributing to improved highway fuel economy without changing your truck's clean factory silhouette. • Weather-resistant outer skin paired with a compression-fitted perimeter seal blocks rain, snow, UV rays, and road grime from reaching your cargo in any condition. • Integrated rear locking latch secures the cover at the tailgate, deterring casual theft and preventing wind lift at highway speeds. • Folded-forward position lets you carry tall or full-bed loads while the front panel still shields gear packed near the cab. • No-drill, clamp-on mounting system protects your bed rail finish and makes removal straightforward if you need to haul a full open bed load. Technical Specs • Bed Fit: 5.8ft / 69.9-inch standard bed (Silverado & Sierra 1500, 2007-2013) • Fold Style: Tri-fold (3-panel) • Profile Height: Low-profile flush-mount design • Closure System: Integrated rear latch with secondary side-seal retention • Mounting Type: No-drill clamp-on rail hardware • Compatibility: Trucks with or without factory bed rails • Incompatible Beds: 6.5ft, 8ft, Silverado/Sierra 2500/3500 HD • Panel Count: 3 equal panels folding toward the cab Materials & Build Quality The Mankee tonneau cover is built with a durable, UV-stabilized outer skin stretched tightly over a rigid internal frame — a construction approach that resists sagging, fading, and surface cracking through years of sun exposure and temperature swings. The perimeter seal is crafted from a compression-resistant weatherstrip material that maintains its shape and sealing ability after repeated open-and-close cycles in both freezing winter temperatures and summer heat. The folding hinges are engineered for high-cycle durability, staying tight and aligned even after thousands of open and close operations. The rear latch mechanism is built from corrosion-resistant hardware to hold firm against rain, road salt, and humidity. Every panel edge is finished cleanly so there are no sharp burrs or rough spots to snag hands or gear. The result is a cover that looks and performs like a premium accessory from day one through years of hard daily use. Installation Guide Installing the Mankee tri-fold tonneau cover is a straightforward process that most owners complete in 20-30 minutes with no drilling required. Begin by thoroughly cleaning your bed rail surface to remove dust, grease, or wax that could affect clamp seating. Lay the cover in the truck bed with the rear latch panel aligned to the tailgate and the folding panels facing toward the cab. Slide the provided clamp brackets under the bed rail at the designated attachment points — typically two per side, positioned near the front and rear of the cover. Hand-tighten the mounting hardware until the cover sits flat and centered, then use a wrench to bring each clamp to a firm, secure torque — do not overtighten, as this can distort the rail seal. Once mounted, close the cover and verify the rear latch engages cleanly. Press down along all edges to confirm the perimeter seal makes full contact. If any panel gaps appear, adjust the clamp positions slightly before final tightening. No bed rail modifications or permanent alterations are required at any step. What's in the Box • 1x Tri-fold tonneau cover (3-panel assembly) • Mounting clamp hardware set (no drilling required) • Rear latch mechanism (pre-installed) • Perimeter weatherstrip seal (pre-installed) • Installation instruction sheet Why Shop with Expedite At Expedite, we hand-select products engineered to the specific fitment requirements of US trucks and commercial vehicles. Every listing goes through compatibility verification so you receive the exact part your vehicle needs — no guesswork, no wasted returns. Our customer support team understands automotive fitment and is available to help confirm your bed length, walk through installation questions, or assist with any concern after delivery. We back every sale with a clear returns process and responsive communication from order placement to your driveway. Ready to protect your cargo and sharpen your Silverado or Sierra's profile? Add the Mankee Tri-Fold Tonneau Cover to your cart today and enjoy fast shipping to your door.