4-Fold 6.5FT Bed Tonneau Cover For 2007-13 Chevy Silverado GMC Sierra 1500 2500--A86315-2020M32206YS

Upgrade your hauler with a bed cover built for real work — the Mankee 4-Fold 6.5FT Tonneau Cover is engineered specifically for 2007-2013 Chevrolet Silverado and GMC Sierra 1500 and 2500 trucks. It delivers professional-grade cargo protection, a sleek aerodynamic profile, and no-drill installation that keeps your truck's bed rails completely intact. COMPATIBILITY This tonneau cover is precision-fitted for the 6.5-foot (78-inch) standard bed found on the following model years and trims: 2007, 2008, 2009, 2010, 2011, 2012, and 2013 Chevrolet Silverado 1500, Chevrolet Silverado 2500, GMC Sierra 1500, and GMC Sierra 2500 pickups. Before placing your order, measure your bed length from the inside of the bulkhead wall to the inside of the tailgate — you should get approximately 78 inches. This cover does not fit the 5.8FT short bed or the 8FT long bed configuration. It is compatible with thin spray-in bed liners and most drop-in liners that do not significantly raise the bed rail height. Trucks with factory-installed stake pockets covered by non-standard accessories should verify clamp clearance before ordering. KEY BENEFITS • All-Weather Cargo Protection: The high-density, UV-resistant coated fabric outer panel seals out rain, road grime, UV degradation, and debris — keeping everything in your bed dry and secure whether you're parked on a job site or pushing highway miles. • Quad-Fold Flexibility: Four independent panels fold forward in segments toward the cab, giving you partial or complete bed access in seconds without any tools. Load full 4x8 plywood sheets, a dirt bike, or bulk supplies with the cover neatly stacked near the cab window. • Improved Fuel Economy: The low-profile aerodynamic design reduces turbulent airflow over the open bed, improving fuel efficiency versus driving with no cover — a real-world benefit on long commutes and highway hauls. • No-Drill Installation: Clamp-on mounting hardware attaches directly to the bed rail without drilling, welding, or permanent modification. Your truck stays factory-fresh and resale value is protected. • Secure Tailgate Lock Compatibility: The cover works with your factory tailgate lock, adding a second layer of security to keep your gear away from prying eyes and hands. • Easy One-Person Operation: Lightweight panel construction means one person can fold, unfold, or remove the entire cover without assistance — critical when you're working solo on the job site. TECHNICAL SPECIFICATIONS • Fold Style: 4-panel quad-fold, folds toward the cab • Bed Fitment: 6.5FT / 78-inch standard bed • Compatible Vehicles: 2007-2013 Chevy Silverado 1500, Silverado 2500, GMC Sierra 1500, Sierra 2500 • Panel Frame: Extruded aluminum cross-bow supports for rigid panel shape • Rail System: Anodized aluminum side rails with integrated seal channel for weatherproofing • Surface Material: High-density, UV-resistant coated fabric top panel • Mounting Method: No-drill clamp-on hardware; attaches to factory bed rail • Profile Height: Low-profile design sitting flush to or just below bed rail height MATERIALS & BUILD QUALITY The Mankee tonneau cover is constructed with two primary material systems working in concert to deliver durability and weather resistance. The side rails and internal cross-bow panel supports are crafted from extruded anodized aluminum — a lightweight yet structurally rigid material that resists corrosion, warping, and oxidation across years of outdoor exposure. Anodizing adds a hard protective oxide layer directly to the aluminum surface, meaning it won't chip, peel, or rust the way painted steel alternatives eventually will. The top surface of each panel is wrapped in a high-density coated fabric that is specifically formulated to resist UV ray degradation, preventing cracking, fading, and brittleness even after years of direct sunlight. The integrated seal channel running the length of each side rail houses a compression seal that creates a weather-tight barrier against rain intrusion. The same seal technology runs across the front and rear edges of the cover, ensuring comprehensive perimeter sealing. Hardware components including clamps and latches are corrosion-resistant to match the longevity of the main frame. INSTALLATION GUIDE Installing this tonneau cover is a straightforward process that most truck owners complete in 30 to 45 minutes with basic hand tools. No drilling is required at any step. Begin by clearing your truck bed completely and cleaning the bed rail surface where the aluminum side rails will sit, removing any dirt or debris that could affect the seal. Step one: position the driver-side aluminum rail along the inside of the bed rail and align the front edge flush with the bulkhead. Step two: slide the clamp brackets into the rail channel at the marked positions — typically at the front, middle, and rear of each side. Step three: hand-tighten the clamp hardware to temporarily hold the rail in place, then repeat the process for the passenger-side rail. Step four: lay the cover panel assembly across both rails and confirm the front edge seals snugly against the cab bulkhead seal strip. Step five: torque all clamps to snug with a wrench — do not overtighten, as this can deform the rail channel. Step six: connect the tailgate seal strip across the rear opening. Step seven: test each panel fold section and confirm the latch hardware clicks into position. A second person can be helpful during rail alignment but is not required. WHAT'S IN THE BOX • 4-panel quad-fold tonneau cover assembly (pre-assembled frame and fabric) • Driver-side and passenger-side anodized aluminum side rails • No-drill clamp-on mounting hardware set • Front bulkhead seal strip • Rear tailgate seal strip • Installation instructions and hardware pack WHY SHOP WITH US We specialize in precision-fit truck accessories for working pickups across every major domestic and import platform. Every product in our catalog is vetted for accurate fitment data, and our team actively monitors customer feedback to catch and correct compatibility issues before they reach your door. We back our accessories with responsive US-based customer support — if you have a fitment question before ordering or an issue after delivery, you get a real answer fast. Our streamlined fulfillment process means your order ships promptly, and our easy returns policy removes all the risk from your purchase decision. Add the Mankee 4-Fold Tonneau Cover for your 2007-2013 Silverado or Sierra to your cart today and start protecting your cargo and improving your fuel economy on every drive.