Front & Rear Fender Flares Compatible With 2007-2017 Wrangler JK JKU, Off-Road Wheel Flares Liner 4 PCS

Stock fenders were never designed for the rocks, ruts, and red clay that serious Jeep owners actually deal with. If your 2007-2017 Wrangler JK or JKU spends any time off the pavement, this 4-piece matte black ABS fender flare kit gives your rig the aggressive coverage and body protection it deserves — without custom fabrication, without cutting plastic, and without spending weekend hours in the driveway. These fender flares are engineered exclusively for the 2007-2017 Jeep Wrangler JK platform, covering every model year from 2007 through 2017 — including 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, and 2016. The kit fits both the 2-door JK and the 4-door JKU Unlimited body. Because the entire JK generation shares the same body architecture, these flares align directly with factory bolt hole patterns on all four wheel arches. That means a precise, gap-free fitment every time — no guesswork, no adapter plates, no trips to a body shop. Whether you daily-drive on rough terrain or run dedicated trail weekends, this kit covers all four corners simultaneously for a unified, factory-quality appearance. • Complete 4-piece coverage: Two front and two rear flares replace all four wheel arch panels at once, ensuring a consistent, symmetrical stance across your entire Wrangler. • Extended wheel arch protection: The wider flare profile shields door panels, rocker moldings, and quarter panels from rocks, gravel, mud, and debris thrown up by larger off-road tires — especially important when running 33s, 35s, or larger. • OE bolt-on fitment: Factory-matched bolt hole patterns eliminate drilling, cutting, or shimming. Hardware aligns on the first attempt, dramatically reducing installation time for DIY builders. • Matte black low-gloss finish: The flat black surface doesn't show light trail scratches the way gloss finishes do, and it integrates cleanly with the Wrangler's rugged aesthetic without needing a wrap or paint match. • Versatile application: Equally at home on a rock crawler, an overlanding rig, a beach-permit Jeep, or a street-driven daily that occasionally hits fire roads. Debris protection matters in every context. • Compatible with wider tires: The extended flare lip accommodates tires beyond the OE width, helping you stay street-legal while running lifted setups with wider rubber. • Material: High-impact ABS plastic — UV-stabilized for long-term color retention • Finish: Matte black (low-gloss) • Pieces included: 4 total — 2 front, 2 rear • Fitment: 2007-2017 Jeep Wrangler JK (2-door) and JKU Unlimited (4-door) • Mounting: OE factory bolt hole pattern — hardware included • Coverage: Full front and rear wheel arch replacement • Weight: Lightweight ABS construction for minimal added mass • Compatibility: Not for use on JL or JT platform; JK/JKU only These flares are molded from high-impact ABS plastic, the same class of thermoplastic used extensively across the automotive industry for exterior trim, bumper fascias, and body cladding. ABS is chosen for exterior applications because it balances rigidity with flex tolerance — it resists cracking under trail impacts while returning to shape after light deflection. The material is UV-stabilized during manufacturing, which slows the oxidation and surface degradation that causes cheaper plastics to fade, chalk, or crack within a single season of sun exposure. The matte black surface texture is molded in, not painted over a smooth substrate, which means minor rock chips and surface abrasion blend into the flat finish rather than exposing white plastic beneath. On a working Jeep that sees gravel, brush, and trail debris regularly, that durability difference is immediately noticeable compared to glossy or painted alternatives. The structural wall thickness provides meaningful impact resistance without adding significant weight to your Wrangler's front or rear corners. Installation is a straightforward DIY project requiring only basic hand tools. Start by parking on a flat surface and gathering a trim panel removal tool, a 10mm socket or nut driver, and a clean microfiber cloth. Step 1: Remove your existing OE fender flares by locating and removing the factory retaining hardware along the wheel arch — typically 10mm bolts and push-pin clips. Work carefully around the clip positions to avoid breaking tabs in the body. Step 2: Clean the mounting surface with your microfiber cloth to remove dirt, road film, or old adhesive residue that could affect fitment. Step 3: Dry-fit each new flare against its wheel arch to confirm alignment with the factory bolt holes before installing hardware. Step 4: Install the provided hardware finger-tight first, aligning every mounting point before final torque. Step 5: Work around the flare sequentially tightening each fastener to avoid pulling the flare out of alignment. Repeat for all four flares — front left, front right, rear left, rear right. Total installation time for an experienced DIYer is typically 60 to 90 minutes for all four corners. No drilling, cutting, or professional help required. • 4x ABS fender flares (2 front, 2 rear) • Mounting hardware set • Installation reference guide When you shop at Expedite, you get more than a box dropped on your doorstep. Every product listing is verified for fitment accuracy before it goes live, so you're not guessing whether a part belongs on your specific Wrangler. Our team reviews technical specs against OE references and supplier documentation to catch fitment errors before they become your return headache. We stand behind what we sell with straightforward return support, responsive customer service, and product pages built to give you every detail you need to buy with confidence. Stop running stock fenders on a Jeep that's built for more. The 2007-2017 Jeep Wrangler JK JKU 4-piece matte black fender flare kit is in stock and ready to ship. Add it to your cart now and give your Wrangler the trail-ready protection it's been missing.