Tonneau Cover Soft Roll Up For 2009-2010 Ram 1500 Crew Cab Pickup 5.8FT Bed--A86260-1985215677

Stop letting rain, road grime, and prying eyes ruin your haul. The Mankee Soft Roll-Up Tonneau Cover is precision-engineered for the 2009-2010 RAM 1500 Crew Cab, delivering a snug, watertight fit across your 5.8-foot bed without a single modification. Compatibility & Fitment This cover is built exclusively for the 2009 and 2010 RAM 1500 Crew Cab pickup equipped with the 5.8 ft (approximately 69.4-inch) bed. It will not fit the 6.4-foot bed, the short bed, Extended Cab, or Regular Cab variants of the RAM 1500. Before ordering, measure your bed from the inside face of the bulkhead to the inside face of the tailgate. If you land at or near 69.4 inches, this cover drops on with a perfect fit — no drilling, cutting, or custom fab required. Confirm your exact cab style in your door jamb sticker or VIN decoder to avoid a return. Key Benefits • Full Bed Protection: The heavy-duty marine-grade vinyl surface forms a watertight barrier across your entire 5.8ft bed, blocking rain, morning dew, UV rays, road dust, and highway debris on every trip to the job site or trailhead. • Tool-Free Roll-Up Access: Unroll or re-roll the cover in seconds using the integrated hook-and-loop retention straps. No latches, no keys, no wrenches — just grab, roll, and go when you need the full bed open fast. • Aerodynamic Low-Profile Design: The flush-fitting construction hugs your bedrails and reduces wind drag compared to bulky hard covers or camper shells, helping preserve your fuel economy on long highway stretches. • Lockable Security Layer: When the cover is closed and your tailgate lock is engaged, the combined seal deters opportunistic theft of tools, gear, and cargo stored in the bed. • Lightweight & Durable Framework: Aircraft-grade aluminum cross-bows and side rails keep the overall weight low while providing the rigid structure needed to prevent vinyl sag and maintain a taut, professional appearance year-round. • Direct-Fit Precision: Designed to the exact OEM bed dimensions of the 2009-2010 RAM 1500 Crew Cab 5.8ft configuration, so the sealing foam gaskets contact the rail evenly around the full perimeter. Technical Specifications • Cover Type: Soft Roll-Up • Vehicle Fit: 2009-2010 RAM 1500 Crew Cab • Bed Length: 5.8 ft / approximately 69.4 inches • Surface Material: Heavy-duty marine-grade vinyl • Frame Material: Lightweight aluminum cross-bows and side rails • Seal Type: Foam perimeter gasket for watertight closure • Attachment Method: Clamp-on side rails, no drilling required • Retention: Integrated hook-and-loop roll-up straps Materials & Build Quality The Mankee tonneau cover uses a multi-layer construction built to handle real working conditions. The outer surface is a heavy-duty marine-grade vinyl chosen for its resistance to UV degradation, puncture, and surface abrasion — the same grade of material used in boat covers and outdoor upholstery that must survive years of weather exposure. Beneath the vinyl skin, the cover gains its shape and tension from a series of lightweight aluminum cross-bow bows that span the bed width at regular intervals, preventing pooling water from collecting in sags. The side rails are extruded aluminum, engineered to grip your bedrails firmly via a clamp system that leaves the bed liner and paint completely undamaged. Dense foam perimeter gaskets compress against the rails and tailgate header to create a weather-resistant seal on all four edges. The result is a cover that looks sharp, performs reliably through hot summers and wet winters, and holds up to daily work-truck use without cracking, fading, or losing its seal. Installation Guide Installing the Mankee roll-up tonneau cover on your 2009-2010 RAM 1500 Crew Cab is a straightforward process most owners complete in under 30 minutes using only a rubber mallet and a trim tool. Step 1: Clean your bedrails thoroughly with a degreaser and allow them to dry completely so the rail clamps seat flush. Step 2: Lay the rolled cover assembly across the bed and position the aluminum side rails along the inner lip of each bedrail, aligning the front edge of the rail with the front of the bed box. Step 3: Hand-tighten the clamps evenly along both rails, working from front to rear, to ensure the rails sit level and square. Step 4: Use a rubber mallet to firmly seat each clamp bracket — do not over-torque. Step 5: Unroll the vinyl cover toward the tailgate, pressing the foam seal into contact with the tailgate header. Step 6: Engage the hook-and-loop retention straps to hold the cover taut in the closed position. Step 7: Raise and lower the tailgate to confirm clearance, then test the seal by running water from a hose around the perimeter. No drilling, no wiring, no specialty tools required. What's in the Box • 1x Soft roll-up vinyl tonneau cover panel • 2x Extruded aluminum side rails with pre-installed foam seal • Aluminum cross-bow bow set (qty varies by configuration) • Clamp hardware set (front and side rail clamps) • Hook-and-loop roll-up retention straps • Installation instruction sheet Why Shop with Expedite When you order from our store, you get a product that has been vetted for fitment accuracy, backed by responsive US-based customer support, and shipped with tracking so you always know where your order is. We stock tonneau covers, bed liners, floor mats, and a full range of truck accessories tested against real-world vehicle fitment data. Our team is here to answer fitment questions before you buy, so you don't waste time on returns. We stand behind every product we sell with a clear returns process and post-purchase support. Ready to lock down your RAM 1500's bed for good? Add the Mankee Soft Roll-Up Tonneau Cover to your cart now and get watertight, secure, tool-free bed protection delivered to your door.