Soft Roll-Up Truck Bed Tonneau Cover, Compatible With 2015-2025 Ford F-150, Fits 5.6 Ft (5 Ft 7 In/67 In) Bed, Triple-Layer Heavy-Duty PVC Tonneau Cover With Three Aluminum Alloy Support Bars

Stop letting weather, prying eyes, and aerodynamic drag work against your F-150. The Vevor Soft Roll-Up Tonneau Cover is purpose-engineered for 2015-2025 Ford F-150 owners who want professional-grade bed protection without a professional-grade price tag. Rugged triple-layer PVC, three full-width aluminum alloy crossbars, and a tool-free clamp-on design make this one of the most practical upgrades you can bolt onto your truck today. Compatibility This tonneau cover is designed exclusively for the 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, and 2025 Ford F-150 equipped with the standard 5.6 ft bed (5 feet 7 inches / 67 inches measured inside the bed from bulkhead to tailgate). It fits both the SuperCab and SuperCrew cab configurations that left the factory with the 5.6 ft bed. It does NOT fit the 6.5 ft or 8 ft F-150 bed variants, and it is not compatible with the Ford F-250, F-350, or any Super Duty platform. Before ordering, measure the inside length of your bed from the inside of the tailgate to the inside of the bulkhead to confirm you have the 5.6 ft bed. Key Benefits • Instant Cargo Access: Roll the cover forward in seconds — no tools, no latches to fight — to load oversized hauls and lock back down just as fast. • All-Weather Defense: Triple-layer cross-linked PVC sheds rain, blocks UV degradation, and repels road grime so every piece of gear in your bed stays dry and clean. • Fuel Economy Gains: A flush-fitting, low-profile design cuts aerodynamic drag at highway speeds, delivering real-world mpg improvements on long hauls and daily commutes alike. • Theft Deterrence: The built-in locking mechanism at the cab end keeps the cover taut and locked, adding a meaningful barrier against opportunistic theft when you're parked. • Sleek, Low-Profile Appearance: The slim roll-up sits close to your bed rails for a clean, factory-integrated look that enhances the F-150's aggressive profile. • No-Drill Installation: Clamp-on mounting hardware grips the bed rail without a single hole drilled — your truck stays factory-original and resale value stays intact. Technical Specifications • Vehicle Fit: 2015-2025 Ford F-150 (SuperCab / SuperCrew, 5.6 ft bed only) • Bed Length: 5.6 ft / 5 ft 7 in / 67 in (inside bed measurement) • Top Panel Material: Triple-layer cross-linked PVC fabric • Support Structure: 3 aluminum alloy crossbars, full bed width • Frame/Rail Material: Aluminum alloy • Mount Type: Clamp-on, no drilling required • Locking Mechanism: Built-in cab-end lock • Color: Matte black • Brand: Vevor • Price: $189.23 Materials and Build Quality The Vevor tonneau cover's top panel is constructed from a triple-layer cross-linked PVC laminate — the same material category used in marine and heavy transport covers. The outer layer is UV-stabilized to resist fading and surface cracking even under sustained sun exposure in high-UV regions like the Southwest. The middle layer adds structural body to the fabric, preventing sag and pooling between crossbars during heavy rainfall. The inner layer provides a soft, abrasion-resistant surface that won't scratch bed rails or cargo. The three aluminum alloy crossbars are cold-formed for consistent wall thickness and span the full width of the F-150 bed, eliminating the flex and sag common in covers built with fewer or shorter bars. All hardware — clamps, hinges, and locking components — is corrosion-resistant, which matters in northern states where road salt is a seasonal reality. The result is a cover that holds its shape, holds its seal, and holds up across seasons without demanding maintenance beyond an occasional wipe-down. Installation Guide This Vevor tonneau cover installs without any drilling, cutting, or professional help. Plan for approximately 20-30 minutes the first time. Start by cleaning your bed rails thoroughly — remove any wax, dirt, or debris so the clamp pads grip properly. Lay the rolled cover along the front of the bed near the cab, unroll it toward the tailgate, and confirm the fabric orientation is correct (logo side up, cab-end latch facing forward). Slide the aluminum side rails into position along both bed rail edges. Attach the clamp-on brackets — typically spaced evenly along the rail, roughly every 12-18 inches — and hand-tighten each one to hold position. Walk the length of both sides and verify the rail is seated flush and square. Once aligned, use the included tool to fully torque each clamp bracket until snug and secure — do not overtighten and risk cracking the rail. Snap the three crossbars into their rail slots, distributing them evenly across the bed length. Finally, engage the cab-end locking mechanism, roll the cover closed, and do a tug test on each side to confirm the clamps are holding. That's it — no lift required, no shop visit needed. What's in the Box • 1x Triple-layer PVC tonneau cover top panel • 2x Aluminum alloy side rails • 3x Aluminum alloy crossbars • 1x Cab-end locking hardware assembly • Clamp-on mounting brackets (full set) • Installation hardware and fasteners • Instruction manual Why Shop With Us When you order through our storefront, you get a vetted Vevor product backed by responsive US-based customer support. We stock detailed fitment data for every F-150 bed configuration so you can buy with confidence. If the cover doesn't fit your confirmed bed size, our return process is straightforward — no runaround. We process orders quickly, ship with tracking from day one, and stand behind every product we list. Whether you're outfitting a single personal truck or sourcing covers for a small fleet of F-150 work trucks, we can handle the volume and answer the questions that matter before you commit. Ready to lock down your F-150's bed and start every workday knowing your cargo is covered? Add the Vevor Soft Roll-Up Tonneau Cover to your cart now — confirm your 5.6 ft bed length, place your order, and have it installed this weekend.