5FT Truck Tonneau Cover Soft Roll Up For 2016-2022 Toyota Tacoma Short Bed 5'--A86315-M44401S

Protect your haul, sharpen your truck's profile, and reclaim lost fuel economy — the Mankee Soft Roll-Up Tonneau Cover is purpose-engineered for the 2016-2022 Toyota Tacoma 5-foot short bed and built to outperform covers costing far more. COMPATIBILITY This tonneau cover is precision-fitted for the 3rd Generation Toyota Tacoma produced from model year 2016 through 2022, specifically trucks equipped with the 5-foot (approximately 60-inch) short bed. To confirm fitment before ordering, measure the interior bed length from the inside face of the bulkhead to the inside face of the closed tailgate; a measurement between 59 and 61 inches confirms this cover is your match. All trim levels are supported — SR, SR5, TRD Sport, TRD Off-Road, Limited, and TRD Pro — as long as no aftermarket bed-mounted toolbox or oversized bed rail accessory blocks the stake pocket area used by the mounting clamps. This cover is NOT compatible with the 6-foot long-bed Tacoma variant. When in doubt, cross-reference your VIN or door-jamb sticker for the factory bed length designation. KEY BENEFITS • Full Weatherproof Protection: The heavy-duty marine-grade vinyl top seals out rain, road debris, UV radiation, and dust accumulation, keeping tools, camping gear, groceries, and job-site equipment dry and secure on every drive, every season. • Complete Cargo Access in Seconds: The smooth roll-up design lets you access the entire truck bed without removing the cover — simply unlatch the tailgate end, roll the panel forward toward the cab, and lock it in position using the integrated hook-and-loop retention straps. • Improved Aerodynamics and Fuel Economy: Covering an open bed profile with a flush-mounted tonneau reduces aerodynamic drag at highway speeds, contributing to measurable fuel savings over time compared to driving with an uncovered bed. • Low-Profile, Clean Aesthetic: The slim, flat-fold profile sits nearly flush with the bed rails, giving your Tacoma a sleek, factory-finished appearance that looks right on a work truck and equally sharp on a weekend rig. • Clamp-On No-Drill Installation: Mounting hardware anchors directly to the bed's stake pockets and rail channels — no drilling, no permanent modification, and no voided factory warranty. • Year-Round Durability: UV-stabilized vinyl and corrosion-resistant aluminum frame components hold up against sun, salt, and temperature extremes from desert summer heat to sub-zero winter mornings. TECHNICAL SPECIFICATIONS • Cover Style: Soft Roll-Up, tri-fold compatible roll design • Fitment: 2016-2022 Toyota Tacoma 3rd Gen, 5 ft / ~60 in short bed • Outer Surface Material: Heavy-duty marine-grade vinyl, UV-stabilized • Frame Construction: Lightweight aluminum cross-bows and side rails • Mounting System: Clamp-on stake-pocket hardware, no drilling required • Bed Coverage: Full bed coverage from bulkhead to tailgate • Water Resistance: Sealed perimeter with weather-strip drainage channels • Cargo Access: 100% full bed access when rolled and secured forward MATERIALS AND BUILD QUALITY The Mankee tonneau cover's outer skin is constructed from heavy-duty marine-grade vinyl — the same category of material used in boat upholstery and marine covers, chosen specifically for its resistance to prolonged UV exposure, moisture infiltration, and temperature cycling. The vinyl is double-stitched at all seams and edges to prevent delamination and tearing under load or wind buffeting at highway speeds. Beneath the vinyl surface, a network of lightweight aluminum cross-bow supports spans the bed width, maintaining the cover's flat, taut profile without adding significant weight. The aluminum side rails and mounting clamps are finished with a corrosion-resistant coating to withstand road salt, rain, and washing cycles over years of use. All rubber seals and weather-stripping used along the perimeter and at each cross-bow juncture are EPDM-grade, maintaining flexibility in cold temperatures so the seal stays tight even on winter mornings. The result is a cover that looks premium, performs reliably, and holds its shape season after season without sagging. INSTALLATION GUIDE Installing the Mankee tonneau cover on your 2016-2022 Toyota Tacoma short bed requires no drilling and no professional help — most owners complete the process in 30 to 45 minutes with basic hand tools. Step 1: Lay out all components and hardware on a clean surface and verify everything listed in the box contents is present before starting. Step 2: Position the aluminum side rails along the inside top edge of the driver-side and passenger-side bed rails, aligning the stake-pocket clamps with the corresponding stake holes. Step 3: Hand-tighten the mounting clamps into the stake pockets to hold the rails in position, then use a socket wrench to fully torque them down — do not over-tighten. Step 4: Slide the rolled tonneau cover panel onto the side rails from the tailgate end, ensuring the front header bar seats flush against the bulkhead. Step 5: Snap or clamp the front header bar latches to lock the cover in place at the cab end. Step 6: Close the tailgate and test the rear latch mechanism to confirm a secure, weather-tight seal. Step 7: Adjust the hook-and-loop retention straps to your preferred roll position when the cover is open. No special tools or professional installation required — the hardware kit includes every bolt, clamp, and fastener needed. WHAT'S IN THE BOX • 1x Mankee soft roll-up vinyl tonneau cover panel with integrated cross-bow supports • 2x Aluminum side mounting rails (driver and passenger side) • 1x Front header bar with cab-end latch assembly • Stake-pocket mounting clamp hardware set (bolts, clamps, and seals) • Hook-and-loop roll retention straps • Full installation instruction sheet WHY SHOP WITH US We stock genuine Mankee tonneau covers with product photos, real specifications, and fitment data verified against Toyota factory bed dimensions — not a recycled listing with placeholder images. Every order ships with full item tracking, and our support team can answer fitment questions specific to your Tacoma's trim and build date. We stand behind every product we list and make returns straightforward if something is not right. Order the Mankee Soft Roll-Up Tonneau Cover today and give your 2016-2022 Toyota Tacoma the bed protection, clean look, and cargo security it deserves — at a price that leaves money in your pocket for the next upgrade.