5.7' Soft Lock & Roll Up Truck Bed Tonneau Cover For Ford F-150 Lightning--A80034-12114

Keep your Ford F-150 Lightning's cargo safe, dry, and locked down without adding bulk or complexity. The Mankee A80034 5.7-foot Soft Lock & Roll-Up Tonneau Cover delivers professional-grade weather protection, clean aerodynamics, and tool-free installation — all at a price that makes sense whether you're running job-site loads or protecting weekend gear. This cover is precision-engineered exclusively for the 2022, 2023, 2024, and 2025 Ford F-150 Lightning equipped with the standard 5.7-foot (67.1-inch / 68-inch nominal) truck bed. Ford's all-electric F-150 platform uses unique bed rail geometry that universal-fit covers cannot properly address. The Mankee A80034 accounts for those exact dimensions with custom-extruded 6061 aluminum side rails that seat flush against your Lightning's factory bed rails, eliminating the gaps, rattles, and water intrusion that plague one-size-fits-all solutions. Important: verify your bed length before ordering — this cover does not fit the frunk compartment or any alternate bed configuration. • Lock-and-roll security: The integrated dual-latch locking system at the tailgate secures your cargo against opportunistic theft. When you need full bed access, simply release the latches and roll the cover forward in seconds — no tools, no hassle. • All-season weather defense: Triple-layer marine-grade vinyl with a UV-inhibiting top coating repels rain, snow, sleet, road salt spray, and harsh sunlight, keeping your bed interior dry in any US climate from Minnesota winters to Arizona summers. • No-drill, no-damage installation: Steel T-bolt clamps grip the factory bed rail without drilling, cutting, or permanent modification. Your Lightning's resale value stays intact — remove the cover cleanly any time. • Low-profile aerodynamic profile: The slim roll-up design sits flush with the bed rails, reducing wind drag compared to high-rise hard covers and preserving your Lightning's EPA-rated efficiency numbers. • Full bed access in seconds: Roll the cover toward the cab, secure the built-in straps, and you have 100% unobstructed access to the entire 5.7-foot bed — ideal for loading tall cargo, lumber, or oversized equipment. • Quiet, rattle-free ride: Precision-fitted crossbow bows and tension-adjusted side rails keep the cover drum-tight at highway speeds, so you hear the road — not your tonneau. • Bed fit: 5.7 ft / 68 in nominal (67.1 in precise) — 2022–2025 Ford F-150 Lightning standard bed only • Cover material: Triple-layer marine-grade vinyl, 24 oz weight, UV-resistant topcoat • Frame/bow material: Aircraft-grade aluminum crossbow bows with black powder-coat finish • Side rail material: 6061-T5 aluminum extrusion, anodized black • Clamp system: Heavy-duty steel T-bolt clamps — no drilling required • Locking system: Dual-latch tailgate lock, keyed cylinder included • Rolled diameter: Approximately 6–7 inches when fully rolled toward cab • Finish: Matte black throughout — matches Lightning's factory dark trim lines The Mankee A80034 is built from materials chosen for longevity in real working environments. The 24 oz triple-layer marine-grade vinyl is the same weight class used in commercial boat covers and heavy-duty truck tarps — it resists tearing, UV degradation, and mildew accumulation even after years of outdoor exposure. The UV-inhibiting top coating prevents the chalking and cracking that afflicts cheaper single-ply covers after one or two summers. The crossbow bows are stamped from aircraft-grade aluminum alloy, then powder-coated in matte black to resist corrosion from road salt and pressure-washing. Side rails are extruded from 6061-T5 aluminum — the same alloy grade used in aerospace structural components — giving you a rigid, dimensionally stable mounting platform that won't flex or warp under load. Steel T-bolt clamps are zinc-plated to prevent rust at the contact points with your bed rails. Every component is designed to survive the abuse of daily driving, job-site hauls, and harsh US weather conditions for the long term. Installation is straightforward and typically takes 20–30 minutes with no specialty tools. Step 1: Lower your tailgate and lay the rolled cover assembly in the truck bed. Step 2: Position the extruded aluminum side rails along both sides of the bed, aligning the front edge flush with the bulkhead. Step 3: Slide the steel T-bolt clamps into the channel on each side rail and position one clamp every 12–16 inches along the rail — typically 3–4 clamps per side. Step 4: Hand-tighten the T-bolt nuts to seat the clamps against the underside of your Lightning's factory bed rails; do not overtighten yet. Step 5: Confirm the front bulkhead seal is flush and the rear tailgate seal contacts evenly across the full width. Step 6: Torque all T-bolt clamps to snug with a 3/8-inch socket or adjustable wrench — no drilling, no cutting. Step 7: Unroll the cover from cab to tailgate, engage the dual latches, and confirm the locking cylinder operates smoothly. Step 8: Adjust crossbow tension straps if needed to eliminate any looseness in the vinyl. Your cover is now installed and fully operational. • (1) Mankee A80034 roll-up vinyl cover assembly (pre-rolled on aluminum rod) • (2) extruded 6061 aluminum side rails with integrated drainage channels • (1) set of steel T-bolt clamps with zinc-plated hardware • (1) front bulkhead weatherstrip seal • (1) tailgate weatherstrip seal • (1) dual-latch lock assembly with (2) keys • (1) installation instruction sheet When you shop with Expedite, you get more than a part — you get confidence. Our product listings are vetted for fitment accuracy, and our customer support team knows trucks. We stock and ship from US-based fulfillment, so you're not waiting weeks for overseas delivery. Our straightforward return policy means if the fitment isn't right, we make it right — no runaround, no overseas support queues. We stand behind every product we list because our reputation depends on yours. Stop letting rain, UV damage, and prying eyes access your Ford F-150 Lightning's bed. The Mankee A80034 5.7ft Soft Lock & Roll-Up Tonneau Cover installs in under 30 minutes, locks down your cargo, and looks great doing it — all for $147. Add to cart today and protect your Lightning's bed the right way.