Running Boards, 6 Inches Side Steps Compatible With 2024-2025 Tacoma Double Cab, Black Carbon Steel Bars, 550 Lbs Load Capacity, Wide Non-Slip Hollow Surface With Rustproof Coating

Get in and out of your 2024-2025 Toyota Tacoma with confidence. Vevor's 6-inch black carbon steel running boards are purpose-built for the 4th Generation Tacoma Double Cab, delivering a rugged, reliable step platform that handles hard work, heavy loads, and unpredictable weather without missing a beat. Compatibility These running boards are engineered exclusively for the 2024 and 2025 Toyota Tacoma Double Cab on the 4th Generation platform. The precision-designed bracket geometry aligns directly with factory rocker panel mounting points on the Double Cab body style. Access Cab and CrewMax configurations use different rocker geometry and are not supported by this kit. Not sure which cab style you have? Count your full-size rear doors — a Double Cab has two full rear doors on each side. No cutting, drilling, or frame modification is required. The included hardware drops straight onto the OEM mounting locations for a clean, factory-correct installation. Key Benefits • 550 lb rated load capacity holds firm under the heaviest crew members, gear loads, and work-site conditions — zero flex, zero sag, every single time • Wide 6-inch step platform gives your entire boot a secure, stable surface so you're never tip-toeing on a narrow rail when you're loaded down with tools or gear • Non-slip hollow surface is designed to channel mud, water, snow, and trail debris away from the standing zone, keeping traction high in rain, sleet, and off-road use • Rustproof protective coating seals the carbon steel core against road salt, standing moisture, and UV degradation, ensuring long service life even in northern winter states • Blacked-out matte finish pairs cleanly with factory body cladding, TRD Pro molding, aftermarket lift kits, and custom wheel setups without clashing • Bolt-on installation with all hardware included means no welding, no custom fabrication, and no dealership labor fees — just straightforward, one-afternoon work Technical Specifications • Vehicle Fit: 2024-2025 Toyota Tacoma Double Cab (4th Generation only) • Step Width: 6 inches (152 mm) • Rated Load Capacity: 550 lbs (249 kg) • Primary Material: Carbon steel with rustproof protective coating • Finish: Matte black powder coat / blacked-out surface treatment • Step Surface: Wide hollow non-slip tread pattern • Mounting Type: Direct bolt-on to factory OEM rocker panel mounting points • Hardware: All mounting brackets and fasteners included Materials and Build Quality Vevor constructed these running boards from heavy-gauge carbon steel — the same category of material used in structural and industrial load-bearing applications. Carbon steel delivers a strength-to-weight advantage over cast aluminum alternatives, meaning these steps absorb heavy dynamic loads during entry and exit without deforming over time. The entire assembly receives a multi-layer rustproof protective coating that bonds to the steel surface and creates a barrier against road salt spray, moisture intrusion, freeze-thaw cycling, and UV-driven oxidation. This is critical for Tacoma owners in the Rust Belt, Pacific Northwest, and coastal markets where salt and humidity attack unprotected steel year-round. The matte black finish is not a simple spray paint — it is a hardened surface treatment designed to resist chipping, scratching, and fading through repeated boot contact and trail abuse. The non-slip hollow tread pattern is pressed directly into the step surface, creating physical grip geometry rather than relying solely on a coating that wears away. Installation Guide Installing these Vevor running boards on your 2024-2025 Toyota Tacoma Double Cab is a straightforward bolt-on process that requires basic hand tools and no professional fabrication. Start by parking the truck on a level surface and gathering a socket set (typically 10 mm and 12 mm), a torque wrench, and a helping hand if available. Step one: slide under the truck and locate the factory rocker panel mounting bosses along the lower body sill on each side — these are pre-threaded locations Toyota engineers specifically for side step accessories. Step two: position the supplied mounting brackets against the rocker panel mounting points. The brackets are handed (driver and passenger side are labeled), so confirm orientation before threading fasteners. Step three: loosely install all bracket bolts by hand to allow for minor positional adjustment before final torque. Step four: set the running board onto the mounted brackets and confirm it sits flush and level. Step five: torque all bracket-to-rocker and board-to-bracket fasteners to specification per the included instruction sheet. Step six: perform a load test by applying body weight progressively to confirm no movement, flex, or creak. Total installation time for most owners is 30 to 60 minutes. No drilling, cutting, welding, or dealership involvement required. What's in the Box • 2x Vevor 6-inch running board side steps (driver and passenger) • Complete mounting bracket set (pre-matched to 2024-2025 Tacoma Double Cab rocker geometry) • Full hardware kit (bolts, washers, and fasteners for both sides) • Installation instruction sheet Why Shop With Us We stock Vevor running boards and ship fast to all 50 US states. Our product listings are built with real fitment data — not guesswork — so you can order with confidence that the brackets, the step width, and the mounting geometry are correct for your 2024 or 2025 Tacoma Double Cab before the box even arrives. If there is ever a fitment question, our team is ready to assist. We stand behind every order with clear return and exchange policies so your purchase is protected from day one. Upgrade Your Tacoma Today Stop struggling with a high cab entry and start stepping up right. Add the Vevor 6-inch black carbon steel running boards to your cart now and give your 2024-2025 Toyota Tacoma Double Cab the durable, sharp-looking side steps it deserves — backed by 550 lbs of rated capacity and built to last through years of hard use.