12x 4 LED Recovery Strobe Flashing Truck Beacon Grille Light Lightbar Amber Lamp

When your crew is on the shoulder of a busy highway or in the middle of a construction zone, amber warning visibility isn't optional — it's the difference between a close call and a catastrophe. The 48-LED Amber Strobe Beacon Grille Light Bar delivers the bold, high-intensity signal that commands attention from 500+ feet away in full daylight, keeping your workers safe and your fleet compliant with roadside warning standards. This universal amber beacon bar is engineered to work on virtually every 12V or 24V vehicle in the US automotive and commercial market. Full-size pickups like the Ford F-150, RAM 1500, RAM 2500, Chevy Silverado 1500, and GMC Sierra 1500/2500 are all supported. Commercial and fleet vehicles — including the Ford Transit, Mercedes-Benz Sprinter, Ram ProMaster, Freightliner Cascadia, Kenworth T680, Peterbilt 389, Mack Anthem, and International LT — run the same 12V or 24V DC electrical systems this light bar is built for. Whether you manage a two-truck towing operation or a 50-vehicle utility fleet, one SKU covers the entire lineup. No additional adapters, no voltage converters, no wiring hacks required. • Broad 500+ Ft Daytime Visibility: 48 high-intensity LEDs arranged across 12 individual pods flood a wide horizontal arc with bright amber light, ensuring approaching drivers — even at highway speed — have ample reaction time. • Four Programmable Flash Patterns: Cycle through strobe burst, alternating left-right flash, simultaneous full-bar flash, and steady-on modes. Match the signal pattern to your specific situation — roadside recovery, construction site perimeter, or slow-moving convoy escort. • True Dual Voltage Operation: Engineered for both 12V DC (standard half-ton pickups, vans, SUVs) and 24V DC (heavy-duty Class 7/8 commercial trucks, European-spec vehicles). One bar handles your entire mixed fleet. • Ultra-Low Power Draw: At just 10–14 watts total, this bar runs continuously without straining your alternator or draining your battery during extended idle operations — critical for tow operators and utility crews on long shifts. • Surface-Mount Simplicity: The slim, low-profile housing adheres or brackets cleanly to grilles, bumper faces, push bars, or interior dash positions. No custom fabrication, no drilling into structural components required. • Pre-Wired Plug-and-Play Harness: Ships with a complete wiring harness and dedicated on/off switch. Most installers complete the job in under 20 minutes with basic hand tools. • LED Count: 48 total LEDs — 12 modular pods, 4 LEDs per pod • LED Color: Amber / SAE Yellow (peak wavelength ≈ 590–595 nm) • Input Voltage: DC 12V – 24V universal (no external converter needed) • Power Consumption: 10–14W total (varies by active flash mode) • Flash Modes: 4+ selectable strobe and flash patterns including steady-on • Visible Distance: 500+ feet in daylight conditions • Mounting Style: Surface mount — grille, bumper, push bar, or interior dash • Wiring: Pre-wired harness included with inline on/off switch • Operating Temperature: Suitable for all-season North American climates • Application: Roadside recovery, towing, construction, utility fleet, emergency signaling The housing of this beacon bar is constructed from impact-resistant ABS plastic, selected specifically because it balances light weight with the structural rigidity needed to withstand constant vibration on heavy commercial vehicles traveling rough roads and job site terrain. The lens covers are optically clear polycarbonate, which resists yellowing from UV exposure and maintains maximum light transmission across the full service life of the LEDs. The LED emitters themselves are rated for long operational hours, making the effective cost-per-use dramatically lower than incandescent or halogen warning lamps that require frequent bulb replacement. The compact, flat-profile pod design reduces aerodynamic drag to a minimum — an important consideration for highway tow trucks and interstate freight vehicles where fuel economy matters. Every electrical connection inside the harness is sheathed in weather-resistant insulation to handle rain, road spray, and temperature swings from desert summers to northern winters without corroding or causing intermittent shorts. Installing this amber beacon bar is a straightforward process that most owner-operators and fleet maintenance techs can complete without an auto electrician. Start by identifying your mounting surface — most users choose the front grille opening, the upper bumper face, or a roof-mounted push bar bracket. Clean the surface thoroughly with isopropyl alcohol and allow it to dry completely so any adhesive backing makes full contact. Position the light bar horizontally and confirm sight lines are unobstructed. Route the pre-wired harness toward your fuse box or auxiliary switch panel, keeping the wire run away from sharp edges and moving components by securing it every 12 inches with the included zip ties or OEM-style wire loom. Connect the positive lead to a fused 12V or 24V source — a 5-amp inline fuse is recommended — and the ground wire to a clean chassis ground point. Mount the on/off switch in a driver-accessible location inside the cab. Before finalizing any bracket hardware, power up the system and cycle through all four flash modes to confirm every pod is functioning. Tighten all mounting fasteners to manufacturer torque spec, tuck all excess wiring, and the installation is complete. Total time for an experienced installer: 15–25 minutes. • 1× 48-LED Amber Strobe Beacon Grille Light Bar (12 pods × 4 LEDs) • 1× Pre-wired power harness • 1× Inline on/off toggle switch • Mounting hardware (brackets / fasteners) • Installation instruction sheet At Expedite, we stock parts that real working fleets depend on — not showroom accessories. Our warehouse ships fast, our product pages give you the real specs, and our team understands the difference between a tow operator who needs a light bar today and someone browsing for fun. Every order ships with full tracking, and our US-based support team is ready to answer fitment and wiring questions before and after you buy. We carry the breadth of commercial and pickup accessories to keep your operation moving safely. Ready to put your fleet ahead of the next breakdown call? Add the 48-LED Amber Strobe Beacon Grille Light Bar to your cart now. At $28.49 per unit, outfitting an entire fleet has never been more cost-effective. Order today and get visible tomorrow.