2 Sets Of - 4-FOLD 5.5' Soft Tonneau Cover For F150 15-22 Ford F-150 F150 Truck 5.5FT--VX-A001-225397

Stop letting weather, theft, and wind drag eat into your hauling game. The Mankee 4-Fold Soft Tonneau Cover for the 2015–2022 Ford F-150 5.5-foot short bed delivers commercial-grade protection with the clean, flush look your truck deserves — and this dual-set listing means you can outfit two rigs or stock a spare at a price that simply works. Compatibility This cover is precision-engineered for the full 13th-generation Ford F-150 platform spanning model years 2015, 2016, 2017, 2018, 2019, 2020, 2021, and 2022. It fits the standard 5.5-foot (66-inch) short bed across every mainstream trim level — XL, XLT, Lariat, King Ranch, Platinum, and Limited. Before ordering, measure your bed box interior from the inside of the bulkhead panel to the inside of the tailgate; the measurement should read approximately 67 inches for a confirmed fit. This cover does NOT fit the F-150 Raptor, any F-250 or F-350 Super Duty variant, extended 6.5-foot or 8-foot beds, or trucks with aftermarket spray-in bed liners that reduce the interior rail width beyond factory spec. Fleet operators and resellers will appreciate that this listing ships as two complete, independent cover sets under one order. Benefits • All-Season Weather Defense: Marine-grade vinyl sheds rain, blocks UV degradation, and handles snow load so your tools, gear, and cargo stay bone-dry from Montana winters to Florida hurricane season. • 100% Full Bed Access in Seconds: The four-panel fold architecture lets you accordion the entire cover toward the cab without tools or removal — critical when you're loading lumber, kayaks, or oversized job-site materials on a deadline. • Improved Fuel Economy: The low-profile, flush-mount design reduces aerodynamic drag compared to an open bed, translating to real MPG gains on highway runs and long fleet routes. • No-Drill, No-Damage Installation: Clamp-on aluminum rails attach to the factory bed rail without drilling a single hole — preserving your truck's resale value and letting you swap the cover in under 30 minutes. • Matte Black Stealth Aesthetic: The matte black vinyl top paired with black anodized aluminum rails integrates seamlessly with any F-150 exterior color, from Carbonized Gray to Agate Black to Oxford White. • Fleet-Ready Value: Bundled as two complete sets, this listing cuts per-unit cost for fleet managers, body shops, and resellers managing multiple F-150 work trucks simultaneously. Technical Specs • Bed Fit: 5.5 ft / 66-inch Ford F-150 short bed (2015–2022, 13th Gen) • Panel Configuration: 4 independent fold-out panels • Cover Material: Heavy-duty marine-grade vinyl top skin • Frame / Rail Material: Powder-coated aluminum extrusion rails • Finish: Matte black vinyl top panel; black anodized aluminum side rails • Installation Method: Clamp-on, no-drill — attaches to factory bed rail lip • Bundle Quantity: 2 complete cover sets per order • Approximate Folded Stack Height: Low-profile stack folds flush to cab rear window Materials & Build Quality Mankee sources a heavy-duty marine-grade vinyl for the top skin — the same category of material used in boat covers and outdoor commercial applications where UV exposure, temperature swings, and moisture are daily realities. The vinyl is stitched and sealed at the seams to prevent water intrusion even during prolonged downpours or car-wash cycles. The structural skeleton is built from powder-coated aluminum extrusions: lightweight enough to keep the overall panel weight manageable for one-person folding, yet rigid enough to resist flex and panel sag under snow accumulation. The aluminum side rails receive a black anodized finish that resists corrosion from road salt, rain, and pressure washing — a critical spec for trucks operating in the Rust Belt, Pacific Northwest, or any region with aggressive seasonal weather. Latching hardware is constructed from reinforced ABS plastic and zinc-coated steel fasteners to prevent galvanic corrosion where dissimilar metals meet the aluminum rail. Every panel hinge is engineered for repeated fold-and-unfold cycles without loosening or creaking over time, ensuring the cover performs as well on day 500 as it does on day one. Installation Guide Installing the Mankee soft tonneau cover on your 2015–2022 F-150 5.5-foot bed requires no drilling, no professional help, and typically takes 20–30 minutes with basic hand tools. Step 1: Unbox both rail assemblies and lay them alongside the truck bed to identify the driver-side and passenger-side rails by the pre-drilled clamp positions. Step 2: Set the front cross-bar into the bed against the bulkhead, aligning the mounting clamps over the bed rail lip on both sides. Step 3: Hand-thread the clamp bolts under the rail lip until snug — do not fully torque yet. Step 4: Slide the side rails along the bed rail from front to back, ensuring the front cross-bar sits flush against the bulkhead seal. Step 5: Set the rear cross-bar at the tailgate end and hand-thread its clamps in the same fashion. Step 6: With all four corners aligned and the cover laying flat, tighten all clamp bolts in a cross pattern to the recommended torque (typically 8–10 ft-lbs with a 10mm socket). Step 7: Open and close the tailgate to confirm clearance, then fold the panels forward once to verify the hinge action and panel alignment. Step 8: Adjust any clamp positions as needed for a perfectly flush fit, then re-torque. No bed liner removal is required provided the factory plastic liner is present; aftermarket spray-in liners should be measured for interior rail width before ordering. What's in the Box • 2 × Mankee 4-fold soft tonneau cover assemblies (each with 4 pre-hinged vinyl panels) • 2 × Driver-side powder-coated aluminum rail • 2 × Passenger-side powder-coated aluminum rail • 2 × Front bulkhead cross-bar with foam seal • 2 × Rear tailgate cross-bar with foam seal • 2 × Sets of no-drill clamp hardware (bolts, clamps, and washers) • 2 × Installation instruction sheets Why Shop With Us We specialize in truck accessories for working pickups and commercial fleets, which means we vet products against real-world fitment data — not just catalog listings. Every order ships with full tracking, and our US-based support team knows F-150 bed specs cold. Whether you're outfitting a single personal truck or managing a fleet of ten, we can answer fitment questions before you buy and stand behind the product after it arrives. Ready to protect your cargo and sharpen your F-150's profile? Add both sets to your cart now and lock in fleet pricing on the Mankee 4-Fold Soft Tonneau Cover — built for the 2015–2022 Ford F-150 5.5-foot short bed and ready to ship today.