Trailer Ladder Rack, 54" 3 Crossbars Ladder Roof Rack, Heavy-duty Steel Van Roof Ladder Rack, 800 Lbs Capacity Van Ladder Rack With Straps, Fit For Ford Transit 150, 250, 350, 2015-2022

When your crew needs ladders, conduit, scaffold planks, and lumber on the job site before 7 a.m., a lightweight, undersized rack is a liability you can't afford. The Vevor 54" 3-Crossbar Heavy-Duty Steel Roof Ladder Rack is engineered for working professionals who demand maximum payload, bulletproof durability, and zero surprises. This rack is precision-designed to fit 2015-2022 Ford Transit 150, 250, and 350 cargo vans — the third-generation Transit platform favored by plumbers, electricians, HVAC technicians, painters, and general contractors nationwide. The adjustable upright posts and universal clamping feet are engineered to grip the factory raised side rails found on third-gen Transit models securely, covering low-roof, medium-roof, and high-roof variants. If you run a regular wheelbase or an extended wheelbase Transit, verify your specific roof rail configuration before ordering to guarantee a flush, rattle-free fit. Unlike universal "fits-anything" racks that leave gaps and require improvised shimming, this Vevor rack locks down tight to the Transit's native rail geometry so your load stays exactly where you put it — even on the highway at 70 mph. • 800 LB Static Load Capacity: Rated to hold up to 800 pounds of evenly distributed cargo — enough for two full-size extension ladders, bundled copper pipe, long PVC runs, aluminum scaffold planks, or heavy conduit without flex, sag, or stress deformation at the upright post connections. • 3 Full-Width Steel Crossbars: Three crossbars spanning the entire 54-inch rack width distribute load across multiple contact points. Single-bar designs concentrate stress and fatigue faster; three bars mean your heaviest loads ride flat and stable. • Factory-Included Ratchet Tie-Down Straps: Straps ship in the box so you can cinch your first load the same day the rack arrives. No scrambling at the hardware store before a Monday morning job run. • Adjustable Upright Post Height: Telescoping uprights accommodate the Transit's raised side rail height across all three roof options, so you don't need spacers or custom brackets to get a level, stable crossbar plane. • Black Powder-Coat Finish: The heavy-gauge steel frame and crossbars are finished in a durable matte black powder coat that resists chipping, rust, and UV fade through years of outdoor exposure and pressure washing. • Wide 54-Inch Crossbar Span: The generous rack width accommodates wide ladder stiles and oversized materials that narrower commercial racks simply can't support without the load hanging over the edges dangerously. • Rack Width: 54 inches (crossbar span, side to side) • Number of Crossbars: 3 • Load Capacity: 800 lbs static, evenly distributed • Upright Post Height: Adjustable (accommodates Transit low, medium, and high roof rail heights) • Frame Material: Heavy-gauge steel • Surface Finish: Black powder coat • Included Accessories: Ratchet tie-down straps • Vehicle Fitment: 2015-2022 Ford Transit 150, 250, 350 with factory raised side roof rails The Vevor Transit ladder rack is fabricated from heavy-gauge steel throughout — uprights, crossbars, and mounting feet are all the same robust steel construction rather than mixing light-gauge components at critical stress points as cheaper racks do. The black powder-coat finish is applied electrostatically and cured at high temperature to bond to the steel surface rather than sitting on top of it, which means it won't peel, flake, or bubble when water and grime work their way into rack-to-rail contact zones over months of field use. The clamping feet are finished with rubber contact pads that protect the Transit's factory roof rails from scratching and gouging while increasing the friction coefficient of the clamp grip. Every weld joint on the upright-to-crossbar intersections is full-penetration rather than tack-welded, which matters when the rack is loaded to near capacity and subjected to road vibration over a full work week. This is a commercial-grade tool built to the demands of daily professional use, not a weekend recreation rack that happens to hold ladders. Installing this Vevor ladder rack on your Ford Transit is a manageable one- or two-person job that requires no drilling, cutting, or modification to your van's roof or factory rails. Start by unboxing all components and laying them out flat to verify you have the uprights, crossbars, clamping feet, hardware kit, and straps. Loosen the upright post adjustment bolts and extend each post to the height that matches your specific Transit roof rail — low, medium, or high roof. Position the first upright assembly at the rear of the factory raised side rail, aligning the rubber-padded clamping foot squarely on top of the rail. Hand-tighten the clamp bolt to hold position. Repeat for the forward upright on the same side. With both uprights lightly clamped on the driver's side, move to the passenger side and repeat the process, using a tape measure to confirm both front uprights are equidistant from the front edge of the roof rail and both rear uprights are equidistant from the rear edge — symmetry here eliminates the side-to-side rocking that causes hardware fatigue over time. Once all four uprights are aligned, torque each clamp bolt to the manufacturer's specified value using a torque wrench, working in a cross-pattern (front driver, rear passenger, rear driver, front passenger) to apply even clamping pressure. Slide the three steel crossbars into the upright brackets in the sequence indicated in the instruction sheet, insert the crossbar retention bolts, and torque to spec. Load your first course of ladders, thread the included ratchet straps over the load and hook them to the crossbar anchor points, and ratchet to firm tension. Perform a final shake test and re-torque after the first 50 miles of driving. • 1 × 54-inch heavy-duty steel ladder rack assembly (uprights + crossbars pre-staged) • 1 × Hardware kit (clamp bolts, retention bolts, washers, rubber rail pads) • 1 × Set of ratchet tie-down straps • 1 × Installation instruction sheet At Expedite Parts, we stock commercial van accessories selected specifically for working professionals who can't afford downtime waiting on the wrong part. Every Vevor rack in our catalog is verified for Transit fitment before it goes live. We ship fast, answer fitment questions directly, and back every order with straightforward returns. You're not buying from a faceless marketplace listing — you're buying from a team that knows Ford Transit builds. Stop losing billable hours to undersized racks that sag, slip, or corrode after a single season. The Vevor 54" 3-Crossbar Heavy-Duty Steel Roof Ladder Rack is in stock and ready to ship. Add it to your cart today and get your 2015-2022 Ford Transit 150, 250, or 350 loaded out for the job site.