5.5FT 66 Soft Tonneau Cover Roll Up For T Oyota 2014-2019 Tundra Short Truck Bed--A86313-M44402F

Stop letting your Tundra's bed take a beating from the weather, theft, and road grime. The Mankee Soft Roll-Up Tonneau Cover for the 2014-2019 Toyota Tundra 5.5-foot short bed delivers rugged, no-fuss protection at a price that makes sense for working truck owners and weekend adventurers alike. COMPATIBILITY This Mankee tonneau cover is precision-engineered exclusively for the 2014, 2015, 2016, 2017, 2018, and 2019 Toyota Tundra equipped with the 5.5-foot (66-inch) short truck bed. It is fully compatible with both the CrewMax and Double Cab body styles that use this bed length. Before ordering, verify your exact bed length by measuring from the inside face of the bulkhead to the inside face of the tailgate. This cover is NOT compatible with the Tundra's 6.5-foot or 8.1-foot bed configurations. If your Tundra has factory stake-pocket rails, installation requires zero drilling — the included clamps anchor directly into existing pockets, preserving your bed's integrity and factory warranty on the rail system. BENEFITS • Weather Protection: The heavy-duty vinyl surface is engineered to repel rain, UV rays, and road spray in every season, keeping your tools, camping gear, and construction supplies bone-dry mile after mile. • Instant Full or Partial Bed Access: The roll-up design lets you open the cover completely or partially in seconds — no tools, no fumbling, no removing the entire cover when you need to load oversized cargo. • Improved Fuel Economy: The low-profile, flush-fitting design reduces aerodynamic drag versus an open bed, delivering real-world highway mpg improvements you can feel at the pump over time. • Security Through Concealment: Out of sight means out of mind for opportunistic theft. Keeping tools, electronics, and valuables hidden in parking lots and on job sites is your first line of defense. • Lightweight, Bulk-Free Design: Unlike hard folding or retractable covers, this soft roll-up adds minimal weight to your Tundra and won't negatively affect payload ratings or bed utility. • Maintains Tailgate Function: The cover works with your factory tailgate and does not require any permanent modifications, so you retain full use of every factory feature. TECHNICAL SPECS • Bed Fit: 5.5-foot (66-inch) Toyota Tundra short bed, 2014–2019 • Compatible Cab Styles: CrewMax, Double Cab • Cover Surface Material: Heavy-duty UV-resistant vinyl • Frame Construction: Aluminum alloy support bows • Installation Method: Stake-pocket clamp system, no drilling required • Seal Type: Foam-padded perimeter weather seal for moisture control • Cover Position Options: Fully closed, partially rolled, fully rolled toward cab • Hardware Included: Yes — all mounting clamps and fasteners included MATERIALS & BUILD QUALITY The Mankee tonneau cover is built around a durable aluminum alloy bow framework that resists corrosion and maintains its shape through years of daily use, extreme heat, freezing winters, and the vibration stress of rough roads. The top surface is a multi-layer heavy-duty vinyl compound treated for UV resistance, which prevents fading, cracking, and brittleness — common failure points on cheaper covers after just one or two seasons. The perimeter weather seal is constructed from dense foam that compresses firmly against your bed rails and tailgate, creating a tight moisture barrier without relying on adhesive strips that dry out and fail over time. Every seam in the vinyl is double-stitched and reinforced at stress points, ensuring the cover holds its shape and structural integrity under heavy wind load at highway speeds. The clamp hardware is corrosion-resistant and sized specifically for the Tundra's stake-pocket dimensions, eliminating the sloppy fitment that plagues universal-fit covers. Overall, this is a cover built for the demands of working truck owners — not just weekend show trucks. INSTALLATION GUIDE Installing the Mankee soft roll-up tonneau cover on your 2014-2019 Toyota Tundra is a straightforward process requiring no drilling, no special tools, and typically takes 20 to 30 minutes. Step 1: Unbox all components and lay them out — you should have the vinyl cover panel, aluminum support bows, side rails, stake-pocket clamps, and hardware bag. Step 2: Place the two side rails along the top of your Tundra's bed rails, aligning the stake-pocket clamp tabs with the existing pockets in your bed. Step 3: Tighten the stake-pocket clamps from below using the included wrench or a standard 10mm socket until the rails are firmly seated with no lateral movement. Step 4: Snap the aluminum cross bows into the rail channels at the designated slots, spacing them evenly across the bed length. Step 5: Lay the vinyl tonneau cover panel over the bow framework, aligning the front edge flush with the cab-end bulkhead. Step 6: Secure the front hook-and-loop or latch fasteners at the bulkhead. Step 7: Smooth the vinyl rearward over each bow, then secure any side tension straps if included. Step 8: Close the tailgate and inspect the rear seal for even contact. Adjust clamp tension if needed for a flush, rattle-free fit. One person can complete this installation solo, though a second set of hands makes bow placement easier. WHAT'S IN THE BOX • 1x Mankee soft roll-up vinyl tonneau cover panel • 2x Aluminum alloy side mounting rails • 3x Aluminum cross-support bows • 4x Stake-pocket mounting clamps with hardware • 1x Foam perimeter weather seal (pre-applied or separate strip) • 1x Installation hardware bag with all required fasteners • 1x Instruction sheet WHY SHOP EXPEDITE At Expedite, we specialize in truck accessories for real working vehicles — not showroom queens. We hand-select products like the Mankee Tundra tonneau cover because they deliver genuine value: correct fitment, honest materials, and a price that reflects what you're actually getting. Orders ship promptly, and our US-based support team knows Toyota Tundra fitment inside and out. If you have a compatibility question before buying or need help post-purchase, we're a real conversation away — not a chatbot loop. We stand behind every product we sell. Protect your Tundra's cargo today. Add the Mankee Soft Roll-Up Tonneau Cover to your cart now and get your 5.5-foot short bed covered — no drilling, no hassle, and no regrets.