Running Boards, 6 Inches Side Steps Compatible With 2009-2018 Dodge Ram 1500 Crew Cab, 2010-2025 Dodge Ram 2500 3500 Crew Cab

Getting in and out of a tall RAM Crew Cab shouldn't be a workout. Whether your truck sits at stock height or is riding on a leveling kit, the Vevor 6-Inch Running Boards give every driver, passenger, and job-site crew member a wide, secure step platform that makes every entry and exit feel effortless and safe. These side steps are precision-engineered to fit 2009-2018 Dodge RAM 1500 Crew Cab and 2010-2025 Dodge RAM 2500 and 3500 Crew Cab models. The bolt-on mounting system aligns directly with existing factory frame holes on compatible builds, eliminating the need to drill into your truck's body on most installations. Whether you operate a work-spec RAM 2500 diesel pulling a fifth wheel across the plains or a daily-driver RAM 1500 Crew Cab navigating school pickup and weekend trails, these boards slot in cleanly without modification. Important: This fitment covers Crew Cab body styles only. Regular Cab and Quad Cab configurations are not compatible — confirm your cab style before ordering. • Wide 6-inch (152 mm) flat step surface delivers generous foot room for adults in steel-toed boots and children in sneakers alike, making every cab entry and exit confident and controlled • Anti-slip textured step pad grips boot soles, work shoes, and sneakers in wet, muddy, snowy, and icy conditions — essential for northern fleet operators and off-road builds where traction is non-negotiable • Heavy-duty steel construction absorbs repeated daily loading without flex, fatigue, or visible sag, built to outlast lighter aluminum alternatives on demanding work trucks • Powder-coat black finish creates a sealed barrier against road salt corrosion, UV fading, and stone chip damage whether you're running winter roads in Minnesota or summer heat in Arizona • Low-profile bracket design minimizes ground clearance loss — critical for RAM 2500 and 3500 operators navigating uneven terrain, construction sites, and off-pavement routes • Dual-mount bracket system distributes dynamic load across multiple frame points rather than concentrating stress at a single attachment, extending the lifespan of both the board and the mounting hardware • Step Width: 6 inches (152 mm) flat standing surface • Board Length: Full-length coverage spanning both front and rear Crew Cab door openings • Material: Heavy-duty steel with welded construction • Finish: Powder-coat matte black, UV and corrosion resistant • Mounting: Bolt-on bracket system, no drilling required on most compatible vehicles • Bracket Type: Dual-mount low-profile design for minimized clearance impact • Fitment: 2009-2018 Dodge RAM 1500 Crew Cab; 2010-2025 Dodge RAM 2500 & 3500 Crew Cab • Hardware: Complete installation hardware kit included The Vevor 6-Inch Running Boards are fabricated from heavy-gauge steel using welded seam construction that eliminates the weak points found in stamped or riveted assemblies. The entire exterior is finished in a multi-stage powder-coat process: the steel is first cleaned and primed to remove mill scale and surface contaminants, then electrostatically coated with a thick matte-black polyester powder and cured at high temperature. The result is a finish that bonds chemically to the metal rather than sitting on top of it, delivering resistance to road salt brine used on northern highways, stone chips kicked up by highway driving, and prolonged UV exposure in sun-belt states. Unlike chrome or polished aluminum alternatives that show scratches and corrosion quickly on a work truck, this matte-black finish stays presentable through years of hard use without demanding special cleaning products or polishing schedules. Installing these running boards on your RAM Crew Cab is a straightforward two-person job that most owners complete in under two hours with basic hand tools. Start by safely lifting your truck on a quality floor jack and placing it on jack stands — never work beneath a vehicle supported only by a jack. Locate the factory frame mounting holes along the rocker panel area beneath both the front and rear Crew Cab doors; these are pre-existing holes that the Vevor bracket system is engineered to match. Dry-fit the brackets first, confirming each aligns correctly with the frame holes before threading any hardware. Insert the provided grade-specific bolts through the bracket tabs and into the frame holes, hand-tightening only at this stage. With both side brackets loosely mounted, position the running board onto the bracket tabs and verify it sits level and flush beneath both door openings. Once alignment is confirmed, torque all bracket-to-frame fasteners to specification using a torque wrench — do not rely on feel alone, as overtightening can strip threads and undertightening risks movement under load. Finally, secure the running board to the brackets, double-check all connections, lower the truck, and test each step surface with your full body weight before putting the vehicle back into service. • (2) Vevor 6-inch steel running board panels, powder-coat black • (4) Low-profile dual-mount steel brackets • Complete hardware kit: grade bolts, washers, and locking fasteners • Installation instruction sheet At Expedite, we source truck accessories built to work as hard as the vehicles they go on. Every product in our catalog is vetted for fitment accuracy, build quality, and value so you can order with confidence and get back on the road fast. We offer transparent product data, detailed compatibility guidance, and responsive customer support — because a running board that doesn't fit or fails in the first season isn't a deal, it's a headache. Ready to step up your RAM Crew Cab's functionality and curb appeal? Add the Vevor 6-Inch Running Boards to your cart today and enjoy a cleaner, safer entry and exit on every drive — whether that's a job site Monday morning or a trailhead Saturday at dawn.