Stainless Steel Angled Spring Loaded Mud Flap Hangers, 2-1/2" Bolt Spacing Mudflap Hangers For Semi Trucks, 1 Pair Heavy Duty Semi Truck Mud Flap Hanger Set With Reflective Strips, Silver

Protect your rig, stay DOT-compliant, and keep debris off the road with the Vevor Stainless Steel Angled Spring Loaded Mud Flap Hangers. Built for the punishment of long-haul trucking, this 1-pair set combines corrosion-resistant stainless steel construction with an angled, spring-loaded design that absorbs road shock and snaps back into position — mile after mile. Compatibility These mud flap hangers are engineered for Class 6, 7, and 8 semi trucks and commercial vehicles that use a standard 2-1/2" bolt spacing mounting configuration. Common applications include Freightliner Cascadia, Kenworth T680 and W900, Peterbilt 389 and 579, Volvo VNL, Mack Anthem, and International LT Series. They are also compatible with many regional delivery fleets operating medium-duty box trucks and vocational vehicles where frame-rail mud flap mounting is required. Always verify your existing bolt spacing before ordering. If your truck runs a 2-1/2" center-to-center bolt pattern on the fender or frame bracket, these hangers are a direct replacement or upgrade. Key Benefits • Spring-loaded angled design flexes on impact and returns to position, dramatically reducing hanger breakage caused by road debris, dock strikes, and rough terrain. • Full stainless steel construction resists rust, road salt, and chemical exposure — outlasting painted or galvanized alternatives on winter routes and coastal runs. • Built-in reflective strips increase rear visibility in low-light and nighttime conditions, supporting DOT safety requirements for commercial vehicles. • 2-1/2" bolt spacing matches OEM and aftermarket mounting patterns on the most common North American semi truck platforms, making replacement straightforward. • Sold as a matched 1-pair set so both driver and passenger sides are replaced simultaneously, ensuring uniform mud flap positioning and even wear. • Heavy-duty rated construction handles full-size rubber or rubber-backed mud flaps on loaded tractor-trailers operating at GVW up to 80,000 lbs. Technical Specifications • Bolt Spacing: 2-1/2" (63.5 mm) center-to-center • Quantity: 1 pair (2 hangers) • Material: Grade stainless steel • Finish: Brushed silver / natural stainless • Hanger Style: Angled, spring-loaded • Reflective Strips: Included, pre-applied • Hardware: Mounting bolts and hardware included (verify with listing images) • Application Class: Class 6 / 7 / 8 semi trucks and commercial vehicles Materials and Build Quality The Vevor mud flap hangers are fabricated from heavy-gauge stainless steel chosen specifically for high-cycle flex durability. Unlike mild steel brackets that corrode within a single winter season, stainless steel maintains its structural integrity and appearance even when exposed to road brine, diesel exhaust wash, pressure washing, and UV cycling over years of service. The angled geometry is not merely cosmetic — it positions the mud flap at the optimal trailing angle to deflect spray and debris downward rather than horizontally into passing vehicles or cyclists. The integrated spring mechanism is calibrated for commercial-grade loads; it provides enough resistance to hold a heavy rubber mud flap firmly at highway speed while still allowing deflection when the flap contacts a loading dock bumper, a curb, or deep snow accumulation. The reflective strips are bonded directly to the hanger body, not added as a secondary clip-on, so they remain securely in place through pressure washing and vibration. This is a purpose-built commercial trucking component, not a light-duty accessory repurposed for fleet use. Installation Guide Installing these mud flap hangers is a straightforward process that most owner-operators and fleet maintenance technicians can complete with basic hand tools. Begin by safely positioning your tractor or truck on a level surface and chocking the wheels. Identify the existing mud flap hanger mounting location on the rear frame rail or fender bracket. Using a socket wrench, remove the existing worn or damaged hanger bolts and slide the old hanger free from the bracket. Clean the mounting surface with a wire brush to remove rust scale and debris, which ensures a flush, rattle-free installation. Position the new Vevor hanger against the mounting bracket, aligning the 2-1/2" bolt holes to the existing holes on your truck's frame or fender. Insert the provided mounting hardware and hand-tighten initially to confirm alignment. Once both bolt holes are aligned and the hanger sits flush, torque the fasteners to the specification recommended in your truck's service manual — typically 35-50 ft-lbs for this class of hardware. Attach your mud flap to the hanger using the flap's existing mounting holes, confirm the flap hangs at the correct height above the road surface per FMCSA guidelines, and verify the reflective strips face rearward for maximum visibility. Repeat on the opposite side. The entire installation typically takes 20-30 minutes per side. No drilling, cutting, or welding is required when replacing a standard 2-1/2" bolt-spacing hanger. What's in the Box • 2x Stainless steel angled spring-loaded mud flap hangers (1 pair) • Reflective strips (pre-applied) • Mounting hardware set • Product instruction sheet Why Shop With Us When you purchase through our store, you get a verified product backed by a 30-day defect warranty and order tracking from the day you check out. Our listings are sourced from quality-vetted suppliers, and our customer support team is available to assist with fitment questions, returns, and replacements. We understand that downtime is money in commercial trucking — that's why we work to get orders processed and moving quickly, with estimated delivery in approximately 10 days. Every order ships with full tracking so you always know exactly where your parts are. Upgrade your mud flap mounting hardware today. Add the Vevor Stainless Steel Spring Loaded Mud Flap Hangers to your cart now and keep your rig road-ready, compliant, and protected for thousands of miles ahead.